• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.712-716
• /
• 2010

Purpose: Extensive lumbosacral defects after removal of spinal tumors have a high risk of wound healing problems. Therefore it is an effective reconstructive strategy to provide preemptive soft tissue coverage at the time of initial spinal surgery, especially when there is an instrument exposure. For soft tissue reconstruction of a lumbosacral defect, a variation of the gluteal flap is the first-line choice. However, the musculocutaneous flap or muscle flap that is conventionally used, has many disadvantages. It damages gluteus muscle and causes functional disturbance in ambulation, has a short pedicle which limits areas of coverage, and can damage perforators, limiting further surgery that is usually necessary in spinal tumor patients. In this article, we present the superior gluteal artery perforator turn-over flap that reconstructs complex lumbosacral defects successfully, especially one that has instrument exposure, without damaging the ambulatory function of the patient. Methods: A 67 year old man presented with sacral sarcoma. Sacralectomy with L5 corpectomy was performed and resulted in a $15{\times}8\;cm$ sized complex soft tissue defect in the lumbosacral area. There was no defect in the skin. Sacral stabilization with alloplastic fibular bone graft and reconstruction plate was done and the instruments were exposed through the wound. A $18{\times}8\;cm$ sized superior gluteal artery perforator flap was designed based on the superior gluteal artery perforator and deepithelized. It was turned over 180 degrees into the lumbosacral dead space. Soft tissue from both sides of the wound was approximated over the flap and this provided in double padding over the instrument. Results: No complications such as hematoma, flap necrosis, or infection occurred. Until three months after the resection, functional disturbances in walking were not observed. The postoperative magnetic resonance imaging scan shows the flap volume was well maintained over the instrument. Conclusion: This superior gluteal artery perforator turn-over flap, a modification of the conventional superior gluteal artery perforator flap, is a simple method that enabled the successful reconstruction of a lumbosacral defect with instrument exposure without affecting ambulatory function.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.9
• /
• pp.1184-1191
• /
• 2011

We attempted to generate a linkage map using Illumina Porcine 60K SNP Beadchip genotypes of the $F_2$ offspring from Korean native pig (KNP) crossed with Yorkshire (YS) pig, and to identify quantitative trait loci (QTL) using the line-cross model. Among the genotype information of the 62,136 SNPs obtained from the high-density SNP analysis, 45,308 SNPs were used to select informative markers with allelic frequencies >0.7 between the KNP (n = 16) and YS (n = 8) F0 animals. Of the selected SNP markers, a final set of 500 SNPs with polymorphic information contents (PIC) values of >0.300 in the $F_2$ groups (n = 252) was used for detection of thirty meat quality-related QTL on chromosomes at the 5% significance level and 10 QTL at the 1% significance level. The QTL for crude protein were detected on SSC2, SSC3, SSC6, SSC9 and SSC12; for intramuscular fat and marbling on SSC2, SSC8, SSC12, SSC14 and SSC18; meat color measurements on SSC1, SSC3, SSC4, SSC5, SSC6, SSC10, SSC11, SSC12, SSC16 and SSC18; water content related measurements in pork were detected on SSC4, SSC6, SSC7, SSC10, SSC12 and SSC14. Additional QTL of pork quality traits such as texture, tenderness and pH were detected on SSC6, SSC12, SSC13 and SSC16. The most important chromosomal region of superior pork quality in KNP compared to YS was identified on SSC12. Our results demonstrated that a QTL linkage map of the $F_2$ design in the pig breed can be generated with a selected data set of high density SNP genotypes. The QTL regions detected in this study will provide useful information for identifying genetic factors related to better pork quality in KNP.

• Journal of Biomedical Engineering Research
• /
• v.24 no.3
• /
• pp.217-231
• /
• 2003

Coded excitation with complementary Golay sequences is an effective means to increase the SNR and penetration of ultrasound imaging. in which the two complementary binary codes are transmitted successively along each scan-line, reducing the imaging frame rate by half. This method suffers from low frame rate particularly when multiple transmit focusing is employed, since the frame rate will be further reduced in proportion to the number of focal zones. In this paper. a new ultrasound imaging technique based on simultaneous multiple transmit focusing using modified orthogonal Golay codes is proposed to improve lateral resolution with no accompanying decrease in the imaging frame rate, in which a pair of orthogonal Golay codes focused at two different focal depths are transmitted simultaneously. On receive, these modified orthogonal Golay codes are separately compressed into two short pulses and individually focused. These two focused beams are combined to form a frame of image with improved lateral resolution. The Golay codes were modified to improve the transmit power efficiency (TPE) for practical imaging. Computer simulations and experimental results show that the proposed method improves significantly the lateral resolution and penetration of ultrasound imaging compared with the conventional method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.4
• /
• pp.93-101
• /
• 2004

