• 제목/요약/키워드: Scanning stage

검색결과 450건 처리시간 0.027초

Gastrointestinal Myiasis by Larvae of Sarcophaga sp. and Oestrus sp. in Egypt: Report of Cases, and Endoscopical and Morphological Studies

  • Ahmad, Azza K.;Abdel-Hafeez, Ekhlas H.;Makhloof, Madiha;Abdel-Raheem, Ehab M.
    • Parasites, Hosts and Diseases
    • /
    • 제49권1호
    • /
    • pp.51-57
    • /
    • 2011
  • Four cases of gastric or intestinal myiasis are reported. The cases contain 2 males (1 child 10 years old, and 1 adult 40 years old) and 2 females (1 girl 18 years old, and 1 adult 50 years old) from Minia Governorate, Southern Egypt. Three of them, including cases no. 1, 3, and 4, were gastric myiasis, and complained of offensive hematemesis of bright red blood. Minute moving worms, larvae of the fly, were found in the vomitus. On the other hand, case no. 2 had intestinal myiasis, and complained of abdominal distention, nausea, vomiting, and diarrhea. The stool of case 2 was mixed with blood, and minute moving worms were observed in the stool. Endoscopy was performed to explore any pathological changes in the stomach of the patients. The larvae were collected and studied macroscopically, microscopically, and using a scanning electron microscope (SEM) to identify their species. Three different types of larvae were identified. The larvae isolated from case 1 were diagnosed as the second stage larvae of Sarcophaga species, and the larvae isolated from case 2 were the third stage larvae of Sarcophaga species. On the other hand, the larvae isolated from cases 3 and 4 were diagnosed as the third stage larvae of Oestrus species.

감나무 둥근무늬낙엽병균 Mycosphaerella nawae의 불완전 세대 동정 (Identification of the Imperfect Stage of Mycosphaerella nawae Causing Circular Leaf Spot of Persimmon in Korea)

  • 권진혁;강수웅;박창석;김희규
    • 한국식물병리학회지
    • /
    • 제14권5호
    • /
    • pp.397-401
    • /
    • 1998
  • Asexual spores of Mycosphaerella nawae were profusely produced on PDA after a prolonged incubation at $25^{\circ}C$ for 90 days. When persimmon trees were artificially inoculated by the conidial suspension, typical symptoms of circular leaf spot of persimmon appeared on the leaves two month later. The imperfect stag of the fungus was identified as Ramularia sp. based on following morphological characteristics examined under a light microscope and a scanning electron microscope. Conidia were mostly ellipsoid, but occasionally cylindrical, elongated oval, taro, peanut or gourd shapes and measured as 12.2~32.6$\times$6.1~10.2 ${\mu}{\textrm}{m}$. erect, hyaline, colorless-light brown. Conidia were formed solitarily or in chains on a medium and infected leaves. Conidiophore was erect, hyaline, colorless-light brown. and the size was 20.4~102.0$\times$3.1~10.2 ${\mu}{\textrm}{m}$, respectively. In this paper, we firstly demonstratrated that asexual spores of M. nawae induced persimmon circular leaf spot in nature as well as sexual spores of the fungus. Therefore, it is hypothesized that the imperfect stage of the fungus plays an important role in nature for epidemics as secondary inoculum.

  • PDF

다중 센서 융합을 사용한 자동차형 로봇의 효율적인 실외 지역 위치 추정 방법 (An Efficient Outdoor Localization Method Using Multi-Sensor Fusion for Car-Like Robots)

  • 배상훈;김병국
    • 제어로봇시스템학회논문지
    • /
    • 제17권10호
    • /
    • pp.995-1005
    • /
    • 2011
  • An efficient outdoor local localization method is suggested using multi-sensor fusion with MU-EKF (Multi-Update Extended Kalman Filter) for car-like mobile robots. In outdoor environments, where mobile robots are used for explorations or military services, accurate localization with multiple sensors is indispensable. In this paper, multi-sensor fusion outdoor local localization algorithm is proposed, which fuses sensor data from LRF (Laser Range Finder), Encoder, and GPS. First, encoder data is used for the prediction stage of MU-EKF. Then the LRF data obtained by scanning the environment is used to extract objects, and estimates the robot position and orientation by mapping with map objects, as the first update stage of MU-EKF. This estimation is finally fused with GPS as the second update stage of MU-EKF. This MU-EKF algorithm can also fuse more than three sensor data efficiently even with different sensor data sampling periods, and ensures high accuracy in localization. The validity of the proposed algorithm is revealed via experiments.

