• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.1
• /
• pp.28-36
• /
• 2018

The experimental results of the model tests for the twin propeller cavitation noise are presented. The model test was carried out by means of procedure of noise measurement followed by the signal processing and full-scale extrapolation. In order to convert the measured sound pressure level into the sound source level, transfer function measurements for three conditions were performed according to the combination of locations and number of virtual sources. White noise and LFM signal were used as a source signals to examine the influence of the input signal. For the twin propellers, 5 transfer functions were defined and the results were discussed. Cavitation noise measurement tests were performed similarly to the transfer function measurement test. Noise source localization analysis was performed to confirm the test effectiveness. It was confirmed that the source level of the twin propeller can be estimated reliably by using transfer function corrections. Finally, the model test results were converted into full-scale by applying the ITTC '87 model-ship scaling raw, and the validity of the model test was confirmed by comparison with the full-scale measurement result.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9B
• /
• pp.832-844
• /
• 2008

Distributed localization algorithms are necessary for large-scale wireless sensor network applications. In this paper, we introduce an efficient node distribution based localization algorithm that emphasizes simple refinement and low system load for low-cost and low-rate wireless sensors. Each node adaptively chooses neighbor nodes for sensors, update its position estimate by minimizing a local cost function and then passes this update to the neighbor nodes. The update process considers a distribution of nodes for large-scale networks which have same density in a unit area for optimizing the system performance. Neighbor nodes are selected within a range which provides the smallest received signal strength error based on the real experiments. MATLAB simulation showed that the proposed algorithm is more accurate than trilateration and les complex than multidimensional scaling. The implementation on MicaZ using TinyOS-2.x confirmed the practicality of the proposed algorithm.

• Journal of The Korean Astronomical Society
• /
• v.53 no.5
• /
• pp.103-115
• /
• 2020

We analyze the spatially resolved kinematics of gas and stars for a sample of ten hidden type 1 AGNs in order to investigate the nature of their central sources and the scaling relation with host galaxy stellar velocity dispersion. We select our sample from a large number of hidden type 1 AGNs, which are identified based on the presence of a broad (full width at half maximum ≳1000 km s^-1) component in the Hα line profile and which are frequently mis-classified as type 2 AGNs because AGN continuum and broad emission lines are weak or obscured in the optical spectral range. We used the Blue Channel Spectrograph at the 6.5-m Multiple Mirror Telescope to obtain long-slit data with a spatial scale of 0.3 arcsec pixel^-1. We detected broad Hβ lines for only two targets; however, the presence of strong broad Hα lines indicates that the AGNs we selected are all low-luminosity type 1 AGNs. We measured the velocity, velocity dispersion, and flux of stellar continuum and gas emission lines (i.e., Hβ and [O III]) as a function of distance from the center. The spatially resolved gas kinematics traced by Hβ or [O III] are generally similar to the stellar kinematics except for the inner center, where signatures of gas outflows are detected. We compare the luminosity-weighted effective stellar velocity dispersions with the black hole masses and find that our hidden type 1 AGNs, which have relatively low back hole masses, follow the same scaling relation as reverberation-mapped type 1 AGN and more massive inactive galaxies.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.2
• /
• pp.195-202
• /
• 2013

The relationship between occlusion and periodontal health has been studied extensively. Despite this, there are few reports on the effects of intentional passive eruption (IPE) using an occlusal reduction. The aim of this clinical report was to present the favorable long-term results of IPE using an occlusal reduction combined with scaling and root planing. After periodontal examination, teeth were diagnosed as moderate chronic periodontitis with intrabony defects and mobility. IPE was performed using periodic occlusal reduction combined with initial periodontal therapy. All teeth examined healed uneventfully and the patients did not complain of discomfort. It has been clinically well maintained during 8 years after completion of IPE. Overall, these results suggest that the IPE would be helpful in improving periodontal health.

• Journal of Broadcast Engineering
• /
• v.8 no.4
• /
• pp.473-480
• /
• 2003

In this paper, we propose a new quadtree coding a1gorithm to improve the performance of the old one. The new algorithm can process any frame of size in standard and reduce encoding and decoding time by decreasing computational load. It also improves the image quality comparing with any old quantizer based on quadtree and zerotree structure. In order for the new algorithm to be applied for real video codec, we analyze the statistical characteristics of coefficients of differential image and add a function that makes It deal with an arbitrary size of image by using new technique while the old one process by block unit. We can also improve the image quality by scaling the coefficient's value from a differential image. By comparing the performance of the new algorithm with quadtree and SPIHT, it Is shown that PSNR is improved, that the computational load is not reduced in encoding and decoding.

• Structural Engineering and Mechanics
• /
• v.71 no.4
• /
• pp.391-405
• /
• 2019

Compared to the ambient vibration test mainly identifying the structural modal parameters, such as frequency, damping and mode shapes, the impact testing, which benefits from measuring both impacting forces and structural responses, has the merit to identify not only the structural modal parameters but also more detailed structural parameters, in particular flexibility. However, in traditional impact tests, an impacting hammer or artificial excitation device is employed, which restricts the efficiency of tests on various bridge structures. To resolve this problem, we propose a new method whereby a moving vehicle is taken as a continuous exciter and develop a corresponding flexibility identification theory, in which the continuous wheel forces induced by the moving vehicle is considered as structural input and the acceleration response of the bridge as the output, thus a structural flexibility matrix can be identified and then structural deflections of the bridge under arbitrary static loads can be predicted. The proposed method is more convenient, time-saving and cost-effective compared with traditional impact tests. However, because the proposed test produces a spatially continuous force while classical impact forces are spatially discrete, a new flexibility identification theory is required, and a novel structural identification method involving with equivalent load distribution, the enhanced Frequency Response Function (eFRFs) construction and modal scaling factor identification is proposed to make use of the continuous excitation force to identify the basic modal parameters as well as the structural flexibility. Laboratory and numerical examples are given, which validate the effectiveness of the proposed method. Furthermore, parametric analysis including road roughness, vehicle speed, vehicle weight, vehicle's stiffness and damping are conducted and the results obtained demonstrate that the developed method has strong robustness except that the relative error increases with the increase of measurement noise.

