• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.7
• /
• pp.602-609
• /
• 2008

This paper presents experimental optimization of process parameters for a newly developed SFF(Solid Freeform Fabrication) system. Two critical process parameters, layering thickness and curing period, which have a large effect on the quality of the product, are optimized through experiments. Specimens are produced using layering thicknesses of 60, 80, 100, 120, 140, and $160\;{\mu}m$ and curing periods of 0, 10, 20, and 30 minutes under the same processing conditions, i.e., build-room temperature, feed-room temperature, roller speed, laser power, scan speed, and scan spacing. The specimens are tested to compare and analyze performance indices such as thickness accuracy, flatness, stress-strain characteristics, and porosity. The experimental result indicates that layering thickness of $80{\sim}100\;{\mu}m$ and curing period of $20{\sim}30$ minutes are recommended for the developed industrial SFF system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.199-202
• /
• 2002

In general, the background light produced during the reset period deteriorates the dark room contrast ratio in AC PDP. In this paper, we propose a modified ramp reset pulse that can reduce the background light to imperceptible level. In the new reset waveform, the discharges between the scan and sustain electrodes are minimized by applying a positive bias voltage to the sustain electrode and only the weak discharges between the scan and address electrodes occur during the reset period. We adopted a MgO coated phosphor layer to get the same level of voltage margin in the new reset pulse scheme compared to that of the conventional ramp reset pulse one. As a result, the voltage margin is maintained at the same level and the dark room contrast ratio is improved dramatically.

• Korean Journal of Remote Sensing
• /
• v.38 no.3
• /
• pp.251-263
• /
• 2022

This paper presents an idea of ScanSAR image formation. For image formation of ScanSAR that utilizes the burst mode for raw signal acquisition, most conventional single burst methods essentially require a step of azimuth stitching which contributes to radiometric and phase distortions to some extent. Time-domain cross correlation could replace SPECAN which is most popularly used for ScanSAR processing. The core idea of the proposed method is that it is possible to relieve the necessity of azimuth stitching by an extension of Doppler bandwidth of the reference function to the burst cycle period. Performance of the proposed method was evaluated by applying it to the raw signals acquired by a spaceborne SAR system, and results satisfied all image quality requirements including 3 dB width, peak-to-sidelobe ratio (PSLR), compression ratio,speckle noise, etc. Image quality of ScanSAR is inferior to that of Stripmap in all aspects. However, it is also possible to improve the quality of ScanSAR image competitive to that of Stripmap if focused on a certain parameter while reduced qualities of other parameters. Thus, it is necessary for a ScanSAR processor to offer a great degree of flexibility complying with different requirements for different applications and techniques.

• The Korean Journal of Nuclear Medicine
• /
• v.30 no.1
• /
• pp.1-14
• /
• 1996

Since the publication of the first bone scintiscans in 1962 three decades have elapsed. The bone scan has made great strides during this period, becoming one of the most commonly used nuclear imaging tests. In spite of the progress, however, the specificity of bone scan has remained relatively low. As the result it is a common practice to seek additional information from radiograph, CT scan and MR image, which is euphemistically termed as "image fusion or co-location." The basic reason is the inapplicability of the classical piecemeal analysis to interpreting planar and SPECT bone scans. Such analysis has its base on the observation of elemental features of morphology, which include the size, shape, contour, location, topography and internal architecture. The physiochemical profile may well also be included. Understandably, however, the miniatured images of the planar bone scan cannot provide these features in acceptable detail and the same holds true even with SPECT Images which are but sliced views of the reconstructed planar scans. Fortunately pinhole scanning has the capacity to portray both the morphological and chemical profiles of bone and joint diseases in greater detail through true magnification. The magnitude of pinhole scan resolution is practically comparable to that of radiography as far as gross anatomy is concerned. Thus, we feel strongly that pinhole scanning is a potential breakthrough of the long-lamented low specificity of bone scan. This presentation will discuss the fun-damentals, advantages and disadvantages and the most recent advances of pinhole scanning. It high-lights the actual clinical applications of pinhole scanning in relation to the diagnosis of infective and inflammatory diseases of bone and joint.

• The Korean Journal of Nuclear Medicine
• /
• v.22 no.1
• /
• pp.59-64
• /
• 1988

Because carcinoma of breast is known to readily metastasize to the bone, early detection of metastasis spread is very important. Two hundred thirty four consecutive patients who had $^{99m}Tc-MDP$ bone scans prior to treatment and during the follow up period were studied retrospectively to determine the contribution of the scans to staging, treatment and follow up examination between Jan. 1980 and Apr. 1987 in Seoul National University Hospital. 1) Positive bone scan rates in initial clinical stage I, II, III and IV were 0%, 4%, 14% and 53%, respectively. 2) The higher clinical stage is, the more cumulative risk of conversion to positive bone scan is during the same follow up period. 3) Conversion rate to positive bone scan in patients with lymph node metastasis is higher (50%) than those without metastasis (18%) (P < 0.001). We concluded that the bone scan in primary breast cancer was very useful to evaluate initial clinical stage and to perform the follow up examination.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.5
• /
• pp.239-244
• /
• 2006

