• 한국정보통신학회논문지
• /
• 제19권4호
• /
• pp.895-902
• /
• 2015

본 논문은 대형 터치스크린을 위한 고속 터치감지 및 노이즈 제거를 위한 FDCS (Frequency division concurrent sensing) 기법을 제안한다. 기존의 터치스크린 감지방식은 대부분 구동신호를 순차적으로 인가하고 순차적으로 센싱신호를 분석하기 때문에 감지속도가 터치스크린 크기에 따라 급격히 감소하여 대형터치스크린에 적용하기 어려운 문제점이 있다. 제안된 기법은 모든 드라이브라인에 서로 다른 주파수의 신호를 동시에 인가하고 각 센스 라인의 신호를 주파수 영역에서 분석하는 기법으로 대형스크린에서도 고속의 감지속도를 제공한다. 또한 주파수영역에서 노이즈 필터링기법을 제안하여 터치감지신호는 누적하고 노이즈는 상쇄하며, 터치스크린의 주파수전달함수의 역의 특성을 가지는 pre-distortion equalizer를 적용하여 터치감도 SNR을 더욱 개선한다. 23" 대형 터치스크린 모델에 실제의 환경 노이즈를 적용하여 실험한 결과 본 제안기술이 기존 기법 대비 frame scan rate을 274%, SNR을 43dB 증가시킴을 보인다.

• 보건행정학회지
• /
• 제22권1호
• /
• pp.65-84
• /
• 2012

Because of the rising healthcare costs, there is a growing need for developing efficiency indicators for medical resources use and measuring efficiency of healthcare providers and healthcare systems using them. In this study, we aimed to develop efficiency indicators for medical resources use by means of Delphi technique. We systematically reviewed the existing measures of medical resource use. Thirty nine indicators were selected as a candidates across the six domains: medical personnel, medical equipment, medical facilities, ethical management, resource efficiency, and drug use. To develop efficiency indicators with professional consensus, a 2-round Delphi survey was conducted among 29 professional experts. The following indicators were selected based on the Delphi survey results: adjusted number of the patient per day and level of the nurse number medical personnel in medical personnel domain; the number of the scan a professional physician and the quality of the scan in medical equipment domain; bed utilization rate in medical facility domain; drug price reported pharmaceutical price by medical institutions, medical fee billing transparency, and medical care appropriateness in ethical management domain; costliness index in resource efficiency domain; and utilization of high cost drug and items per prescription in drug use domain. The efficiency indicators could provide valid information about efficiency of healthcare providers and healthcare systems with respect to their resources use and facilitate policies to improve their efficiency.

• 대한치과보철학회지
• /
• 제59권1호
• /
• pp.63-70
• /
• 2021

CAD-CAM 기술의 사용은 다양한 부분에서 치료의 결과를 향상시킨다. 본 증례는 법랑질형 성부전증 환자를 디지털 기술을 이용해 치료한 전악구강회복 증례이다. 임상적 검사 결과 occlusal stop의 부재로 저작기능의 저하와 치아 상실, 왜소치로 인한 치간사이 공간, 불충분한 수직피개 등의 문제점이 파악되었다. 하악의 치아 상실 부위를 수복키 위해 CAD-CAM 수술 스텐트를 이용한 임플란트 식립이 진행되었고 추가적으로 부족한 골량을 보강하기 위해 골유도재생술이 동반되었다. 상하악 자연치는 모두 전장관수복을 통해 새로운 교합평면 설정 및 안정적인 수직교합관계를 형성하였다. ARCUS digma 장비를 통한 잠정수복물 평가 후 디지털 기술을 이용하여 잠정수복물 상태의 수복물을 더블스캔을 통한 복제를 하여 최종수복물을 제작, 환자에게 수복하여 전악수복을 완성하였다. 이를 통해 치료의 효율성과 예지성 있는 결과, 환자의 적응기간 감소와 기능적, 심미적으로 높은 만족도 등을 이루어냈다.

• 대한치과보철학회지
• /
• 제60권2호
• /
• pp.195-201
• /
• 2022

편평세포암으로 하악골 절제술과 비골 피판 이식을 받은 경우 하악의 기능적 움직임이 저해될 수 있다. 하악골이 절제된 측은 근육부착의 소실로 인해 근기능이 약화되어 중심교합 및 편심교합에서 불안정한 교합접촉을 초래한다. 본 증례는 하악골절제술과 비골이식 재건술을 받은 63세 남성에서 전치부의 상실된 치아를 수복하기 위해 고정성 보철물이 필요했던 경우이다. 중심 및 편심교합에서 교합력의 크기에 따라 교합접촉 양상의 변화가 관찰되었다. Functionally generated path 기법과 디지털 영상기술을 적용하여 환자의 하악운동과 조화되고 적절한 수직고경이 있는 기능적으로 최적화된 고정성 보철물을 제작할 수 있었기에 보고하고자 한다.

