• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.826-837
• /
• 2004

Rotational molding is a plastics processing technique that is ideally suited to producing relatively large, hollow, seamless parts which are partially or totally enclosed. Designers of plastic parts turn to rotational molding to produce small or large parts of unusual shape that cannot be produced as one piece by other processes, e.g., blow molding and thermoforming. In this paper, in order to enhance the quality of rotational molding plastic products, 1) surface features for the plastic products are characterized by using an image analysis system, 2) maximum tensile strength for the plastic products that are made of materials that consist of Samsung-Atofina R90lU, pigments and two different kinds of calcium carbonate (OMYA CaCO$_3$) is measured and compared with each other by using an Instron universal testing machine, 3) thickness for the plastic products is non-destructively measured to investigate the quality of the plastic products by using an A-scan ultrasonic tester.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.591-602
• /
• 2009

The Compton backscatter technique has been applied to lap-joint in aircraft structure in order to determine mass loss due to exfoliative corrosion of the aluminum alloy sheet skin. The mass loss of each layer has been estimated from Compton backscatter A-scan including the aluminum sheet, the corrosion layer, and the sealant. A Compton backscattering imaging system has been also developed to obtain a cross-sectional profile of corroded lap-splices of aging aircraft using a specially designed slit-type camera. The camera is to focus on a small scattering volume inside the material from which the backscattered photons are collected by a collimated scintillator detector for interpretation of material characteristics. The cross section of the layered structure is scanned by moving the scattering volume through the thickness direction of the specimen. The theoretical model of the Compton scattering based on Boltzmann transport theory is presented for quantitative characterization of exfoliative corrosion through deconvolution procedure using a nonlinear least-square error minimization method. It produces practical information such as location and width of planar corrosion in layered structures of aircraft, which generally cannot be detected by conventional NDE techniques such as the ultrasonic method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.231-235
• /
• 2004

High performance 42 inch XGA PDP with high luminance of 1,000 cd/$m^2$ has been developed using high efficient electrode structure, discharge gas and closed barrier ribs. For high speed addressing with single scan technique, address discharge time lag was reduced over 40% with FAST driving scheme and new materials. High dark room contrast ratio of 5,000 : 1 was achieved and picture quality was improved using new algorithm for eliminating false contour and improving gray level linearity.

• The Journal of Advanced Prosthodontics
• /
• 제8권3호
• /
• pp.219-223
• /
• 2016

PURPOSE. This study aimed to create a digitized database of fabricated obturators to be kept for patients' potential emergency needs. MATERIALS AND METHODS. A chairside intraoral scanner was used to scan the surfaces of an acrylic resin obturator. The scanned data was recorded and saved as a single standard tessellation language file using a three-dimensional modeling software. A simulated obturator model was manufactured using fused deposition modeling technique in a three-dimensional printer. RESULTS. The entire obturator was successfully scanned regardless of its structural complexity, modeled as three-dimensional data, and stored in the digital system of our clinic at a relatively small size (19.6 MB). A simulated obturator model was then accurately manufactured from these data. CONCLUSION. This study provides a proof-of-concept for the use of digital technology to create a digitized database of obturators for edentulous maxillectomy patients.

• Journal of Trauma and Injury
• /
• 제25권2호
• /
• pp.63-66
• /
• 2012

Resection of the bowel is necessary for the repair of a ventral hernia after recovery from trauma in some cases. In such instances, polyester or polypropylene meshcannot be used due to the possibility of infection; we had to use biological mesh instead. We report a case in which a traumatic hernia was repaired with Permacol (Covidien, Norwalk, CT, USA). A 42-year-old male patient had been injured by a factory machine seven months prior to admission. At that time, he had abdominal wall injury and small bowel perforation. His abdominal wall had been a defect after operation. A CT scan of the abdomen showed that the left abdominal wall, which is lateral to left rectus abdominis muscle had only one muscle layer, an external oblique muscle, and that a previous abdominal incision had a defect along the entire incision. During the exploration, 10 cm of small bowel was removed due to firm adhesion to the previous surgical scar. Permacol mesh was applied and fixed with transfascial fixations and tacks by using the intraperitoneal onlay mesh technique. There were no complications after the surgery and the patient was discharged without any problems.