A face boundary can be approximated by an ellipse with five-dimensional parameters. This property allows an ellipse detection algorithm to be adapted to detecting faces. However, the construction of a huge five-dimensional parameter space for a Hough transform is quite unpractical. Accordingly, we Propose a selectively attentional Hough transform method for detecting faces from a symmetric contour in an image. The idea is based on the use of a constant aspect ratio for a face, gradient information, and scan-line-based orientation decomposition, thereby allowing a 5-dimensional problem to be decomposed into a two-dimensional one to compute a center with a specific orientation and an one-dimensional one to estimate a short axis. In addition, a two-point selection constraint using geometric and gradient information is also employed to increase the speed and cope with a cluttered background. After detecting candidate face regions using the proposed Hough transform, a multi-layer perceptron verifier is adopted to reject false positives. The proposed method was found to be relatively fast and promising.

• Journal of Acupuncture Research
• /
• v.21 no.5
• /
• pp.179-190
• /
• 2004

Objectives : The purpose of this study was to investigate the effect of Bee Venom and Melittin acupuncture solution on the lipopolysaccharide and sodium nitroprusside- induced expression of cytosolic phospholipase $A_2$, tumor necrosis factor-${\alpha}$ and calcium concentration in RAW 264.7 cells, a murine macrophage cell line. Methods : The expression of cytosolic phospholipase $A_2$ and tumor necrosis factor-${\alpha}$ was determined by western blotting with corresponding antibodies, and the generation of intracellular calcium concentration was investigated by delta scan system in RAW 264.7 cells. Results : 1. Compared with control, expressions of lipopolysaccharide-induced cytosolic phospholipase $A_2$ were decreased significantly by $5{\mu}g/mL$ of bee venom and 5, $10{\mu}g/mL$ of melittin acupuncture solution and decreased by 0.5, $1{\mu}g/mL$ of bee venom. 2. Compared with control, expressions of sodium nitroprusside-induced phospholipase $A_2$ were decreased significantly by 0.5, 1, $5{\mu}g/mL$ of bee venom and by 5, $10{\mu}g/mL$ of melittin acupuncture solution. 3. Compared with control, expressions of lipopolysaccharide-induced tumor necrosis factor-${\alpha}$ were decreased significantly by $10{\mu}g/mL$ of melittin acupuncture solution and were not changed significantly by 0.5, 1, $5{\mu}g/mL$ of bee venom and $5{\mu}g/mL$ of melittin acupuncture solution. 4. Compared with control, expressions of sodium nitroprusside-induced tumor necrosis factor-${\alpha}$ were decreased significantly by 1, $5{\mu}g/mL$ of bee venom and 5, $10{\mu}g/mL$ of melittin acupuncture solution and decreased by $0.5{\mu}g/mL$ of bee venom 5. Compared with control, lipopolysaccharide-induced intracellular calcium concentrations were decreased by 0.5, 1, $5{\mu}g/mL$ of bee venom and $10{\mu}g/mL$ of melittin acupuncture solution and increased by $5{\mu}g/mL$ of melittin acupuncture solution. 6. Compared with control, sodium nitroprusside-induced intracellular calcium concentrations were decreased by 0.5, 1, $5{\mu}g/mL$ of bee venom and 5, $10{\mu}g/mL$ of melittin acupuncture solution.

• Tuberculosis and Respiratory Diseases
• /
• v.65 no.2
• /
• pp.142-146
• /
• 2008

Small cell lung cancer is characterized by an aggressive clinical course and a high tendency for early dissemination in spite of a good chemotherapy response. Topotecan is a topoisomerase I inhibitor, and it is used as second-line treatment for small cell lung cancer. The reported dose-limiting adverse reactions to topotecan are mainly hematologic. Yet pulmonary toxicity associated with topotecan is known to be rare. We report here on a case that showed the development of acute respiratory distress syndrome during the 3rd cycle of topotecan chemotherapy in a patient with small cell lung cancer. He developed dyspnea and respiratory failure, and the chest CT scan revealed diffuse ground-glass opacity that was probably due to chemotherapy-related pulmonary toxicity. He finally died of acute respiratory distress syndrome.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.73-77
• /
• 2010

