• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.83-84
• /
• 2009

Thin film solar cells based on CIGS continue to be a leading candidate for thin film photovoltaic devices due to their appropriate bandgap, long-term stability, and low-cost production. To date, the most successful technique for the deposition of a CIGS absorber layer has been based on the co-evaporation However, the evaporation process is difficult to scale-up for large-area manufacturing the sputtering and Selenizaton process has been a promising method for low-cost and large-scale production of high quality CIGS In this study, we have used Cu and CuIn alloy targets for precursor deposition the precursor deposited by sputtering Cu and CuIn targets and $CuInSe_2$ thin film is manufactured by Selenization process

• 방사성폐기물학회지
• /
• 제6권3호
• /
• pp.233-244
• /
• 2008

본 연구에서는 경수로 사용후핵연료로부터 핵연료 물질(예: 차세대형 원자로의 연료)로 재사용할 수 있는 우라늄과 초우라늄원소군(TRU)을 분리, 회수하기 위한 파이로 처리공정(pyroprocess) 시설의 개념설계연구를 수행하였다. 이 시설의 목적은 공학적 실증시험을 통하여 상용 규모의 확대(scale-up) 자료를 확보하는 것과 운전 경험을 쌓을 수 있도록 하자는 것이고 그 용량은 비교적 작은 공학적 규모인 20 kg HM/batch 로 설정하였다. 처리 대상 핵연료로는 경수로의 전형적인 핵연료 형태인 3.5 % 농축우라늄, 35,000 MWd/tU 그리고 5년 냉각시킨 경수로 사용후핵연료를 선택하였다. 본 개념설계연구에서 고려한 주요 항목은 차폐셀을 포함한 파이로 처리공정 시설의 배치, 공정 운전에 대비한 시설 안전 관리, 방사선 안전, 차폐셀 내 불활성 분위기 관리, 연료 물질의 계량 관리, TRU 제품의 핵임계 관리 등이다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.194-198
• /
• 2004

The thermo-hydro-mechanical (T-H-M) process is one of major issues in the performance assessment of a high level waste (HLW) repository. An engineering-scale test was planned and its experimental set-up has being installed, to validate the T-H-M behavior in the buffer of a reference disposal system. The experimental set-up consists of 4 major components: the confining cylinder with its hydration water tank, the bentonite block, the heating system, and the sensors and instruments. The monitoring and data acquisition system is employed to control the heater to maintain the temperature of $95^{\circ}C$ at the interface of the heater and bentonite blocks and to collect signals from sensors and instruments installed in the bentonite blocks.

• 대한방사선치료학회지
• /
• 제16권1호
• /
• pp.11-19
• /
• 2004

서론 및 목적 : 세기변조 방사선치료와 전신 정위적 방사선치료에서 5mm이내의 위치 정확성확인 (L-gram)은 환자치료 목적 달성을 위한 중요한 QA과정의 하나이다. 이에 본원에서 제작한 scale point를 이용하여 L-gram 영상을 얻어 환자치료의 정확성을 향상시키고자 한다. 대상 및 방법 : 본원의 MLC 부착장비인 CL2100C/D, CL21EX에서 치료중인 IMRT, SRS환자를 대상으로 기존의 상품화된 port film graticule과 본원에서 제작한 MLC scale pointer를 비교 분석하였다. 결과 : MLC를 이용한 scale pointer는 beam의 확산까지 고려한 정확한 위치를 나타내었고 MLC의 교차로 생기는 pixel 모양의 형성을 통해 어떠한 위치에서도 정확한 확인이 가능했다. 결론 및 고찰 : L-gram 확인시 약간의 시간적 투자($1{\sim}2$분)로서 정확한 위치를 나타냄으로서 L-gram 확인시간 단축과 치료부위의 정확한 위치 확인을 할 수 있었다.

• 한국생물물리학회:학술대회논문집
• /
• 한국생물물리학회 2003년도 정기총회 및 학술발표회
• /
• pp.65-65
• /
• 2003

After many genome projects, algorithms and software to process explosively growing biological information have been developed. To process huge amount of biological information, high performance computing equipments are essential. If we use the remote resources such as computing power, storages etc., through a Grid to share the resources in the Internet environment, we will be able to obtain great efficiency to process data at a low cost. Here we present the performance improvement of the protein secondary structure prediction (PSIPred) by using the Grid platform, distributing protein sequence data on the Grid where each computer node analyzes its own part of protein sequence data to speed up the structure prediction. On the Grid, genome scale secondary structure prediction for Mycoplasma genitalium, Escherichia coli, Helicobacter pylori, Saccharomyces cerevisiae and Caenorhabditis slogans were performed and analyzed by a statistical way to show the protein structural deviation and comparison between the genomes. Experimental results show that the Grid is a viable platform to speed up the protein structure prediction and from the predicted structures.

