• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.339-340
• /
• 2008

This paper presents a novel design of the printed hyperpolar-transformed Sierpinski Carpet (HSC) antenna. By hyperpolar transforming the Sierpinski carpet geometry, from isotropic scaling symmetry to equiangular scaling symmetry, we get improved performance rather than that of the general Sierpinski Carpet antenna. The design parameter and performance of the proposed monopole antenna are investigated by simulation. And we showed that proposed HSC geometry gives more freedom for wideband antenna design such as flare angle, (angular)scale factor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.3
• /
• pp.193-198
• /
• 2002

In this paper, we Propose a PD+I fuzzy controller using an error-accumulating applying factor. In fuzzy control, analytical study was done formerly, in which fuzzy control can be classified by PD type and PI type, and also the study for getting merits of both types was done, too. But the mixed type has a complex structure and many parameters. The proposed fuzzy controller is 2-input 2-out-put and PD type fuzzy control is used as a basic structure. And the proposed controller annihilates a steady-state error and improves transient responses because of using the error-accumulating applying factor which is determined in the real time along the current state of controlled process. Futhermore it is easy to tune the system because of decreasing the number of scaling factors and the I type controller with resetting resolves the integral wind-up problem. Finally we apply the proposed scheme to various plants and show the performance betterment.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.44-47
• /
• 1998

나눗셈 알고리즘은 다른 덧셈이나 곱셈 알고리즘과 비교하여 복잡하고, 수행빈도수 적다는 이류로 그 동안 고속 나눗셈의 하드웨어 연구는 활발하지 않았다. 그러나 멀티미디어의 발전으로 고속 나눗셈의 필요성 및 전체적인 수행 시간 향상을 위해 고속 나눗셈 연산기의 중요성은 더욱 부각되고 있다. 그러나 칩의 크기는 제작 단가와 깊은 관련이 있기 때문에 고속 나눗셈 연산기를 칩으로 제작할 때 요구되는 성능과 비용을 만족하기 위한 적절한 분석이 필요하다. 본 논문은 자릿수 순환(Digt Recurrence) 알고리즘에서 속도가 빠른 높은 자릿수 이용(Very-High Radix) 알고리즘을 기반으로 최적화된 자릿수 (Radix) 범위를 제시하였다. 그리고 변환요소 (Scaling Factor)를 전처리(Pre-processing)하여 연산의 주기를 감소하고, 크기의 문제를 해결하기 위해서 상수표 대신 제어(Control)방법으로 값을 구하는 방법을 설계하였다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.254-254
• /
• 2004

Final disposal of radioactive waste generated from Nuclear Power Plant (NPP) requires the detailed information about the characteristics and the quantities of radionuclides in waste package. Most radionuclides are difficult to measure and expensive to assay. Thus it is suggested to the indirect method by which the concentration of the Difficult-to-Measure (DTM) nuclide is estimated using the correlations of concentration-it is called the scaling factor-between Easy-to-Measure (Key) nuclides and DTM nuclides with the measured concentration of the Key nuclide.(omitted)

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.486-490
• /
• 2002

When the fuzzy controller apply to a real plant, We have not excepted result of a satisfactory control by modeling error and lacking information about an plant. In this case, we have to adjust the scale factors for improvement of the control performance and this method need a lot of time and cost for perform a trial and error. In this paper, we proposed the fuzzy controller with the automatic adjustment of scaling factors. It was improve upon the control performance using a adequate scale factor by fuzzy logic and normalizer. As the results of simulation through the second order plant, we confirmed that the proposed the fuzzy controller within the function of automatic scale get a good response compare with the fuzzy controller within the fixed scale factor.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.80-84
• /
• 2001

When the fuzzy controller apply to a real plant, We have not excepted result of a satisfactory control by modeling error and lacking information about an plant. In this case, we have to adjust the control factors for improvement of the control performance and this method need a lot of time and cost for perform a trial and error. In this paper, we proposed the fuzzy regulator with the automatic adjustment of scaling factors. It was improve upon the control performance using a adequate scale factor by fuzzy inference. We implemented the controller using the DSP processor and applied in a hydraulic servo system. And then we observed an experimental results.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.4
• /
• pp.111-118
• /
• 1995

This paper presents the modified fuzzy-compensated PID(FCPID) control, which involves adding the compensator to an existing PID controller, to improve the performances of the systems. Compared to a conventional PID control and a fuzzy logic control(FLC), the proposed control scheme has superior performance. Experimental results of an actual implementation of the modified PC-based FCPID controller on the DC servo-motor demonstrate considerable improve- ment of the performance of the existing FCPID control by monitoring the scaling factor. They show faster responses and smaller overshoots than the conventional FCPID control scheme for the various reference inputs and the robustness to the loads.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.179.5-179
• /
• 2001

Generally, while PD-type fuzzy controller has good performance in transient period, it has uniform steady state error of response. To improve limitations of PD-type fuzzy controller, we propose a new fuzzy controller to improve the performance of transient response and to eliminate the steady state error of response. In this paper, PD-type fuzzy controller is used a simplified indirect inference method(SIIM). When the SIIM is applied, the proposed method has the capability of the high speed inference and adapting with increasing the number of the fuzzy input variables easily. The outputs of this controller are the output calculated by PD-type fuzzy controller and the accumulated error scaling factor. Here, the accumulated error scaling factor is adjusted by fuzzy rule according to the system state variables. To show the usefulness of the proposed controller, it is applied to 0-type 2nd-order linear system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.143-152
• /
• 2004

In this paper, we propose the new algorithms of watermarking that utilize the characteristics of color images for solving the trade-off problem between the image quality and the robustness. Since the human visual characteristics of each RGB channel are different, we can gain more robust watermarking on the condition of the same image degradation.

• Journal of electromagnetic engineering and science
• /
• v.13 no.3
• /
• pp.158-164
• /
• 2013

This paper expands a previously proposed optimized higher order (2, 4) finite-difference time-domain scheme (H(2, 4) scheme) for use with lossy material. A low dispersion error is obtained by introducing a weighting factor and two scaling factors. The weighting factor creates isotropic dispersion, and the two scaling factors dramatically reduce the numerical dispersion error at an operating frequency. In addition, the results confirm that the proposed scheme performs better than the H(2, 4) scheme for wideband analysis. Lastly, the validity of the proposed scheme is verified by calculating a scattering problem of a lossy circular dielectric cylinder.