• The Korean Journal of Pain
• /
• v.11 no.2
• /
• pp.326-331
• /
• 1998

Facial nerve paralysis is a common pain clinical diagnosis. But ipsilateral or contralateral recurrent facial paralysis is found in about 2.6~19.5% of facial paralysis and especially bilateral facial paralysis is rare. While idiopathic facial paralysis is the most common diagnosis, a comprehensive evaluation must be completed prior to this diagnosis in patients with bilateral facial paralysis. A representative case of bilateral alternating facial paralysis treated with stellate ganglion block (SGB) is presented. A 57 years old male patient who had the onset of a right facial paralysis 7 months ago visited pain clinic. Five months after the onset of right facial paralysis, as it was improving, he developed a left facial paralysis. He had history of hypertension, diabetus mellitus and pain episode on mastoid process before facial paralysis developed. Electrical test showed incomplete neuropathy on both side and computed tomography (CT) scan was normal. He was treated with SGB, physical theraphy and aspirin medication. After 25 times SGB, he was recovered almost completely.

• Journal of Biomedical Engineering Research
• /
• v.28 no.4
• /
• pp.461-470
• /
• 2007

Human can learn how to shape their brain electrical activity in a desired direction through continuous feedback of the electroencephalogram (EEG), and this technique is known as Neurofeedback (or EEG biofeedback), which has been used since the late 1960s in clinical applications. In this study, a portable wireless EEG (named wEEG) has been designed and implemented, which consists of a mobile station (a wireless two-channel EEG acquisition device) and a base station (a bridge between mobile station and computer). Moreover, a SensoriMotor Rhythm (SMR) training system was also implemented with the wEEG for enhancing attention with virtual environment. Experiment results based on 16 volunteers' (8 females and 8 males, average age is $27{\pm}4$) were reported in this paper. The results show that the SMR ratio of 87.5% subjects increased about 0.7% in training status than that in the stable status. With the proposed system, many training protocol scan be designed easily and can be done at home in our daily life conveniently. Additionally, the proposed system will be useful for disabled and aged people.

• Journal of Korean Neurosurgical Society
• /
• v.45 no.3
• /
• pp.192-195
• /
• 2009

We present a case of an acute psoas muscle hematoma following percutaneous endoscopic lumbar discectomy. A 60-year-old female who presented with far lateral lumbar disc herniation underwent endoscopic discectomy on the right side at the L4-5 level. On the second postoperative day, the patient complained of severe right flank and leg pain and her blood pressure decreased. A computed tomography scan showed a large acute psoas muscle hematoma at right L4-5 level. The patient was transfused with packed red blood cells and placed at absolute bed rest. After observing the patient in intensive care, the severe flank and leg pain subsided, but the mild back pain persisted. Although percutaneous endoscopic lumbar discectomy is an effective minimally invasive surgical technique for the treatment of lumbar disc herniation, this case highlights the inherent risks of acute lumbar segmental vessel injury.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.3
• /
• pp.173-179
• /
• 1999

In reverse engineering, when a shape containing multi-patched surfaces is digitized, the boundaries of these surfaces should be detected. The objective of this paper is to introduce a computationally efficient segmentation technique for extracting edges, ad partitioning the 3D measuring point data based on the location of the boundaries. The procedure begins with the identification of the edge points. An automatic edge-based approach is developed on the basis of local geometry. A parametric quadric surface approximation method is used to estimate the local surface curvature properties. the least-square approximation scheme minimizes the sum of the squares of the actual euclidean distance between the neighborhood data points and the parametric quadric surface. The surface curvatures and the principal directions are computed from the locally approximated surfaces. Edge points are identified as the curvature extremes, and zero-crossing, which are found from the estimated surface curvatures. After edge points are identified, edge-neighborhood chain-coding algorithm is used for forming boundary curves. The original point set is then broke down into subsets, which meet along the boundaries, by scan line algorithm. All point data are applied to each boundary loops to partition the points to different regions. Experimental results are presented to verify the developed method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.419-425
• /
• 2017

This paper presents CMOS UWB RFIC based radar system for high speed target detection. The system can achieve resolution of 15 cm and detection range of 15 m. For developed system, single chip CMOS UWB IC is implemented. To reduce the measuring and processing time, envelope detection and equivalent time sampling technique are used. Measurement results show that the bandwidth and center frequency of UWB pulse can be adjusted in the range of 0.5 GHz~1.0 GHz, 3.5 GHz~4.5 GHz, respectively. Signal processing time including scan time over 15 m distance is about $150{\mu}sec$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.8
• /
• pp.18-24
• /
• 2011