각종 전분으로 만든 교질상 식품의 특성에 관한 연구 - 녹두 전분의 이화학적 특성 - (Characterization of Mungbean (Phaseolus aureus L.) Starch)

  • 김완수;이혜수;김성곤
    • Applied Biological Chemistry
    • /
    • 제23권3호
    • /
    • pp.166-172
    • /
    • 1980
  • 광학 현미경 및 Scanning electron microscopy로 관찰한 녹두 전분 입자는 타원형 및 구형으로서 너비는 $8{\sim}13{\mu}m$, 길이는 $18{\sim}30{\mu}$이었다. X-ray 회절도는 $2{\theta}$$16.9^{\circ}$에서 약간의 결정성을 보였다. 전분의 blue value는 0.36, 아밀로스 함량은 22.7%, 알카리 수는 8.52, ferricyanide 수는 1.06물 결함 능력은 81.6%이었다. 전분의 팽윤은 $50^{\circ}C$까지는 큰 변화가 없었고, 이후 급격히 증가하였다. 전분 현탁액(0.3%)의 광 투과도는 $65^{\circ}C$ 이후 급격히 증가하였으며, $65{\sim}90^{\circ}C$에서는 Single stage의 호화 양상을 보였다. 아밀로그래프에 의한 전분의 호화는 농도(건물중으로 6,7 및 8%)에 관계없이 최고 점도는 나타나지 않았다. 전분 gel(건물중으로 40% 농도)의 retrogradation시 시간상수는 $21^{\circ}C$에서 1.99일이었다.

  • PDF

임플란트 구성요소의 파절면에 관한 주사전자현미경적 연구 - Part I: 임플란트 고정체 (Fracture Analysis of Implant Components using Scanning Electron Microscope - Part I : Implant Fixture)

  • 임광길;김대곤;조리라;박찬진
    • 구강회복응용과학지
    • /
    • 제26권3호
    • /
    • pp.297-309
    • /
    • 2010
  • 보철물의 실패는 파절로 인해 다수 발생하게 되지만 파절 발생시 그 원인을 파악하는 것은 어렵다. 보철물의 실패를 예방하고 예후를 예측하기 위해 보철물의 원인을 분석하는 것이 중요하며, 원인을 밝히기 위해 파절면 분석을 시행하게 된다. 파절면 분석은 파절면 뿐 아니라 주위 환경(응력 상황)에 대한 분석이 동반되며, 이를 이용하여 균열 진행, 파절 양상, 파절 원인 등을 파악하게 된다. 이 연구의 목적은 임상적으로 기능 후 파절된 임플란트 고정체의 파절면 분석을 시행하여 파절 기전 및 파절 원인(하중 양상)을 밝히는 것이다. 파절된 임플란트 고정체는 3년간 강릉-원주 대학교에 임플란트 고정체의 파절을 주소로 내원한 환자를 대상으로 수집하였다. 먼저 임상 및 방사선 사진 분석을 하였으며, 시편 세척 과정을 거쳐 주사 전자 현미경을 이용한 파절면 분석을 시행하였다. 임플란트 파절면 분석 시 피로 줄무늬, 벽개 파절 등의 파절 지표를 통해 피로 파절로 인해 파절이 발생되었음을 확인할 수 있었다.

소형 CW Sub-THz 시스템을 이용한 테라헤르츠 이미징 (Terahertz Imaging Using Compact Continuous Wave Sub-Terahertz System)

  • 장진석;권일범;윤동진;서대철
    • 한국전자파학회논문지
    • /
    • 제21권4호
    • /
    • pp.340-351
    • /
    • 2010
  • 전기적인 장치를 기반으로 한 테라헤르츠 송신기(Terahertz Transmitter: Tx)를 이용하여 0.34 THz의 전자기파를 발생시키는 소형 CW sub-THz 이미징 시스템을 제시하였다. Tx에 의해 발생된 0.34 THz의 전자기파는 테라 헤르츠 수신기(Terahertz Receiver: Rx)를 이용하여 샘플의 진폭(magnitude)과 위상(phase) 정보를 각각 측정하였다. 이 논문에서는 보다 좋은 이미지 해상도를 얻기 위하여 데이터 수집 시 이미지의 분해능(resolution)에 영향을 미치는 주사 스테이지(scanning stage)의 시간 지연과 스텝 거리를 변수로 두어 다양한 샘플들을 주사하여 그 결과를 측정, 비교하였다. 또한 플라스틱, 종이, 나무 등 다양한 샘플들의 이미징 측정을 통해 테라헤르츠 파의 응용 가능성을 확인하였다.

소형 CW Sub-THz 이미징 시스템을 이용한 물체의 비파괴 이미징 (Nondestructive Imaging of an Object Using the Compact Continuous-Wave Sub-Terahertz Imaging System)

  • 장진석;권일범;윤동진;서대철
    • 비파괴검사학회지
    • /
    • 제30권4호
    • /
    • pp.352-358
    • /
    • 2010
  • 전기적인 장치를 기반으로 한 테라헤르츠 송신기(terahertz transmitter; Tx)를 이용하여 0.34 THz의 전자기파를 발생시키는 소형 CW sub-THz 이미징 시스템을 제시하였다. Tx에 의해 발생된 0.34 THz의 전자기파를 point by point 스캔방식으로 샘플에 투과시켰고, 여기서 얻어진 데이터는 테라헤르츠 수신기(terahertz receiver; Rx)를 이용하여 진폭(magnitude)과 위상(phase) 정보로 측정한 후 이를 영상화하였다. 이 논문에서는 보다 좋은 이미지 해상도를 얻기 위하여 데이터 수집 시 이미지의 분해능(resolution)에 영향을 미치는 주사 스테이지(scanning stage)의 시간지연과 스텝거리를 변수로 두어 다양한 샘플들을 주사하여 그 결과를 측정, 비교하였다. 또한 플라스틱, 종이, 나무 등 다양한 샘플들의 이미징 측정을 통해 테라헤르츠 파의 응용 가능성을 확인하였다.

