• Journal of Industrial Technology
• /
• v.37 no.1
• /
• pp.12-15
• /
• 2017

It is important in dentistry that the provisional cement should be cleaned thoroughly from the crown before definitive cementation. The provisional cement has been removed by physical means such as curette, scaler, pumice, or sand-blasting with alumina particles, which is time-consuming, irritating, tedious, even causing crack. To avoid such troubles occurring through such physical cleaning means, the chemical solutions for dissolving the provisional cement remaining in dental crown were prepared, and solubilizing power of the solutions was measured and compared. The solution composed of MEA, NaOH, chloride chemicals ($CHCl_3$, $CCl_4$, $CH_2Cl_2$), surfactants (Igepal, Tween20), chelating agent (EDTA), and Ethyl cellosolve was most effective for dissolving the provisional cement.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.952-954
• /
• 2005

The objective of this paper is to propose the image interpolation method with pseudomedian filter for Field warping and morphing, and to evaluate and analyze its subjective image quality. The Field warping relatively gives rise to more computing overhead, but it can use the control line to control the warping result with more elaboration. Due to the working characteristics of the image warping and morphing process, various complex geometrical transformations occur and a image interpolation technique is needed to effectively process them. Of the various interpolation techniques, bilinear interpolation which shows above average performance is the most widely used. However, this technology has its limits in the reconstructivity of diagonal edges. The proposed interpolation method is to efficiently combine the bilinear interpolation and the pseudomedian filter0based interpolation which shows good performance in the reconstructivity of diagonal edges. According to the proposed interpolation method, we could get more natural warping and morphing results than other interpolation methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.307-310
• /
• 2005

본 논문은 CMOS 센서의 ISP 전처리 과정 후 최종 화면에 출력하기 위한 효과적인 이미지 스케일 블록을 저전력, 저비용에 맞은 독립된 하드웨어 장치로 설계 하고자 한다. 카메라 센서 이미지 결과를 디스플레이 장치(OSD(On Screen Display)에 맞는 화면의 크기는 CIF(352${\times}$288), QCIF(176${\times}$144) 출력 모드를 사용한다. 최근 DMB 휴대용 멀티미디어 데이터 전송 사이즈 포맷에서도 위와 같은 사이즈를 지원하고 있다. 일반적인 스케일 처리에서는 PC 그래픽 카드(Graphic Card)장치의 지원을 받아서 처리하는 경우가 많다. 또는 CPU의 연산을 통한 CPU 자원을 점유하여 이미지 스케일을 처리하였다. 휴대용 CMOS 센서용에 적합한 독립적으로 처리할 수 있는 이미지 스케일 기능을 하드웨어로 설계하여 효과적인 시스템 운용과 고속 이미지 스케일 처리가 가능한 하드웨어를 설계하는게 목적이다. 이를 구현 하기위해 기존 알고리즘과 제안한 알고리즘을 비교하여 최적화된 알고리즘 적용하여 VHDL설계언어를 이용한 하드웨어 설계 후, ModelSim 6.0a를 이용하여 데이터를 검증한다.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.4
• /
• pp.547-556
• /
• 2011

Objectives : The purpose of this study was to examine the relationship between the infection control education experiences of dental hygienists and the state of their infection control. Methods : The subjects in this study were the dental hygienists who worked in Seoul. The relationship of their infection control education experiences to their gender, marital status, academic credential, workplace, length of service, infection control implementation, experience of being exposed to infection, way of coping with it, hand washing, use of personal protection devices and equipment management was analyzed. Results : It is found that the variable to affect the state of infection control was educational experiences about handpiece water pipe management, ultrasonic scaler water pipe management and three-way syringe water pipe management. Conclusions : Dental hygienists who are one of major dental personnels should receive systematic education on infection control to acquire accurate knowledge to ensure the successful prevention of cross infection.

• 보존과학연구
• /
• s.19
• /
• pp.179-191
• /
• 1998

The Dumu of casted iron objects which is the big vessel for the prevention of fire to wood building is conserved in Kyongpok Palace(Dumu sizes：diameter 97cm, height 42cm, thickness 2cm, weight 250kg). The treated objects which some parts were lost, were not corroded, but cracted and broken by an external power, and strongly attached an cement layer on inside surface. First of all cement layer was mechanically removed by pneumatic needle scaler, welded to electric method for broken and cracked pieces, and then the lost sections were restored to use a epoxy resin and glass fiber. In order to prevent a damage during the handling, the restoration section of the inside surface was treated different colour in comparison with original part.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.587-589
• /
• 2003

I. Objectives The purpose of this study was to evaluate the effects of EDTA on microhardness of roor canal dentine according to different working time. II. Materials and Methods Forty recently extracted, intact single root teeth were used. Debris and soft tissue remnants on the root surface were cleaned with scaler and stored in saline at $4^{\circ}C$ until used. All selected roots were similar in size and shape. 1. Preparation of teeth. The crown of the teeth were removed at the level of the CEJ, using a water-cooled diamond bur.(omitted)