• Korean Journal of Materials Research
• /
• v.34 no.6
• /
• pp.283-290
• /
• 2024

The aggressive scaling of dynamic random-access memory capacitors has increased the need to maintain high capacitance despite the limited physical thickness of electrodes and dielectrics. This makes it essential to use high-k dielectric materials. TiO₂ has a large dielectric constant, ranging from 30~75 in the anatase phase to 90~170 in rutile phase. However, it has significant leakage current due to low energy barriers for electron conduction, which is a critical drawback. Suppressing the leakage current while scaling to achieve an equivalent oxide thickness (EOT) below 0.5 nm is necessary to control the influence of interlayers on capacitor performance. For this, Pt and Ru, with their high work function, can be used instead of a conventional TiN substrate to increase the Schottky barrier height. Additionally, forming rutile-TiO₂ on RuO₂ with excellent lattice compatibility by epitaxial growth can minimize leakage current. Furthermore, plasma-enhanced atomic layer deposition (PEALD) can be used to deposit a uniform thin film with high density and low defects at low temperatures, to reduce the impact of interfacial reactions on electrical properties at high temperatures. In this study, TiO₂ was deposited using PEALD, using substrates of Pt and Ru treated with rapid thermal annealing at 500 and 600 ℃, to compare structural, chemical, and electrical characteristics with reference to a TiN substrate. As a result, leakage current was suppressed to around 10^-6 A/cm² at 1 V, and an EOT at the 0.5 nm level was achieved.

• Wind and Structures
• /
• v.38 no.4
• /
• pp.261-275
• /
• 2024

Before performing an experimental study on the downburst-generated wave, it is necessary to examine the scale effects and corresponding corrections or compensations. Analysis of similarity is conducted to conclude the non-dimensional force ratios that account for the dynamic similarity in the interaction of downburst with wave between the prototype and the scale model, along with the corresponding scale factors. The fractional volume of fluid (VOF) method in association with the impinging jet model is employed to explore the characteristics of the downburst-generated wave numerically, and the validity of the proposed scaling method is verified. The study shows that the location of the maximum radial wind velocity in a downburst-wave field is a little higher than that identified in a downburst over the land, which might be attributed to the presence of the wave which changes the roughness of the underlying surface of the downburst. The impinging airflow would generate a concavity in the free surface of the water around the stagnation point of the downburst, with a diameter of about two times the jet diameter (D_jet). The maximum wave height appears at the location of 1.5D_jet from the stagnation point. Reynolds number has an insignificant influence on the scale effects, in accordance with the numerical investigation of the 30 scale models with the Reynolds number varying from 3.85 × 10⁴ to 7.30 × 10⁹. The ratio of the inertial force of air to the gravitational force of water, which is denoted by G, is found to be the most significant factor that would affect the interaction of downburst with wave. For the correction or compensation of the scale effects, fitting curves for the measures of the downburst-wave field (e.g., wind profile, significant wave height), along with the corresponding equations, are presented as a function of the parameter G.

• Journal of dental hygiene science
• /
• v.8 no.2
• /
• pp.97-101
• /
• 2008

This study was aimed to provide basic data which are fairly useful to improve satisfaction level of patients by analyzing factors related to each functional satisfactions of dental implant treatment. The subjects of this study were 120 patients who received implant treatment and analyzed with t-test, one-way ANOVA and pearson's correlation. The results of this study were as follows. 1. Differences of each functional satisfaction according to general characteristics was not reveal statistically significant. 2. A group to got periodic scaling and tooth brushed four or more times a day showed the highest satisfaction of social and esthetic function(p < .05). 3. A group to implantation in premolar area showed the highest satisfaction of masticatory function and a group to implantation in incisor to be high in satisfaction of social and esthetic function, but the differences were not statistically significant 4. A group to got implant treatment at a dental hospital showed the highest satisfaction of both social and esthetic function, and at a general hospital were found lowest(p < .05). 5. Masticatory function, social function, esthetic function, and overall satisfaction were found to be in a positive correlations, and especially, the correlation coefficient between the overall satisfaction and social function was found to be highest(p < .01).

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.325-332
• /
• 1998

In the context of total quality management, customer satisfaction is a key factor of success. Customer needs have been in the past described with rather vague words. In order to lead in the competitive market, product designers must be willing to interpret and reflect customer perceptions of a product on the design. The objective of this research is to develop a systematic process capable of linking customer preferences on a product to the design of product elements or specifications. The design process consists of multivariate statistical analyses, semantic differentials, and multidimensional scaling techniques under the framework of a methodology known as quality function deployment which is frequently used to construct a quality design process. The process being established is expected to serve as an effective means to communicate between the customer and the designer through proper representational schemes of design elements.