• Title/Summary/Keyword: Scanline

Search Result 42, Processing Time 0.03 seconds

Efficient Rolling Shutter Distortion Removal using Hierarchical Block-based Motion Estimation

  • Lee, Donggeun;Choi, Kang-Sun
    • IEIE Transactions on Smart Processing and Computing
    • /
    • v.3 no.4
    • /
    • pp.205-211
    • /
    • 2014
  • This paper reports an efficient algorithm for accurate rolling shutter distortion removal. A hierarchical global motion estimation approach for a group of blocks reduces the level of computation by three orders of magnitude. In addition, the motion of each scanline is determined accurately by averaging two candidates obtained through cubic spline interpolation. The experimental results show that the proposed method produces accurate motion information with significant computation reduction and corrects the rolling shutter distortion effectively.

Experiment of 3D LOS Analysis of Gridded Terrestrial LiDAR Data (격자화된 지상라이다 자료의 3차원 가시선 분석 실험)

  • Hong, Tae-Min;Pyeon, Mu-Wook;Kang, Nam-Gi;Lee, Byoung-Kil;Kim, Chang-Jae
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.27 no.3
    • /
    • pp.357-365
    • /
    • 2009
  • RTLS(Real-Time location system) for Location tracking of personnel and equipment of a construction site is now in development, among these techniques the wireless LAN-based techniques are being considered. To introduce these techniques to the construction site, the 3-dimensional visibility analysis prior to the installation location of AP must be simulated. At this time, three-dimensional visibility analysis considering the propagation distance of RTLS signal of AP(Access Point) should be performed. In this research, two processing methods LOS boundary are tested to various grid size of gridded terrestrial LiDAR data, and the results were compared. In evaluations of visible area, the Scanline Fill-Method shows approximately 7.4% more visible area than the Shadow Clipping-Method, but the Shadow Clipping-Method shows stable results for the grid size. About the processing time, the Scanline Fill-Method is about 2 times faster compared to the Shadow Clipping-Method.

Analysis of Discontinuity Distribution Property to Predict Rock Slope Failure (암반 사면의 파괴 예측을 위한 불연속면 분포 특성 분석)

  • 윤운상;김정환;배기훈
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 1999.10a
    • /
    • pp.147-152
    • /
    • 1999
  • Distribution of fracture system is an important factor to analyse instability of jointed rock slope. In the most case of rock slopes, joint distribution properties are related to potential, shape, size and locality of slope failure. The purpose of this paper is to present an application of fracture characterization related to rock slope failure. Fracture data used in this study are collected by scanline survey. Two aspects of fracture characterization for rock slope are handled in this study First, In order to determine the potential and shape of slope failure, trace length of joints is considered as the weighting factor about collected orientation data. Second, Relationship between trace length and spacing is analysed to estimate failure location and size. The distribution of fracture system is directly influenced on wedge failure. It is effective to analyse the orientation of fractures by using weighting factors associated with the trace length of fractures rather than to analyse only that of fractures. It gives a conclusion that the wedge failure occurred along the peak of fracture density(or intensity) cycles.

  • PDF

Analysis of Problems in Road Cut-Slope Design Based on Practical Example (사례연구를 통한 도로 절개면 설계 문제점 분석과 대책안 제시)

  • 이기하;백영식;구호본;박혁진
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2000.11a
    • /
    • pp.167-174
    • /
    • 2000
  • Profiles of discontinuities through scanline method were investigated for the analysis of rock slope stability. Lower hemispheric projection method was used to evaluate the geometric stability and failure potential of these discontinuities. Also, safety factor was evaluated for the discontinuities of failure potential using by limit equilibrium analysis. Then, displacements of rock block due to the discontinuities were displayed by using the program UDEC(Universal Distinct Element Code) which applied the Distinct Element Method. When we determine the cut-slope in design, the characteristics of discontinuities is not represented only by strength parameters of intact rock. Therefore it is more reasonable method in assuring stability that first, construction would be preceded by the cut-slope of preliminary design, and then, cut-slope would be redetermined by elaborate site investigation in processing construction.

  • PDF

A Novel Image Sensing System for 3D Reconstruction (3차원 형상복원을 위한 새로운 시각장치)

  • 이두현;권인소
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.6 no.5
    • /
    • pp.383-389
    • /
    • 2000
  • This paper presents a stereo camera system that provides a Pair of stereo images using a Biprism. The equivalent of a stereo Pair of images is formed as the left and right halves of a single CCD image. The system is therefore cheap and extremely easy to calibrate since it requires only one CCD camera. An additional advantage of the geometrical set-up is that corresponding features lie on the same scanline automatically, The single camera and Biprism have led to a simple stereo system for which correspondence is very easy and which is accurate for nearby objects in a small field of view. Since we use only a single lens, calibration of the system is greatly simplified. Given the parameters in the Biprism-stereo camera system, we can reconstruct the 3-D structure using only the disparity between the corresponding points.