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.33-35
• /
• 2011

얼굴 검출 시스템에서 얼굴의 검출율과 처리 속도는 중요한 고려사항이며 이 두 가지는 서로 비례 관계에 있다. 현재 얼굴 검출 시스템은 소프트웨어 처리가 대부분이며 소프트웨어만으로는 HD(High Definition)의 영상 처리는 어렵다. 따라서 본 실시간 얼굴 검출 영상처리를 위한 전처리 과정 중에 하나인 영상 축소기를 설계하고 이를 구현 및 검증하였으며 소프트웨어로 작성된 알고리즘과 처리 속도를 비교하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.3
• /
• pp.43-53
• /
• 2003

Unlike in analog display devices, the physical screen resolution in digital devices are fixed from the manufacturing. It is a weak point on digital devices. The screen resolution displayed in digital display devices is varied. Thus, interpolation or decimation of the resolution on the display is needed to make the input pixels equal to the screen resolution., This process is called image scaling. Many researches have been developed to reduce the hardware cost and distortion of the image of image scaling algorithm. In this paper, we proposed a Winscale algorithm. which modifies the scale up/down in continuous domain to the scale up/down in discrete domain. Thus, the algorithm is suitable to digital display devices. Hardware implementation of the image scaler is performed using Verilog XL and chip is fabricated in a 0.5${\mu}{\textrm}{m}$ Samsung SOG technology. The hardware costs as well as the scalabilities are compared with the conventional image scaling algorithms that are used in other software. This Winscale algorithm is proved more scalable than other image-scaling algorithm, which has similar H/W cost. This image-scaling algorithm can be used in various digital display devices that need image scaling process.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.1
• /
• pp.15-26
• /
• 2009

The purpose of this study was to prepare improved education guideline by grasping parts and items felt difficult to apply instruments by the students of the dental hygiene department in the practice of oral prophylaxis using manikin and analyzing factors influencing the satisfaction at the oral prophylaxis subject. To achieve this purpose, 285 senior students of the dental hygiene department located in the Kwangju. Jeonnam area who took theory and practice courses of oral prophylaxis but only practiced the manikin from the second semester of 1st year were selected as the subjects. The following results were obtained. 1. In the manikin, the most difficult part was maxillary anterior lingual in the use of explorer, sickle scaler, and universal curet, and maxillary right posterior lingual was in the use of gracey curet. In the dentiform, the most difficult item was instrument stroke in the use of explorer, sickle scaler, universal curet and gracey curet. 2. The highest stressor was the lack of knowledge and skill in practice of oral prophylaxis, followed by the lack of confidence, and difference between theory and practice in oral prophylaxis. The overall practice satisfaction was 3.23 at oral prophylaxis. The highest satisfaction was found in patient and operator position(3.51), followed by basic skill(3.34), the way to use hand instrumentation(3.16), and the way to use oral examination instrumentation(3.01). 3. According to school records, satisfaction at oral prophylaxis practice satisfaction was 3.36 of good, 3.24 of fair, and 3.06 of poor, suggesting significant difference(p<0.05). Students who participated just in practice during a school term showed 3.47 of satisfaction. The highest satisfaction was found in a full-time professor as a professor in charge(3.24) and there was significant difference(p<0.05). 4. The highest correlated factor between oral prophylaxis theory and practice satisfaction was curriculum satisfaction. The use of hand instrumentation was found to have the greatest effect on the practice satisfaction at oral prophylaxis, followed by basic skill, the way of basic instrumentation, and position. There was statistically significant difference(p<0.01).

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.613-622
• /
• 1996

The purposes of this study were to evaluate and compare the frequency of ceramic bracket fracture, frequency of enamel fracture, bond fracture site, adhesive remnant index after mechanical and electrothermal debracketing, to evaluate effectiveness of high and low speed rotary instrument and ultrasonic instrument during residual adhesive remnants removal, and to measure resin film surface(percentage) using by image analyser(Leco 300). Bond fracture site, bracket fracture, and enamel surface damage were examined by scanning electron microscope. The following results were obained : 1. In the mechanical debracketing group, the bond failed predominantly at enamel-adhesive interface with the bulk of adhesive remaining on bracket base. 2. In the eletrothermal debracketing group, the bond failed predominantly at adhesive-bracket interface with the bulk of adhesive remaining on enamel surface. 3. The most effectiveness of residual resin removal was obtained by means of the resin polishing bur and the order of scratch formation was the procedure using tungsten carbide bur, ultrasonic scaler, sof-lex disc, and polishing bur. 4. The order of the resin film surface percentage was ultrasonic scaler, tungsten carbide bur, sof-lex disc, and resin polishing bur.