• 우주기술과 응용
• /
• 제4권1호
• /
• pp.12-26
• /
• 2024

Attitude control of a satellite is very important to ensure proper for mission performance. Satellites launched in the past had simple missions. However, recently, with the advancement of technology, the tasks to be performed have become more complex. One example relies on a new technology that allows satellites quickly alter their attitude while orbiting in space. Currently, one of the most widely used technologies for satellite attitude control is the reaction wheel. However, the amount of torque generated by reaction wheels is too low to facilitate quick maneuvers by the satellite. One way to overcome this is to implement posture control logic using a control moment gyroscope (CMG). Various types of CMGs have been applied to space systems, and CMGs are currently mounted on large-scale satellites. However, although technological advancements have continued, the market for CMGs applicable to, small satellites remains in its early stages. An ultra-small CMG was developed for use with small satellites weighing less than 200 kg. The ultra-small CMG measured its target performance outcomes using a precision torque-measuring device. The target performance of the CMG, at 800 mNm, was set through an analysis. The final torque of the CMG produced through the design after the analysis was 821mNm, meaning that a target tolerance level of 10% was achieved.

• 한국실내디자인학회논문집
• /
• 제16호
• /
• pp.142-152
• /
• 1998

As a rapid supply of a culture facility the change of living style bring on needs about storage space in the residence space. This study choose Hong Je Dong-Byuk San 4 type apartment house which was built in 1990 as research target and we selected 4type of a total 12house and we choose LDK as a research target that is high in a requirement and utilization other space is excluded in this study. We can expect that the apartment house will be differed with area of living space of apartment house in the requirement of storage space. Small apartment house is requried various storage planning because of confined living space But big apartment houses required storage planning of simple type because it have already storage space. So we have to do efficiency storage planning because of limited space in the apartment house. Base on this results we will show storage space according to the type of pyeong. So this study show proper storage type according to the scale of apartment house,.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2012년도 춘계학술대회
• /
• pp.573-575
• /
• 2012

기존 RADAR 기반의 VTS에 AIS를 연계 집약하면서 예측 불가능한 데이터 전송률에도 동일선박으로부터의 AIS 및 RADAR 데이터는 상관관계를 유지하면서 물표에 대한 Tracking이 지속적으로 이루어져야 하지만 AIS 신호 Lost시 RADAR Tracking 자동 전환이 안 되는 경우가 많이 발생하고 있다. 또한 3개의 VTS 모니터 화면에 각각 다른 Scale과 다른 관제구역이 디스플레이 됨으로써 특히 모니터 가장자리 부근의 관제구역은 사각지대로 관제사의 집중도가 떨어질 수밖에 없다. 이러한 문제점들은 관제사의 Traffic Image구성 및 Situational Awareness를 방해하는 요소로 작용하며 사고의 개연성을 높이고 있다. 본 연구에서는 VTS 모니터상의 화면 재구성 방법을 통해서 관제사의 SA를 돕고, AIS-RADAR Tracking 알고리즘 보완을 통한 Target Tracking의 안정성을 확보하고, 교육 훈련을 통해서 AIS특성과 Error현상에 대한 관제사들이 충분히 이해하도록 하여 관제업무의 향상을 기하는 방안을 제시하였다.

• 전기학회논문지P
• /
• 제64권3호
• /
• pp.187-192
• /
• 2015

Detecting human in images is a challenging task owing to their variable appearance and the wide range of poses the they can adopt. The first need is a robust feature set that allows the human form to be discriminated cleanly, even in cluttered background under difficult illumination. A large number of vision application rely on matching keypoints across images. These days, the deployment of vision algorithms on smart phones and embedded device with low memory and computation complexity has even upped the ante: the goal is to make descriptors faster compute, more compact while remaining robust scale, rotation and noise. In this paper we focus on improving the speed of pedestrian(walking person) detection using Histogram of Oriented Gradient(HOG) descriptors provide excellent performance and tracking using kalman filter.

