Investigation on Radiation Characteristics of 42″ AC-PDP

42″ AC-PDP의 방사특성에 대한 연구

  • 임헌용 (홍익대학교 전파통신공학과) ;
  • 김민석 (홍익대학교 전파통신공학과) ;
  • 박동욱 (홍익대학교 전자전기공학부) ;
  • 이정해 (홍익대학교 전파통신공학과)
  • Published : 2004.09.01

Abstract

EMI emission characteristics of 42" AC-PDP panel are investigated in this paper. First, EMI emission source was modeled the scan electrode and the sustain electrode to a simple electric and magnetic dipole type radiator. Second, EMI emission source was modeled as reconfigured the scan electrode and the sustain electrode. The primary source of EMI emission was investigated using FEM calculation of the wave impedance and 3 dB beam width. The third. the EMI emission level was estimated using the measured sustain electrode current. Also, EMI emission level of 42" AC-PDP was measured. The results show that the calculated EMI emission level from the simple electric dipole model was shown to agree with that from the corresponding FEM simulation.

Keywords

References

  1. Geunbae Kim, et al., Display Engineering, Cheong-beom, 2000
  2. Jotonari, et al., 'Observation of electromagnetic noi-se from a surface discharge AC PDP', EurdispIay, pp. 301-305, 1999
  3. Yasuhiro Shiraki, Shinji Tanable, 'EMI noise analysis of plasma display panels', Electromagnetic Compatibility International Symposium, pp. 766-769, 1999
  4. K. Yoshikawa, et al., 'A full color AC plasma display with 256 gray scale', Japan Display 1992 Digest, pp. 605-608, 1992
  5. Constantine A. Balanis, Antenna Theory, New York; Wiley, 1997
  6. Hun-Yong Lim, et al., 'A study of electromagnetic emission of 42 ' AC PDP module', International Meeting on Information Display, pp. 752-755, 2003
  7. Hun-Yong Lim, et al., 'Investigation on radiation characteristics of 42 ' PD'", International Disptay Workshops, pp. 921-924, 2003