To drive the high-image quality plasma displays of XGA and/or full-HD, we must effectively improve the driving waveform, which get the reset period for the stabilized control of wall charges, the address period to select discharge or non-discharge, and sustain period for luminance in 1 TV-frame, and also the display quality. To accomplish them, the development of the technology for the fast address discharge is required. In this paper, the correlation between the sustain-electrode gap and address discharge characteristics for the high-speed addressing was analyzed using the measurements of dynamic voltage margins. Results showed that the narrower the gap between the sustain electrodes, the narrower the with of the scan pulse became and a dynamic margin of data voltage of 29.2 V was obtained at scan pulse width of $1.0{\mu}s\;and\;V_{ramp}$ of 240 V for driving 4-inch test penal, which the gap between sustain electrodes was $65{\mu}m$.

• Journal of Oral Medicine and Pain
• /
• v.30 no.1
• /
• pp.57-67
• /
• 2005

The aim of this study was to evaluate bone scan(SUR) and SPECT(hot spot) in patients with TMJ osteoarthritis. 99mTc-MDP bone scan and SPECT were done in 27 patients, total 54 temporomandibular joints were examined with clinical examination, plain radiography. 42 TMJs were osteoarthritis and 12 TMJs were normal case, clinically diagnosed. We compared osteoarthritis group and control group of bone scan(SUR) and SPECT(hot spot). thus we compared before and after treatment of bone scan(SUR) and bone SPECT(hot spot) according to history, contributing factor, symptom degree, treatment, treatment period. The obtained results were as follows. 1. Bone scan(SUR) and SPECT(hot spot) activity of osteoarthritis group were higher than control group(P<0.05, P<0.01). 2. Bone scan(SUR) and SPECT(hot spot) activity were decreased after treatment at TMJ with osteoarthritis(P<0.01). 3. Bone scan(SUR) and SPECT(hot spot) activity were decreased at treatment group with splint(P<0.01, P<0.05). 4. Bone scan(SUR) and SPECT(hot spot) activity were decreased at Chronic group(P<0.01, P<0.05). 5. Bone scan(SUR) and SPECT(hot spot) activity were decreased at low noise NAS(<6) group(P<0.01,P<0.05). 6. Bone scan(SUR) and SPECT(hot spot) activity were decreased at TMD patient with parafunctional habit and without trauma history, psychosocial factor. 7. Bone scan(SUR) and SPECT(hot spot) activity were higher at before treatment required more treatment period.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.11
• /
• pp.1153-1163
• /
• 2014

An efficient 3D SLAM (Simultaneous Localization and Map Building) method is developed for urban building environments using a tilted 2D LRF (Laser Range Finder), in which a 3D map is composed of perpendicular/horizontal planar polygons. While the mobile robot is moving, from the LRF scan distance data in each scan period, line segments on the scan plane are successively extracted. We propose an "expected line segment" concept for matching: to add each of these scan line segments to the most suitable line segment group for each perpendicular/horizontal planar polygon in the 3D map. After performing 2D localization to determine the pose of the mobile robot, we construct updated perpendicular/horizontal infinite planes and then determine their boundaries to obtain the perpendicular/horizontal planar polygons which constitute our 3D map. Finally, the proposed SLAM algorithm is validated via extensive simulations and experiments.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.1
• /
• pp.45-47
• /
• 2011

Abnormal contrast enhancement on brain computed tomography (CT) scan after diagnostic or interventional angiography is not rare, and has known to be induced by temporary blood-brain barrier (BBB) disruption from contrast media. Furthermore, it has been regarded as clinically subtle, but reported to have no symptom or mild transient symptoms. However, we recently experienced two cases of serious BBB disruption during the acute period after coiling of an unruptured intracranial aneurysm. One patient presented with an unruptured paraclinoid internal carotid artery (ICA) aneurysm on the right and the other with an unruptured right supraclinoid ICA aneurysm. Both patients showed similar findings on immediate postembolization CT scan and clinical courses after coiling. Typical radiological, clinical characteristics of BBB disruption were described. In addition, the role of immediate postembolization CT scan are also discussed.

• Journal of Pharmacopuncture
• /
• v.13 no.2
• /
• pp.111-120
• /
• 2010

Objective: This study is to evaluate the effectiveness of the oriental medicine treatment on lumbar disc herniation. Subjects and Methods : The clinical analysis was done on 32 cases of patients with lumbar disc herniation diagnosed by lumbar CT scan. Patients who admitted In Cheongju Oriental Medicine Hospital from April 2007 to April 2008 were analyzed according to the distribution of sex, age, the period of disease, condition on admission, the symptom on admission, Admission day, the treatment efficacy at discharge day. Results : 1. The forties was the most, the acutest phase the most, the day of 8-14 days the most. 2. Multiple bulging disc in 37.5% of CT scan was the most common, followed by a single HNP was 28.1%. 3. Almost 81 % patients showed effective efficacy under VAS 3 at discharge day. 4. Single bulging and herniated disc were more short admission days than multiple bulging and herniated disc.