  • PDF

Measurement of GMAW Bead Geometry Using Biprism Stereo Vision Sensor (바이프리즘 스테레오 시각 센서를 이용한 GMA 용접 비드의 3차원 형상 측정)

  • 이지혜;이두현;유중돈
    • Journal of Welding and Joining
    • /
    • v.19 no.2
    • /
    • pp.200-207
    • /
    • 2001
  • Three-diemnsional bead profile was measured using the biprism stereo vision sensor in GMAW, which consists of an optical filter, biprism and CCD camera. Since single CCD camera is used, this system has various advantages over the conventional stereo vision system using two cameras such as finding the corresponding points along the horizontal scanline. In this wort, the biprism stereo vision sensor was designed for the GMAW, and the linear calibration method was proposed to determine the prism and camera parameters. Image processing techniques were employed to find the corresponding point along the pool boundary. The ism-intensity contour corresponding to the pool boundary was found in the pixel order and the filter-based matching algorithm was used to refine the corresponding points in the subpixel order. Predicted bead dimensions were in broad agreements with the measured results under the conditions of spray mode and humping bead.

  • PDF

Study on the Estimation of Joint Length Distribution Using Window Sampling (조사창 조사를 이용한 절리 길이분포의 추정에 관한 연구)

  • 송재준;이정인
    • Journal of the Korean Geotechnical Society
    • /
    • v.17 no.2
    • /
    • pp.21-30
    • /
    • 2001
  • 통계적 절리모델링에서 가장 불확실성이 큰 부분이 절리의 길이분포를 추정하는 것이다. 절리선 길이 분포의 추정에서 이제까지는 주로 조사선 조사(scanline survey)를 통한 절리선 반길이 분포를 이용하여 왔다. 이 연구에서는 포이송 디스크 절리모델에 대하여 보다 정밀도가 높은 절리선 길이 분포 추정방법을 찾기 위하여 조사창 조사를 이용하였다. 직사각형 및 원형 조사창에 대하여 양쪽 끝이 조사창 내부에 존재하는 절리선인 양끝내포선의 길이 분포와 한쪽 끝만이 존재하는 한끝내포선의 길이 분포를 이용, 절리선 분포를 추정하는 4개의 관계식을 각각 유도하고 컴퓨터 모의실험을 통하여 유도식의 타당성을 검증한 후 각 유도식을 이용한 절리선 분포의 추정오차를 비교하였다. 또한 절리선 분포로부터 절리직경분포를 계산하는 수치적 해를 유도하고 컴퓨터 모의시험을 통해 수치적 해에 대한 타당성을 검증하였다. 이 연구에서 제시한 조사창 조사를 이용한 절리 길이의 추정방법은 앞으로 절리모델링 분야에서 적용성이 높을 것으로 판단된다.

  • PDF

A Study for Landslides of Chungju Dam Right Abutment (충주(忠州)댐 우안(右岸) 산사태(山沙汰)에 관한 연구(硏究))

  • Choi, Young Jin;Song, Moo Young
    • Economic and Environmental Geology
    • /
    • v.24 no.3
    • /
    • pp.309-318
    • /
    • 1991
  • Analysis for landslides was studied in framework of Chungju dam right abutment, 6.5km northeast of Chungju city. $5.5{\times}10^6m^3$ landslide materials were excavated during dam construction for safety of the Chungju dam. Geology of study area is composed mainly of meta sediments such as dolomitic limestone, quartzite and schist which are dipping toward the Nam Han river. Scanline survey of discontinuities was performed for slope stability, resistivity exploration was performed for the evaluation of potential failure plane, and direct shear strength test of rocks and soils was performed for the effect on landslide. Monitoring systems of tiltmeter, tensiometer, ground water observation hole and level monument were installed during dam construction and interpreted for the evaluation of slope instability. Kinematic solution of the geological structure and evaluation using safety factor for slope may prove the failure of the slope.

  • PDF

Effective design of 2d vector graphics rasterizer for mobile device (모바일용 2D Vector Graphics에 효율적인 Rasterizer 설계)

  • Park, Jaekyu;Lee, Yeongho;Jeong, Junmo;Lee, Kwangyeob
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2009.05a
    • /
    • pp.221-224
    • /
    • 2009
  • 본 논문에서는 OpenVG Specification에서 제안한 파이프라인을 기능별, 혹은 연산별로 그룹화 하여 하드웨어 구현에 적합한 새로운 파이프라인을 제안하였다. 래스터라이저에서는 스캔라인 알고리즘과 엣지 플래그 알고리즘의 장점들을 포함하는 스캔라인 엣지 플래그 알고리즘을 구현하여 적용하였으며, Non-Zero 룰을 만족하기 위해 엣지의 방향에 따라 Winding 횟수를 기록하기 위한 추가 버퍼를 이용하였다. 또한, 래스터라이저는 안티 앨리어싱을 위해 슈퍼 샘플링 과정을 수행한다. 액티브 엣지 생성 시 클리핑을 동시에 수행하여 이후 과정에서의 불필요한 연산을 줄였고, 액티브 엣지들의 정렬을 수행하지 않는 방법을 사용하여 처리 속도를 향상 시켰다. 본 연구에서 설계된 OpenVG Rasterizer는 크로노스 그룹에서 제공하는 샘플 이미지들을 사용하여 검증하였다.

  • PDF

A Numerical Study of Hydraulic Fractures Propagation with Rock Bridges (Rock bridges를 고려한 수치 해석적 수압파쇄 균열거동 연구)

  • 최성웅
    • Proceedings of the Korean Society for Rock Mechanics Conference
    • /
    • 2000.09a
    • /
    • pp.201-210
    • /
    • 2000
  • Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mats. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributons. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks dial not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the $K_{I}$ vague increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.s.

  • PDF