• 영어어문교육
• /
• 제13권4호
• /
• pp.167-192
• /
• 2007

This study investigates the effects of written vocabulary exercises on lexical knowledge. Korean university students learning English as a foreign language were randomly assigned to one of four conditions-Condition 1 (having students match word form with word meaning), Condition 2 (having students fill in the blank provided with a list of words), Condition 3 (having students write sentences with the target words), Condition 4 (having students do three practices with the same vocabulary exercise as the condition 1). Each type of exercises in Condition 1, 2, and 3 was designed to classify a different level of mental processing except Condition 4 with multiple encounters of the target words. Learners' vocabulary knowledge of this study was obtained using a format adopted from the Vocabulary Knowledge Scale (VKS) immediately and two weeks later. The findings indicated that: (1) Condition 4 having students do three matching vocabulary exercises was as effective as the condition 3 (one writing exercise) on the immediate learning of word; (2) although there was no significant difference of the effect of vocabulary exercises between Condition 3 and 4, Condition 4 asking students to do three matching vocabulary exercises was the most effective way of vocabulary retention after two weeks.

• 수산해양교육연구
• /
• 제20권3호
• /
• pp.508-519
• /
• 2008

Hot air drying is a method that let moistures evaporate by heat exchange between heating air and dry target. This way is dominating more than about 70% of dryers that the use extent is wide fairly, and is established in domestic than dryer that use conduction or radiation etc. Most of research about drying had been emphasized in size of device through analysis for these dry phenomenon plain, heating topology, and aspect of form and so on by dry target's special quality, and research about device development or waste heat withdrawal technology in energy utilization efficiency side is slight real condition. Therefore, in this study, Investigated numerically about thermal efficiency elevation that is leaned against as that change the temperature of inlet and outlet in heat exchanger of the hot air drying tower.

• 한국공간구조학회논문집
• /
• 제3권3호
• /
• pp.67-74
• /
• 2003

The purpose of this study is to improve convergence speed of topology optimization procedure using the existing ESO method and to deal with topology decision of the truss structures according to a boundary condition, such as cantilever type. At the existing ESO topology optimization procedure for the truss structures, the adjustment of member sizes according to target stress has been executed by increasing or reducing a very small value from each member size. In this case, it takes too much iteration till convergence. Accordingly, it is practically hard to obtain optimum topology for a large scale structures. For that reason, it is necessary to improve convergence speed of ESO method more effectively. During the topology decision procedure, member sizes are adjusted by calculating approximate solution for member sizes corresponding to the target stress at every step, the new member sizes are adjusted by such method are applied in FEA procedure of next step.

• 말소리와 음성과학
• /
• 제3권3호
• /
• pp.91-98
• /
• 2011

In this paper, a multi-channel speech enhancement method using the linearly constrained minimum variance (LCMV) algorithm and a variable learning rate control is proposed. To control the learning rate for adaptive filters of the LCMV algorithm, the direction of arrival (DOA) is measured for each short-time input signal and the likelihood function of the target speech presence is estimated to control the filter learning rate. Using the likelihood measure, the learning rate is increased during the pure noise interval and decreased during the target speech interval. To optimize the parameter of the mapping function between the likelihood value and the corresponding learning rate, an exhaustive search is performed using the Bark's scale distortion (BSD) as the performance index. Experimental results show that the proposed algorithm outperforms the conventional LCMV with fixed learning rate in the BSD by around 1.5 dB.

• Journal of the Optical Society of Korea
• /
• 제14권1호
• /
• pp.1-13
• /
• 2010

This paper describes a development of a fiber optic common-path optical coherence tomography (OCT) based imaging and guided system that possess ability to reliably identify optically transparent targets that are on the micron scale; ability to maintain a precise and safe position from the target; ability to provide spectroscopic imaging; ability to imaging biological target in 3-D. The system is based on a high resolution fiber optic Common-Path OCT (CP-OCT) that can be integrated into various mini-probes and tools. The system is capable of obtaining >70K A-scan per second with a resolution better than $3\;{\mu}m$. We have demonstrated that the system is capable of one-dimensional real-time depth tracking, tool motion limiting and motion compensation, oxygen-saturation level imaging, and high resolution 3-D images for various biomedical applications.

• International Journal of Aerospace System Engineering
• /
• 제8권2호
• /
• pp.1-3
• /
• 2021

This study proposed a specific preliminary structural design procedure of the main wing for a small scale WIG vehicle to meet the target weight of the system requirement. The high stiffness and strength Carbon-Epoxy material was used for lightness, and the foam sandwich type structure at the upper skin and the spar webs was adopted for improvement of structural stability. After structural design, wing joint part was designed. Through investigation on structural design result, design modification was performed. After design modification, even thought the designed wing weight was a little bit heavier than the target wing weight, the structural safety and stability of the final design feature was confirmed.