• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권10호
• /
• pp.581-586
• /
• 2005

The multi-beam side scan sonar system uses the towfish installed sonars, it is an equipment that search images of the bottom surface of the sea in real time. It is a typical equipment that is related to a sea investigation such as a geological survey, seabed communication cable and power line cable placing repair investigation, fish breeding ground investigation, sea purification, relic and mineral investigation, and mine and submarine search. Recently, it is used to sea purification and geological survey that require information of the correct surface of the seabed. Therefore, this research develops multi-beam sensors for a side scan sonar that supply various information with the fast scan speed and correct high resolution that is not a simple underwater investigation equipment.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권9호
• /
• pp.1161-1166
• /
• 1999

Delay testing has become highlighted in the field of digital circuits as the speed and the density of the circuits improve greatly. However, delay faults in sequential circuits cannot be detected easily due to the existence of state registers. To overcome this difficulty a new scan filp-flop is devised which can be used for both stuck-at testing and delay testing. In addition, the new scan flip-flop can be applied to both the existing functional justification method and the newly-developed reverse functional justification method which uses scan flip-flops as storing the second test patterns rather than the first test patterns. Experimental results on ISCAS 89 benchmark circuits show that the number of testable paths can be increased by about 10% on the average.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.71-74
• /
• 2000

The purpose of format conversion is to convert a wide range of personal computer video formats into a target format. Circuits for the conversion have been developed by means of interpolation techniques, such as zero-order interpolation, bilinear interpolation, and bisigmoidal interpolation. This paper proposes a scan converter using cubic splines. The converter was modeled in VHDL on Max+PlusII and implemented with an FPGA chip. The circuit gives much better conversion performance than a scan converter with zero-order or linear interpolation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.392-395
• /
• 1999

The state assignment for a finite state machine greatly affects the delay, area, and testabilities of the sequential circuits. In order to minimize the dependencies among state variables, therefore possibly to reduce the length and number of feedback cycles, a new state assignment technique based on m-block partition is introduced in this paper. After the completion of state assignment and logic synthesis, partial scan design is performed to choose minimal number of scan flip-flops. Experiment shows drastic improvement in testabilities while preserving low area and delay overhead.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.539-544
• /
• 2004

In this study, locational information data acquisited by using the side scan sonar which is more precise than traditional submarine terrain' survey equipment. And the result of exploration through the object area(the East sea), accurate submarine terrain could be deciphered by sounded image. Also, in the future, side scan sonar's application will be maximized for the submarine terrain's sediment investigation to design or construction of ocean facilities.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2000년도 춘계학술대회 논문집
• /
• pp.91-95
• /
• 2000

The purpose of format conversion is to convert a wide range of personal computer video formats to a target format. Circuits for the conversion has been developed by means of interpolation techniques, such as zero-order interpolation, bilinear interpolation, and bisigmoidal interpolation. This paper proposes a scan converter using cubic splines. The converter was modeled in VHDL on Max+Plus II and implemented with an FPGA cpip. The circuit gives much better conversion performance than a scan converter with zero-order or linear interpolation.

• The International Journal of Costume Culture
• /
• 제6권1호
• /
• pp.19-29
• /
• 2003

The 3D measurement data expected be useful to give appropriate garment fit and development of MTM(Made-to-Measure) CAD software. The researcher surveyed the need and use of national anthropometric data of the apparel industry. 17 Korean apparel manufacturers participated in the study. The need of anthropometric data at 5 different apparel business sectors was measured: men's suit, women's dress, casual-wear, underwear, and active sportswear. The result of the survey shows that height and bust, waist, hip circumferences are needed by all of the business sectors. The body measurements at the scye and upper arm area were need most by the men's suit manufacturers. The women's foundation garment manufacturers were well prepared for the use of the 3D body scan data and they expected the potential benefits of 3D body scan data would be great. The researcher also conducted a case study and found a pro and con of the using 3D body scan data for apparel product developing process. In the current stage of technical advance, a reasonable method was required to get nude like scan data for the women's foundation garment manufacturer. The researcher concluded that the apparel designer could use the 3D scan data for developing tremendous style garment design and pattern making.