• 한국음향학회지
• /
• 제13권6호
• /
• pp.45-49
• /
• 1994

본 논문에서는 출력이 2W이고 파장이 $10.6{\mu}m$인 CW $CO_{2}$ 레이저와 PZT 5A 음향변화 소자를 사용하여 광음향 영상처리 시스템을 구성하였으며 샘플로서 5mm 두께의 스텐레스강을 사용하여 그 표면에 폭과 깊이가 $50{\mu}m$, 선간격이 각각 $200{\mu}m$, $300{\mu}m$가 되도록 3선의 선형결함을 방전가공하고 $2.2mm\times2mm$의 스캔범위를 취하여 표면결함을 영상화한 결과 레이저 변조주파수가 100Hz 일때 $50{\mu}m$의 해상력을 갖는 양질의 영상을 보였다.

• 한국정보전자통신기술학회논문지
• /
• 제4권3호
• /
• pp.209-216
• /
• 2011

최근 시스템 온 칩 내 메모리의 고속 동작을 위해 TCM (Tightly Coupled Memory)를 내장한 설계가 크게 증가하고 있다. 본 논문에서는 시스템 온칩 내 eDRAM을 사용한 TCM 메모리를 위한 새로운 병열 메모리 테스트 구조를 제안한다. 제안하는 기법에서 피테스트 메모리가 테스트 모드에서 병렬 구조로 바뀌고 바운더리 스캔 체인과 함께 내장 메모리의 테스트용이도가 크게 향상된다. 병렬테스트 방식의 메모리는 각 메모리 요소들이 특정한 기능을 수행하도록 구조화되어 있으므로 모듈들로 분할하여 테스트 할 수 있으며 입출력 데이터를 기반으로 동적 테스트 평가 가능하다. 시뮬레이션을 통하여 제안한 기법의 타당성을 검증하였다.

• 한국정보통신학회논문지
• /
• 제6권3호
• /
• pp.470-474
• /
• 2002

본 논문은 CIS를 이용한 문서의 전자문서화 또는 OMR, OCR 인식에 적합한 고속 스캐너스케닝시스템 설계 및 구현에 관한 연구이며 설계기법은 CIS스케닝 센서를 고정한 상태에서 스텝모터를 이용한 기구적 조사방식을 적용하였다. 최적화 시스템을 구현하기 위해 전용의 영상처리프로세서를 사용하였다. 센서를 통해 피딩 스텝단위의 라인 당 입력된 데이터는 시스템 메모리에 저장되고 스케닝 종료위치에 이르면 페이지 당 보관된 메모리의 데이터는 USB 인터페이스 방식을 이용하여 PC로 전송하도록 설계하였다. 구현된 시스템은 소형이며 최대 A4 사이즈의 이미지 스케닝이 가능하고 이미지 스캐닝 시스템 처리속도는 초당 300mm를 유지한다 인식률은 OCR과 바 코드에서 98%이다.

• 한국정보통신학회논문지
• /
• 제15권7호
• /
• pp.1415-1422
• /
• 2011

본 논문에서는 풀 칼라 전광판에서 고효율의 해상도 표출을 위해서 듀얼 스캐닝 제어방식을 제안하고, 이를 이용해서 LED전광판의 고정된 픽셀을 영상신호에 따라 픽셀 도트 형태를 변화하게 하였다. 그리고 DICT(Dynamic Image Correction Technology) 메인 컨트롤러를 이용해서 동영상 정보를 히스토그램 균등화에 의거 영상 계조도의 값을 균일하게 분포하도록 하고, 동적 영역을 변환하여 화질을 개선하며, 입력 영상을 듀얼 오토 스캔 스위칭 컨트롤러로 전광판 내 LED Module의 픽셀을 물리적으로 제어함으로서 기존 전광판 LED 픽셀 도트의 표출 대비 4배의 고해상도 표출이 가능하도록 하는 기술을 제안하고 이를 시험제작을 통해서 그 성능을 입증하였다.

• The Korean Journal of Pain
• /
• 제11권2호
• /
• pp.326-331
• /
• 1998

Facial nerve paralysis is a common pain clinical diagnosis. But ipsilateral or contralateral recurrent facial paralysis is found in about 2.6~19.5% of facial paralysis and especially bilateral facial paralysis is rare. While idiopathic facial paralysis is the most common diagnosis, a comprehensive evaluation must be completed prior to this diagnosis in patients with bilateral facial paralysis. A representative case of bilateral alternating facial paralysis treated with stellate ganglion block (SGB) is presented. A 57 years old male patient who had the onset of a right facial paralysis 7 months ago visited pain clinic. Five months after the onset of right facial paralysis, as it was improving, he developed a left facial paralysis. He had history of hypertension, diabetus mellitus and pain episode on mastoid process before facial paralysis developed. Electrical test showed incomplete neuropathy on both side and computed tomography (CT) scan was normal. He was treated with SGB, physical theraphy and aspirin medication. After 25 times SGB, he was recovered almost completely.