• 터널과지하공간
• /
• 제22권3호
• /
• pp.205-213
• /
• 2012

본 연구에서는 $30^{\circ}$ 경사진 층리면을 가진 이방성 암반내 위치한 쌍굴터널에서 터널간 이격거리와 터널 단면의 형상이 서로 다른 다섯 가지 모형에 대해 측압계수 2의 하중조건으로 축소모형실험을 실시하였다. 실험을 통해 모형별 균열개시압력과 터널 주변지반의 변형거동을 조사하였으며, 이 조건들이 터널의 안정성에 어떠한 영향을 미치는지를 알아보았다. 터널간 이격거리가 작은 모형일수록 필라에서는 층리면을 따른 전단파괴가 발생하였으며 낮은 압력수준에서 균열이 발생하여 터널의 안정성은 상대적으로 작은 것으로 평가되었다. 사심아치형, 원형, 반원아치형 터널 모형들에 대한 실험에서 반원아치형 터널이 가장 작은 균열개시압력을 보여 터널 안정성이 가장 작게 나타났으며, 원형 터널의 안정성이 가장 크게 나타났다. 또한, 사심아치형 터널의 변형거동은 원형 터널과 반원아치형 터널의 중간적인 형태를 나타내었으며 터널 안정성도 중간정도에 해당하였다. FLAC을 사용한 수치해석 결과는 모형실험의 결과와 정성적으로 부합하였다.

• 터널과지하공간
• /
• 제16권4호
• /
• pp.313-325
• /
• 2006

본 연구에서는 이방성 암반의 방향성 및 측압조건이 터널 변형거동에 미치는 영향을 조사하기 위하여 서로 다른 15가지 이방성 터널 모형에 대해 축소모형실험을 실시하였다. 이를 위해 모래 석고 물의 중량비를 달리한 모형재료에 대한 물성 실험을 통하여 모형재료의 특성을 연구하였다. 대부분의 이방성 터널 모형은 응력이 집중되는 곳에서 전단파괴 현상을 보였으며 절리면을 따라 미끄러짐이 발생하여 절리면의 경사 방향이 터널 변형거동에 큰 영향을 미친 것으로 나타났다. 절리 경사가 $30^{\circ}$보다 작은 모형에서는 반팽창현상이 두드러지게 나타났으며 절리경사가 $50^{\circ}$인 모형은 측압조건에 관계없이 수직 및 수평 내공변위가 가장 작게 나타나 실험된 모형중에서 가장 안정적인 모형으로 판단된다. 또한 모형터널의 파괴 및 변형양상은 측압계수 조건에 따라 매우 상이하게 나타났다.

• Structural Engineering and Mechanics
• /
• 제68권6호
• /
• pp.747-760
• /
• 2018

In the present study, a methodology for developing fragilities of arch concrete dams to assess their performance against seismic hazards is introduced. Firstly, the probability risk and fragility curves are presented, followed by implementation and representation of the way this method is used. Amirkabir arch concrete dam was subjected to non-linear dynamic analyses. A modified three dimensional rotating smeared crack model was used to take the nonlinear behavior of mass concrete into account. The proposed model considers major characteristics of mass concrete. These characteristics are pre-softening behavior, softening initiation criteria, fracture energy conservation, suitable damping mechanism and strain rate effect. In the present analysis, complete fluid-structure interaction is included to account for appropriate fluid compressibility and absorptive reservoir boundary conditions. In this study, the Amirkabir arch concrete dam is subjected to a set of 8 three-component earthquakes each scaled to 10 increasing intensity levels. Using proposed nonlinear smeared crack model, nonlinear analysis is performed where the structure is subjected to a large set of scaled and un-scaled ground motions and the maximum responses are extracted for each one and plotted. Based on the results, fragility curves were plotted according to various and possible damages indexes. Discrete damage probabilities were calculated using statistical methods for each considered performance level and incremental nonlinear analysis. Then, fragility curves were constructed based on the lognormal distribution assumption. Two damage indexes were introduced and compared to one another. The results indicate that the dam has a proper stability under earthquake conditions at MCE level. Moreover, displacement damages index is more conservative and impractical in the fragility analysis than tensional damage index.

• Geomechanics and Engineering
• /
• 제24권5호
• /
• pp.457-470
• /
• 2021

In this study, the pull-out behavior of a tunnel-type anchorage for suspension bridges was investigated using experimental tests and image processing analyses. The study focused on evaluating the initial failure behavior and failure mode of the tunnel-type anchorage. In order to evaluate the failure mode of tunnel-type anchorage, a series of scaled model tests were conducted based on the prototype anchorage of the Ulsan Grand Bridge. In the model tests, the anchorage body and surrounding rocks were fabricated using a gypsum mixture. The pull-out behavior was investigated under plane strain conditions. The results of the model tests demonstrate that the tunnel-type anchorage underwent a wedge-shaped failure. In addition, the failure mode changed according to the differences in the physical properties of the surrounding rock and the anchorage body and the size of the anchor plate. The size of the anchor plate was found to be an important parameter that determines the failure mode. However, the difference in physical properties between the surrounding rock and the anchorage body did not affect its size. In addition, this study analyzed the initial failure behavior of the tunnel-type anchorage through image analysis and confirmed that the failure was sequentially transferred from the inside of the tunnel to the surrounding rock according to the image analysis. The reasonable failure mode for the design of the tunnel-type anchorage should be wedge-type rather than pull-out type.