방사선조사가 백서 구치 법랑질형성에 미치는 영향에 관한 주사전자현미경적 연구 (A SEM STUDY OF RADIATION EFFECTS ON THE RAT MOLAR ENAMEL FORMATION)

  • 이경호;박태원
    • 치과방사선
    • /
    • 제25권2호
    • /
    • pp.409-422
    • /
    • 1995
  • The purpose of this study was to investigate the effects of radiation on the formation of rat molar enamel at the developmental stage. The experimental animals were divided into five groups and were irradiated single dose of 396cGy ; 1 st group on 14th day of gestation, 2nd group on 19th day of gestation, 3rd group on 3 days after birth, 4th group on 8 days after birth, 5th group on 28 days after birth. The control and 1, 2, 3, and 4th experimental groups were sacrificed on 2, 4, and 6 weeks and the 5th groups were sacrificed on 1 day and 2 weeks after irradiation. Distal 1/2 and occlusal 1/3 enamel surface of lingual side of lingual cusp, and fractured surface of lingual side of lingual cusp in a longitudinal direction of the mandibular first molar were examined using scanning electron microscope. The following results were obtained. 1. The roughness of enamel surface and enamel hypoplasia were increased in a sequence of 4th, 1st, 2nd, and 3rd experimental group, and the enamel cracks were increased in the 1st and 2nd experimental group. 2. The pattern of enamel hypoplasia had a network form on the 1st and 2nd experimental group, and appeared a linear shape on the 3rd experimental group, and then the crator-like enamel defects were observed in all experimental groups (especially 1st and 2nd experimental group) except 5th. 3. Dentinoenamel junction showed the clear-cut and straight appearance except 5th experimental group. 4. There was no significant difference between 5th experimental and control group.

  • PDF

천연 캐슈너트 외피유를 이용한 에폭시 수지의 가교 (Curing of Epoxy Resin with Natural Cashew Nut Shell Liquids)

  • 나창운;고진환;변준형;황병선
    • Composites Research
    • /
    • 제21권1호
    • /
    • pp.16-21
    • /
    • 2008
  • 일반적인 아미드형 가교제(HD)를 함유한 에폭시 수지의 가교거동을 캐슈너트 외피유(CNSL) 및 CNSL-포름알데하이드 수지(CFR) 그리고 피마자유 존재 하에서 시차열량계(DSC)를 이용하여 조사하였다. 가교반응에 대한 활성화 에너지를 여러 가지 가열속도에서 비등온 DSC 열량그래프로부터 계산하였다. 피마자유 존재 하에서 에폭시 수지의 가교는 1단계 반응을 나타낸 반면 CNSL 및 CFR 존재 하에서는 2단계 가교거동을 나타내었다. 즉, 에폭시 수지/CNSL(혹은 CFR)/HD 블렌드의 경우 경쟁적인 가교반응이 나타났다. HD가 없는 에폭시 수지/CNSL(혹은 CFR) 블렌드의 경우 CFR 시스템이 CNSL보다 낮은 가교엔탈피 값을 나타내었고, CNSL 및 CFR 함량이 증가할수록 가교활성화 에너지는 증가하였다.

탄소섬유/에폭시 복합재 링 시편의 노화 특성 평가 (Aging Characteristics of Carbon Fiber/Epoxy Composite Ring Specimen)

  • 윤성호;오진오
    • Composites Research
    • /
    • 제22권6호
    • /
    • pp.39-44
    • /
    • 2009
  • 가속노화장치를 이용하여 노출시간에 따른 탄소섬유/에폭시 복합재 링 시편의 노화 특성을 평가하였다. 온도, 수분, 자외선 등의 복합적인 노출조건은 최대 3000시간까지 적용하였다. 노출시간에 따른 링 시편의 인장특성과 곡률의 영향이 고려된 굽힘특성은 하중시험장치를 이용하여 평가하였으며 노화표면은 전자현미경을 통해 관찰하였다. 연구결과에 따르면 인장강성은 환경인자의 노출시간에 큰 영향을 받지 않지만 인장강도는 노출 초기에 물리시효 현상과 경화 반응으로 다소 증가하지만 노출시간이 길어지면 열화 영향으로 감소하였다. 굽힘탄성계수와 굽힘강도는 노출초기에 다소 증가하지만 노출시간이 길어지면 감소하는 양상을 나타내었다. 또한 전자현미경을 통해 관찰된 노화표면은 환경인자의 노출시간에 따라 달라지기 때문에 환경인자의 노출시간에 따른 기계적 특성의 변화를 규명하기 위한 정보를 제공해 준다.