• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.335-338
• /
• 1998

This paper presents calculated results for the infinite phased arrays of the probe-fed rectagualr microstrip patches. A numerical model that is based on a rigorous Green's function and galerkin solutionsis is described. In an arbitrary scan plane, the input impedance and the input reflection coefficient versus the scand angle are calculated. The effects of substrate parameters on the phased arry antenna are considered. The scan blindness phenomenon due to the surface wave is observed and the input impedance bandwidth in the arbitrary scan plane is calculated.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.347-352
• /
• 2005

Scan Element Pattern(SEP) and Scan Impedance(SI) concepts are used to analyze the characteristics of open-ended waveguide array, which is the representative phased array antenna element in C-band and X-band. Transmit SEP's are calculated for 15$\sim$15 subarray and SI's are obtained by applying periodic boundary conditions for a unit cell of the given array condition. CST's MWS and Ansoft's HFSS are utilized for each analysis. Some relations are reviewed between the two results, which are based on mutual coupling effects. For validation purpose, an 8$\sim$8 subarray is constructed and tested. Transmit SEP measured in MTG's far-field range shows good agreement with the calculated transmit SEP.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.7-14
• /
• 2007

In this paper, the scan characteristics of phased array antenna consisted of rectangular open-ended waveguide with a triangular grid are investigated. An infinite array structure is analyzed by numerically solving the integral equation for the electric field over the waveguide aperture using waveguide mode function and Floquet mode function. Next, SEP(Scan Element Pattern) and SI(Scan Impedance) characteristics are simulated by CST's MWS(Microwave Studio) and Ansoft's HFSS(High Frequency Structure Simulator) for the finite and infinite array structures. Also, validity of these approaches is verified by comparing the calculated and simulated results with the measured ones for an $8{\times}8$ subarray. Within 10.5 % fractional bandwidth in the X-band, the fabricated subarray showed the flat gain characteristic in the scan range of ${\pm}45^{\circ}C$ in the E-plane(azimuth) and ${\pm}20^{\circ}C$ in the H-plane(elevation), and also showed the return loss characteristic of less than -10 dB.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.2
• /
• pp.67-74
• /
• 1994

Effects of the GaAs semiconductor particles on electrophysical phenomena at the Pt electrode/10S0-3TM KCl aqueous electrolyte interfaces have been studied using voltammetric time based and electrochemical impedance techniques. The anodic decomposition effect f the GaAs semiconductor particles on electrophysical phenomena was significantly observed during the positive potential scan (0 to 1.0 V vs. SCE). On the other hand, the cathodic decomposition effect of the GaAs semiconductor particles was negligible during thenegative potential scan (0 to -1.0 V vs. SCE). The GaAs semiconductor particles act as current activators or mediators during the anodic process and act as charge screens during the cathodic process. The electrolyte resistance and related impedance was increased due to the presence of the GaAs semiconductor particles. The anodic decomposition effect of the GaAs semiconductor particles can directly be applied to activate the hydrogen evolution.

• The Journal of the Korea Contents Association
• /
• v.17 no.10
• /
• pp.94-101
• /
• 2017

This study is to compare and analyze the bioelectrical impedance values on the upper extremity (affected and non-affected side) in hemiplegic stroke patients. Experimental subjects were 24 stroke patients with hemiplegia undergoing stroke rehabilitation between October to November, 2015. Prediction marker, resistance, reactance, and phase angle were measured in the upper extremity (affected and non-affected side) of hemiplegic stroke patients, using MultiScan 5000, and then they were expressed as quantified values. The affected and non-affected side of upper extremity in stroke patients with hemiplegia exhibited significant differences in prediction marker, reactance, and phase angle (p<0.05). There were significant differences in the impedance values at the affected and non-affected side of hemiplegic stroke patients. Thus, the possibility of evaluating stroke patients undergoing clinical rehabilitation therapy was suggested.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.2
• /
• pp.63-67
• /
• 2011

To examine the effects of a two-cation ionic liquid as an electrolyte component of a supercapacitor, 1,4-bis(3-methylimidazolium-1-yl)butane tetrafluoroborate ($MIBBF_4$), dissolved in propylene carbonate (PC) or acetonitrile (ACN), is newly synthesized and tested here for potential use as an electrolyte of capacitor. The $MIBBF_4$ salt exhibits higher ionic conductivity in ACN than in PC. The supercapacitive properties of capacitors containing an activated carbon electrode and various electrolytes are evaluated using cyclic voltammetry and electrochemical impedance spectroscopy. The capacitor adopting the $MIBBF_4$/ACN electrolyte shows the largest specific capacitance at low scan rates, whereas the capacitor adopting the 1-ethyl-3-methylimidazolium tetrafluoroborate $(EMIBF_4)$/ACN electrolyte shows the largest specific capacitance at high scan rates.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.111-118
• /
• 2003

Notch Antenna is a travelling wave type antenna and can provide multioctave operation in phased arrays that scan over wide angle. In this paper, we designed a wideband E-plane phased array antenna using E-plane waveguide simulator which has a bandwidth of 3 : 1 and a scan volume of $\pm$45$^{\circ}$ in E-plane. We compared impedance of single antenna and infinite array antenna using equivalent circuit modeling. We analyzed full structure of 1$\times$9 phased array antenna and we evaluated active reflection coefficient with variation of beam scan angle through mutual coupling coefficient acquired from simulation and investigated the variation of antenna gain with variation of active element pattern as beam scan angle is varied.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.9
• /
• pp.841-847
• /
• 2004

EMI emission characteristics of 42" AC-PDP panel are investigated in this paper. First, EMI emission source was modeled the scan electrode and the sustain electrode to a simple electric and magnetic dipole type radiator. Second, EMI emission source was modeled as reconfigured the scan electrode and the sustain electrode. The primary source of EMI emission was investigated using FEM calculation of the wave impedance and 3 dB beam width. The third. the EMI emission level was estimated using the measured sustain electrode current. Also, EMI emission level of 42" AC-PDP was measured. The results show that the calculated EMI emission level from the simple electric dipole model was shown to agree with that from the corresponding FEM simulation.

• Journal of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.103-109
• /
• 1981

An inexpensive, yet convenient analog storage device was constructed. Sequentially MOSFET-switched 20 sample and holds equipped with a high input impedance preamplifier were parallelly matched to the digitally controlled shift register system in variable speeds up to 3 kHz. To verify its usefulness, square wave train, sinusiodal wave and some electrochemical data, such as fast-scan voltammogram and transient current-time curves of differential pulse polarography were tested.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.2
• /
• pp.80-84
• /
• 2012

The polyaniline (PANI) electrodes are prepared by chemical synthesis and electrodeposition methods and their supercapacitive properties are characterized and compared by morphology observation, cyclic voltammetry as a function of scan rate, and impedance spectra analysis. In particular, the supercapacitive properties obtained in the range of higher potential scan rates (e.g., over $200mV\;s^{-1}$) are emphasized to be capable of utilizing adequately the high power capability of supercapacitor. As a result, the PANI electrode by the electrodeposition shows superior specific capacitance (max. $474F\;g^{-1}$ at $10mV\;s^{-1}$ and about $390F\;g^{-1}$ at $500mV\;s^{-1}$) than those by the chemical synthesis method. This is mainly due to highly porous structure obtained by the electrodeposition to yield higher specific surface area.