• 터널과지하공간
• /
• 제21권2호
• /
• pp.103-108
• /
• 2011

콘크리트 블록에 대한 붙이기 발파실험과 더불어 콘크리트 박스거더 교량의 모형에 대하여 발파해체 실험을 실시하였다. 장약으로는 폭발위력의 기준 약으로 사용되는 TNT를 사용하였다. 실험결과 콘크리트 박스거더 교량의 경우 폭약설치지점의 폭발력뿐 만 아니라 박스거더 내부 벽에 작용하는 폭풍압도 해체에 영향을 미치는 것으로 나타났다.

• 전기학회논문지
• /
• 제63권11호
• /
• pp.1602-1607
• /
• 2014

This paper deals with the design and property analysis of 7kW-class small-scaled superconducting Linear Synchronous Motor (LSM) and testing equipment for a number of performance pre-tests prior to the development of coreless-type superconducting LSM suitable for 600km/h very high speed train. First, the basic design and property analysis are conducted before developing a small-scaled superconducting LSM model with 2-pole superconducting electromagnets, and additionally the cost-down design of the superconducting electromagnets is conducted to use less high-Tc superconducting wire. Finally, the superconducting magnet coil span is selected at 120mm, and input ground armature current of 670Aturns is required to produce 44.7N of thrust based on research findings.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.543-550
• /
• 2011

The development of railway vehicles such as new mechanism of railway vehicle or design parameters of suspension have been used the application of scaled roller rig to the study of railway vehicle dynamics. In this paper, the critical speed was compared between full scale and 1:5 scale of numerical model. And to verify the simulation results, the critical speed was confirmed using the 1:5 scaled roller rig. According to the results, we expect that the developed roller rig will be used in the study for the dynamic characteristics of railway vehicle.

• Geomechanics and Engineering
• /
• 제35권4호
• /
• pp.425-436
• /
• 2023

An effective tool for researching actual problems in geotechnical and mining engineering is to conduct physical modeling tests using similar materials. A reliable geometric scaled model test requires selecting similar materials and conducting tests to determine physical properties such as the mixing ratio of the mixed materials. In this paper, a method is proposed to determine similar materials that can reproduce target properties using a polynomial model based on experimental results on modeling materials using a gypsum-sand mixture (GSM) to simulate rocks. To that end, a database is prepared using the unconfined compressive strength, elastic modulus, and density of 459 GSM samples as output parameters and the weight ratio of the mixing materials as input parameters. Further, a model that can predict the physical properties of the GSM using this database and a polynomial approach is proposed. The performance of the developed method is evaluated by comparing the predicted and observed values; the results demonstrate that the proposed polynomial model can predict the physical properties of the GSM with high accuracy. Sensitivity analysis results indicated that the gypsum-water ratio significantly affects the prediction of the physical properties of the GSM. The proposed polynomial model is used as a powerful tool to simplify the process of determining similar materials for rocks and conduct highly reliable experiments in a physical modeling test.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.145-150
• /
• 1998

8$\times$8 bit scaled SONOSFET NAND type flash EEPROM that shows better characteristics on cell density and endurance than NOR type have been designed and its electrical characteristics are verified with computer aided simulation. For the simulation, the spice model parameter was extracted from the sealed down SONOSFET that was fabricated by $1.5mutextrm{m}$ topological design rule. To improve the endurance of the device, the EEPROM design to have modified Fowler-Nordheim tunneling through the whole channel area in Write/Erase operation. As a result, it operates Write/Erase operation at low current, and has been proven Its good endurance. The NAND type flash EEPROM, which has upper limit of V$_{th}$, has the upper limit of V$_{th}$ as 4.5V. It is better than that of floating gate as 4V. And a EEPROM using the SONOSFET without scaling (65$\AA$-l65$\AA$-35$\AA$), was also designed and its characteristics have been compared. It has more possibliity of error from the V$_{th}$ upper limit as 4V, and takes more time for Read operation due to low current. As a consequence, it is proven that scaled down SONOSFET is more pertinent than existing floating gate or SONOSFET without scaling for the NAND type flash EEPROM.EPROM.

• Journal of Mechanical Science and Technology
• /
• 제15권1호
• /
• pp.1-9
• /
• 2001

The recent spread of scaled telemanipulation into microsurgery and the nano-world increasingly requires the identification of the possible operation region as a main system specification. A teleoperation system is a complex cascaded system since the human operator, master, slave, and communication are involved bilaterally. Hence, a small time delay inside a master and slave system can be critical to the overall system stability even without communication time delay. In this paper we derive an upper bound of the scaling product of position and force by using Llewellyns unconditional stability. This bound can be used for checking the validity of the designed bilateral controller. Time delay from the sample and hold of computer control and its effects on stability of scaled teleoperation are modeled and simulated based on the transfer function of the teleoperation system. The feasible operation region in terms of position and force scaling decreases sharply as the sampling rate decreases and time delays inside the master and slave increase.