• 전자공학회논문지B
• /
• 제29B권8호
• /
• pp.54-65
• /
• 1992

A huge amount of multiplications is required for 2-D filtering on the image data, making it difficult to implement a real-time quincuncial interpolator. In this paper, efficient design technique and VLSI structures for 2-D multipleierless filter are presented. In the filter design, by introducing an efficient scheme for discretizing the frequency response of the prototype filter, it is shown that a significant amount of the computational burden required in the conventional techniques, such as local search, branch and bound techniques, could be saved. In the case of 5$\times$5 filter, it is found that the design technique described in this paper could save about 80% of the computation time, compared to the conventional methods, while providing a comparable performance. For a hardware implementation, two different VLSI structures for 2-D multiplierless filter are also introduced in the paper : One is for block parallel processing and the other for scan-line parallel processing. In both structure, the AP(area-period) figure improves over Wu's structure[4].

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.61-64
• /
• 1999

In this paper, a technique to expand the Input and Output (I/O) of the programmable logic controller (PLC) using remote I/O module is presented. The controller and the remote I/O module should have the same protocol and are interfaced through RS 485. Each remote I/O module consists of 16 digital input and 16 digital output, and the maximum of 32 remote I/O module can be linked to one controller. The remote I/O is programmed for interrupt request to controller independently. Therefore, there is no affect to the scan time of the controller. Using this technique, the PLC can be efficiently applied to the several hundred meters different control points such as the ON-OFF control fur the agriculture farm, the building automation system, a multi group of machine control.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 춘계 학술대회
• /
• pp.192-200
• /
• 2005

A high speed address recovery technique for AC plasma display panel(PDP) is proposed. By removing the GND switching operation, the recovery speed can be increased and switching loss due to GND switch also becomes to be reduced. The proposed method is able to perform load-adaptive operation by controlling the voltage level of energy recovery capacitor, which prevents increasing inefficient power consumption caused by circuit loss during recovery operation. Thus, th e technique shows the minimum address power consumption according to various displayed images, different from prior methods operating in fixed mode regardless of images. Test results with 50' HD single- scan PDP(resolution : $1366{\times}768$) show that less than 350ns of recovery time is successfully accomplished and about $54\%$ of the maximum power consumption can be reduced, tracing minimum power consumption curves.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.415-416
• /
• 2006

In this paper, we proposed a new coding technique of digital hologram video using 3D scanning method and video compression technique. The proposed coding consists of capturing a digital hologram to separate into RGB color space components, localization by segmenting the fringe pattern, frequency transform using $M{\tiems}N$ (segment size) 2D DCT (2 Dimensional Discrete Cosine Transform) for extracting redundancy, 3D scan of segment to form a video sequence, motion compensated temporal filtering (MCTF) and modified video coding which uses H.264/AVC.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.244-247
• /
• 1999

This paper presents a methodology of the technique for controlling DC motor drive by implementation of 2-quadrant operating mode which can ensure the torque controlling and speed with response time less than 2 seconds at all loading conditions. By implementation of BRM technique, energy is fed with definite values of BRM 256 bits, with different patterns of high accuracy, and fixing scan time at 0.667 ms, the ripple is less than 1%, thus high efficiency can be achieved, from the consequence of the accuracy of energy feeding at low current. The stability of the whole system can be determined from circle criterion by root locus method . The instant reverse direction of rotation can be done by decreasing the energy to the lowest level while motor is running with no load and variable load at the speed about 100-120 rpm and 50-60 rpm.

• Journal of International Society for Simulation Surgery
• /
• 제1권1호
• /
• pp.7-12
• /
• 2014

Purpose Surgical correction of various occular problems which do not have visual problem in plastic surgical area is to normalize the appearance of the face by restoring the normal position of orbit and eyeball. With development of surgical technique, the orbit can be restored exactly in trauma patient and can be moved totally in hypertelorism, as an example of congenital disease. All these surgeries are based on the hypothesis that the position of oclular glove moves in the plane in a quantitatively predictable reationship to osseous orbit movement. However, no studies have critically evaluated between the change of periorbital soft tissue and the outcome of the surgical correction, because there is no method of objective, quantitave evaluation of the periorbital soft tissue. Method Author suggest the methodology for quantitative assessment of ocular and periocular fat changes using the manipulation of digital images of computed tomographic scan. Results The method was allowed to evaluate inter-dacryon distance, inter-centroid distance, movement of the medial orbital wall, movement of the lateral orbital wall, alteration of thickness of the lateral periorbital fat as indicator of movement of the orbital wall and orbit in the patient with congenital periorbital anomaly and postoperative periorbital surgery. The goal of surgical correction of various occular problems which do not have visual problem in plastic surgical area is to normalize the appearance of the face by restoring the normal position of orbit and eyeball. With development of surgical technique, the orbit can be restored exactly in trauma patient and can be moved totally in hypertelorism, as an example of congenital disease. All these sugeries are based on the hypothesis that the position of oclular glove moves in the plane in a quantitatively predictable relationship to osseous orbit movement. However, no studies have critically evaluated between the change of periorbital soft tissue and the outcome of the surgical correction, because there is no method of objective, quantitave evaluation of the periorbital soft tissue. In this report, author suggest the methodology for quantitative assessment of ocular and periocular fat changes using the manipulation of digital images of computed tomographic scan. Conclusion The method suggested is objective and accurate method in measurement of the orbital contents. It takes time and is not easy to do, however, this kind of measurement for fine structures will be more easily available in near future.