• Educational Technology International
• /
• 제9권2호
• /
• pp.1-15
• /
• 2008

One of the challenges that online learners face is feeling of isolation and diminishing desire of maintaining active participation during e-learning. Social presence, that is considered to be a vital factor in e-learning, is recently started to receive a support from the field. Although research indicated a significant role of social presence in both learning process and learning outcome, there is no widely accepted measurement scale of social presence. This study, therefore, developed a new scale to measure social presence based on the existing theories and validated it against 723 participants. Nineteen self-report items with three dimensions, co-presence, influence, and cohesiveness, were identified and validated using Exploratory Factor Analysis (EFA) in a preliminary and a follow-up study.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2536-2539
• /
• 2008

A study has been made on how to occur inertial oscillations in a rotating flow. The flow is considered to be induced by differentially-rotating top and bottom disks with infinite radius. The top and bottom disks are assumed to be set in motion over a finite initial start-up time duration from initial solid body rotation ($\Omega$) to each finial state, i.e., the top disk is rotating at the angular velocity (${\Omega}+{\Delta}{\Omega}$) and the bottom disk (${\Omega}-{\Delta}{\Omega}$). The system Reynolds number, which is a reciprocal of conventional Ekman number in rotating flows, is very high so that a boundary layer flow near disks is pronounced. From a strict theoretical analysis, it is clearly found the fact that inertial oscillation in a rotating flow is caused by excessive input of torque during start-up phase. Above finding comes from the following physics of theoretical result: in the case of abrupt start-up within very shorter time-duration than spin-up time scale, the inertial oscillation is magnified but it could be completely depressed in the case of mildly accelerated start-up, i.e., start-up process being established over diffusion time scale.

• 자원리싸이클링
• /
• 제18권2호
• /
• pp.30-38
• /
• 2009

습식 비중선별에서 sink products로 회수된 종말품 고비중 폐플라스틱 산물의 재활용을 위한 마찰하전정전선별 실증화 연구를 수행하였다. 종말품 고비중 폐플라스틱의 재질분리에 있어 적합한 하전물질 선정을 위한 하전특성 연구결과, high density polyethylene (HDPE)재질이 가장 효과적인 하전물질로 규명되어, 이 재질을 이용하여 하전장치를 제작하였다. 실험결과 최적조건인 전극의 전기장 250 kV/m, 분리대의 위치 (-) 8 cm, 그리고 상대습도 40%이하에서 PET, PS and others 산물의 품위와 회수율이 각각 99.1%와 86.0%인 결과를 얻었다. 또한 300 kg/h 규모의 대량처리 기술을 개발하여 종말품 폐플라스틱을 2등급 이상의 RPF나 RDF로 재활용할 수 있는 즉, PVC를 1% 미만을 줄일 수 있는 선별기술을 개발하였다.

• 상하수도학회지
• /
• 제29권3호
• /
• pp.359-370
• /
• 2015

This study developed an up-flow wetland providing either an eco-friendly follow-up process of medium-sized public treatment facility for livestock manure or a non-point source pollution controller near livestock farms. The four bench-scale up-flow wetlands were operated with four different bed media sets. The removal efficiencies of the wetland effluent for CODCr, TN, TP, SS were 35.2 %, 29.5 %, 31.2 % and 52.2 % for set 1(Blank, without reed, with bio-ceramic), 40.6 %, 43.4 %, 42.2 % and 55.4 % for set 2(with bio-reed & without bio-ceramic), 45.2 %, 48.7 %, 46.6 % and 66.3 % for set 3(with bio-reed & bio-ceramic), 32.9 %, 27.3 %, 29.3 % and 54.1 % for Set 4(with reed & bio ceramic), respectively. The set 3 condition having a mixture of bio-reed and bio-ceramic showed the highest efficiency in the bench-scale evaluation. This study suggests a mixture of bio-reed and bio-ceramic as suitable bed media in the construction of artificial wetlands near livestock farms. Soils including the bed media were monitored during the evaluation for trace elements. Soil analysis results were satisfied with the Korean Soil Contamination Standard. This study showed that the up-flow constructed wetland was feasible to treat the effluent livestock wastewater treatment facility.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2407-2409
• /
• 2005

As the cumulative amount of spent fuel increases, the reliable and effective management of the spent fuel has become a world-wide mission. For this mission, KAERI is developing the Advanced Spent Fuel Conditioning Process (ACP) as a pre-disposal treatment process for spent fuel. Conventional approach to the development of the process and the remote operation technology is to fabricate the process equipment on the same scale as the real environment and demonstrate the remote handling operation using simulated fuel called a mock-up test. But this mock-up test is expensive and time consuming, since the design may need to be modified and the equipment fabricated again to account for the problems found during a testing. To deal with this problem, we developed a digital mockup for the ACP. Also, for an effective utilization of the digital mockup, we developed user interface modules such as the data acquisition and display module and the external input device interface module. The result of this implementation shows that a continuous motion of the manipulator using the external device interface can be represented easily and the information display screens responded well to the simulation situation.