Purpose: The nuclear medicine technology has been changed. The hard ware is developed so much. Also the soft ware performs a meritorious deed for the development of nuclear medicine technology. We could use the automated region of interest (ROI) instead of manual ROI. We want to know that what difference of quantitative analysis is there between automated ROI and manual ROI Materials and Methods: There are three experimental to make results. The first is what comparing the renal automated ROI and manual ROI. The second is that we compared three threshold ROI that size is difference each others with visible decision. The third is that we compared full, half, quarter automated background, and survey relative function. Results: Although the first has statistically not significant difference, the second and third have significant difference. Threshold, setting smaller threshold then renal outline or bigger, has statistically significant difference (p<0.01). The third is performed with the first experimental. Full background has significant difference, comparing each three type background (p<0.05). Conclusion: The results that there is not significant difference between automated ROI and manual ROI will increase objectivity and operator's convenience. We could know that smaller threshold then renal out line has significant difference in the second experimental. And the third experimental has results because of a increased background nearby live and spleen.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3437-3445
• /
• 2016

Background: There is an increasing concern in the role of microRNA (miRNA) in the pathogenesis of bone metastasis (BM) secondary to prostate cancer (CaP). In this exploratory study, we hypothesized that the expression of vinculin (VCL) and chemokine X3C ligand 1 (CX3CL1) might be down-regulated in clinical samples, most likely due to the post-transcriptional modification by microRNAs. Targeted genes would be up-regulated upon transfection of the bone metastatic prostate cancer cell line, PC3, with specific microRNA inhibitors. Materials and Methods: MicroRNA software predicted that miR-21 targets VCL while miR-29a targets CX3CL1. Twenty benign prostatic hyperplasia (BPH) and 16 high grade CaP formalin-fixed paraffin embedded (FFPE) specimens were analysed. From the bone scan results, high grade CaP samples were further classified into CaP with no BM and CaP with BM. Transient transfection with respective microRNA inhibitors was done in both RWPE-1 (normal) and PC3 cell lines. QPCR was performed in all FFPE samples and transfected cell lines to measure VCL and CX3CL1 levels. Results: QPCR confirmed that VCL messenger RNA (mRNA) was significantly down-regulated while CX3CL1 was up-regulated in all FFPE specimens. Transient transfection with microRNA inhibitors in PC3 cells followed by qPCR of the targeted genes showed that VCL mRNA was significantly upregulated while CX3CL1 mRNA was significantly down-regulated compared to the RWPE-1 case. Conclusions: The down-regulation of VCL in FFPE specimens is most likely regulated by miR-21 based on the in vitro evidence but the exact mechanism of how miR-21 can regulate VCL is unclear. Up-regulated in CaP, CX3CL1 was found not regulated by miR-29a. More microRNA screening is required to understand the regulation of this chemokine in CaP with bone metastasis. Understanding miRNA-mRNA interactions may provide additional knowledge for individualized study of cancers.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.35-39
• /
• 2003

The display technology on the retina is the key role in inspecting the condition of the patients. 2-dimensional retina image is widely used in the eye examination as of today. Recently, 3-dimensional retina image ones have been introduced to this area, but the quality of the image is not fully satisfied to the operator. For the purpose of developing 3-D retina imaging instrument, the optimization of a 3-D retina imaging system using Code-V tool was investigated in this thesis. He-Ne laser having the wavelength 632.8 nm was used to make a power source to detect the retina. Several lenses and mirrors installed on sledge which were developed to perform focus control on 3-D device were designed to make a beam focusing and direct line. Polygon scanner having 24 mirror facets and galvanometer making tilting movement were utilized to make a 2-D laser plane. Also, design of eye ball had been fulfilled to see the focus of the 2-D plane. Reflected ray from retina detected on the sensor array with the same path. All cognitive components were optimized for aberration correction in order to focus on retina. Results of optimization were compared to those of initial designed optics system. On the basis of above results, the result of third aberration has been corrected to stable values to the optical system. MTF evaluating the resolution of an image has been closely correlated to the diffraction limit and PSF indicating the strength distribution of an image has shown the SR value as 0.9998 having high performance. The possibility of new and powerful 3-D retina image instrument was verified by simulating each component of the instrument by Code-V.

• The Journal of the Korea Contents Association
• /
• v.16 no.7
• /
• pp.689-699
• /
• 2016

As the demand for LCD increases, the importance of inspection equipment for improving the efficiency of LCD production is continuously emphasized. The pattern inspection apparatus is one that detects minute defects of pattern quickly using optical equipment such as line scan camera. This pattern inspection apparatus makes a decision on whether a pixel is a defect or not using a single threshold value in order to meet constraint of real time inspection. However, a method that uses an adaptive thresholding scheme with different threshold values according to characteristics of each region in a pattern can greatly improve the performance of defect detection. To apply this adaptive thresholding scheme it has to be known that a certain pixel to be inspected belongs to which region. Therefore, this paper proposes a region matching algorithm that recognizes the region of each pixel to be inspected. The proposed algorithm is based on the pattern matching scheme with the consideration of real time constraint of machine vision and implemented through GPGPU in order to be applied to a practical system. Simulation results show that the proposed method not only satisfies the requirement for processing time of practical system but also improves the performance of defect detection.