• 한국멀티미디어학회논문지
• /
• 제4권6호
• /
• pp.570-578
• /
• 2001

경계 주사 구조(Boundary Scan Architecture)기 법은 복잡한 인쇄 회로 기판(PCB : Printed Circuit Board)을 테스트하기 위해 도입되었다. 이러한 경계 주사 구조는 시스템의 정상 동작에 간섭을 주지 않고 시스템의 동작 상태를 실시간 모니터링 하는데 대단한 잠재력을 지니고 있다. 본 논문에서는 경계 주사 구조를 이용하여 시스템의 작동 상태를 실시간으로 모니터 하기 위한 새로운 실장 제어기를 제안하고 설계한다. 제안된 실시간 모니터링 실장 제어기는 경계 주사 구조의 경계 주사 셀 제어기(Test Access Port Controller)와 범용 실장 제어기(Embedded Controller)로 구성되어 있다. 제안된 경계 주사 구조를 이용한 실시간 모니터링 실장제어기는 하드와이어의 자원을 절약해 주고 경계 주사 구조를 지니고 있는 칩에 쉽게 인터페이스 된다. 실험 결과는 제안된 실장제어 기가 시스템의 동작 상태를 실시간 모니터 하는데 호스트 컴퓨터에 의한 모니터 링에 비해 효과적임을 보여준다.

• 한국의상디자인학회지
• /
• 제14권1호
• /
• pp.81-96
• /
• 2012

The purpose of this study is to provide fundamental information for standardization of 3D body measurement. This research analyzes errors occurring in the process of extracting body size from 3D body scan data. First, as a result of analyzing basic state of the 3D body scanner's calibration, the point number of each section was almost the same, while the right and left as well as the front and back coordinates of the center of gravity are not, showing unstable data. Nevertheless, the latter does not influence on the size of cylinder such as width and circumference. Next, we analyzed point coordinates variations of scan data on a mannequin nude by life casting. The result was great deflection in case of complicated or horizontal sections including the reference point beyond proper distance from centers of four cameras. In case of the mannequin's size, accuracy proves comparatively high in that measurement errors in height, width, depth, and length dimension occurred all within allowable errors, only except chest depth, while there were a lot of measurement errors in a circumference dimension. Secondly, analysis of accuracy of automatic extraction identification program algorithm presented that a semi-automatic measurement program is better than an automatic measurement program. While both of them ate very acute in parts related to crotch, they are not in armpit related parts. Therefore, in extracting of human body size from 3D scan data, what really matters seems to parts related to armpits.

• 대한치과보철학회지
• /
• 제55권4호
• /
• pp.436-443
• /
• 2017

과거의 computer-aided design/computer-aided manufacturing (CAD/CAM) 기술 형태는 사용자가 한 제조사의 구성요소만 사용해야 하는 폐쇄적인 시스템이었다면, 현재는 여러 제조사의 구성요소 중 사용자가 필요에 맞는 구성요소를 선택해서 사용할 수 있는 유연성을 가진 개방적인 시스템 형태로 변화하였다. 치과재료와 보철물 제작 기술의 발전에도 불구하고 의치 제작은 지난 100년 가까이 전통적인 제작방식을 따랐다. 하지만 최근 들어 기존 의치 제작의 단점을 보완하고자 CAD/CAM 제작 의치에 관한 연구가 활발히 이루어지고 있으며, 밀링이나 3D 프린팅을 이용해 상용화된 형태의 CAD/CAM 제작 의치가 이미 임상에서 쓰이고 있다. 본 증례는 3D face scan을 활용한 CAD/CAM 의치 제작의 가능성을 확인하고, CAD/CAM과 전통적인 방법으로 제작한 의치를 비교한 결과에 대해 보고하고자 한다.