A new problem happens with the evolution of TSV based 3D IC design. The bonding process takes place which follows with the testing of design for proper connectivity in the absence of TSV redundancy. In order to achieve good yield, the design should be tested with redundancy TSV. This paper presents a wrapper cell design for redundancy TSV interconnect test. The design for test technique, in terms of hardware and software perspectives is described. The wrapper cell with hardware design can use original test patterns. However, software design has less area overhead.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.9
• /
• pp.991-999
• /
• 2013

Lower limbs deformity is a congenital disease and can also be occurred by an acquired factor. This paper suggests a new technique for surgical planning of Corrective Osteotomy for Lower Limbs (COLL) using 2D-3D medical image registration. Converting to a 3D modeling data of lower limb based on CT (computed tomography) scan, and divide it into femur, tibia and fibula; which composing the lower limb. By rearranging the model based on the biplane 2D images of X-ray data, a 3D upright bone structure was acquired. There are two ways to array the 3D data on the 2D image: Intensity-based registration and feature-based registration. Even though registering Intensity-based method takes more time, this method will provide more precise results, and will improve the accuracy of surgical planning.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.278-280
• /
• 1999

This paper proposes controlling of temperature in an oven by using 4 bits Integral - Cycle Binary Rate Modulation (IBRM) method and ac line with frequency 50 Hz. Microcontroller MCS-51 controls IBRM according to Proportional Integral controller (PI) function. Discrete signals are used in the system modeled by using Ziegler Nichols principle for analyzing the stability before designing the system. This procedure makes it easy to investigate system response. The system is implemented by 4 bits digital circuit which gives 320 patterns of ac signal fur controlling the generation of energy for 3,000 watts thermal coil every 20 ms of each cycle. We divide scan time (Ts$\sub$n/) in to 20 intervals, 1 ms interval is selected to generate 16 patterns IBRM. Because of this method gives the ripple lower than 2% it generates less noise fur system. Moreover, we can consider whole system from the time model of control procedure and IBRM algorithm at 40-200$^{\circ}C$ with ${\pm}$ 1$^{\circ}C$ error in the 1 cubic meter oven.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.74-74
• /
• 1999

TEM(투과전자현미경, Transmission Electron Microscop)은 결정재료뿐 아니라 비정질 재료까지도 원자단위의 구조를 연구하는데 매우 유용한 도구이다. 특히 200kV의 가속전압 투과전자현미경에 FEG(Field Emission Gun) 전자총이 장착되기 시작하면서 TEM은 비정질 구조 연구에 하나의 핵심적인 도구로서의 역할이 크게 기대되는 장비가 되었다. 본 연구에서는 TEM의 microanalysis accessary인 EELS(Electron Energy Loss Spectroscopy)technique을 주로 이용하던 기존의 방법대신 고 분해능(HRTEM(High Resolution Transmission Electron Microscopy)의 image로부터 비정질 정량묘사의 유일한 도구인 원자분포함수(RDF(Radial Distribution Function))로의 Reconstruction을 Simulation을 이용하여 시도하였다. 비정질 HRTEM image의 정량분석을 통하여 이 분야에서의 TEM의 한계를 이해하기 위하여 몇 모델을 제시하고 사용하였다. 또한 비정질 구조를 정량적으로 묘사하는 도구인 원자분포함수를 알아보고 비정질재료를 보다 물리적으로 모델링하기 위하여 가능한 모델 제시 후 첫 단계로서 HRTEM image에서 원자분포함수를 이끌어내기 위한 모델링을 수행하고 비정질 게르마늄(a-Ge) film에 대하여 실제로 적용하여 보았다. 마지막으로 실험적인 접근으로 200kV FE-TEm (poingt resolution 0.14nm) 으로 비정질 Ge의 image를 solw Scan CCD를 이용한 Elastic image를 Through Focus로 얻었으며 수치적인 정량비교를 역격자 공간에서 출발한 가장 물리적인 구조 모델을 이용하여 수행하였다. 모든 정량비교는 image의 Fourier 변환인 Diffractogram으로 하였다. 결론적으로, 많은 복잡한 수치 처리과정을 거쳐야 하지만 HRTEM의 image로부터 구조에 대한 정보(RDF)는 명확하게 얻을 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.10
• /
• pp.746-753
• /
• 2001

GenBIST implemented in this paper is an automatic CAD tool, which can automatically generate circuitry in VerilogHDL code based on user defined information for the memory testing. While most commercial and conventional CAD tools adopt a method in which they make memory-testing algorithms as a library to generate circuitry, our tool can generate circuitry according to the user-defined algorithm, which makes application of various algorithms easier. In addition, memory BIST circuitry can be shared with other memories by supporting embedded memories in our tool. Also, extra pins for the memory testing are not requited when boundary scan technique is combined.