• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.63-72
• /
• 2012

In contemporary times, "environmental designers" need to consider both exterior and interior aspects because of the growing trend in dissolution between exterior and interior spaces. To quantify "spatial sense" which serves as the standard for environmental design, this study has asked 63 subjects to evaluate 15 interior and 14 exterior spaces. The "spaciousness (small-large)", "openness(closed-open)", "warmness(warm-cold)", "brightness(bright-dark)", "softness(soft-hard)", "spatial intimacy" and "frequency of visit" were adopted as variables of spatial sense. Through the analysis of these variables, this study could gain the difference between spatial sense for exterior and interior environments, quantify the spatial sense that physically and psychologically appropriates to human beings. The result of this study can be summarized as follows: Twice the amount of spaciousness was observed between the interior and exterior spaces. And the standard on intimate space is established with W/H ratio of 5.71 and high Window/Wall Area ratio in the interior and an area of 3,800m2 and a W/H ratio of 5.57 in exterior. The difference between the spatial sense in the interior and exterior space is mostly dependent on the psychological sense. The increase of physical size caused by the interior space to be perceived as cold, dark and hard psychologically, but exterior space to be perceived as warm, bright and soft. Psychological senses, especially softness, affect spatial intimacy to the greatest extent among the given variables. As the psychological senses for interior spaces were largely independent from the given space's size and perceptive senses, the size of the interior space, which exhibited spatial intimacy, could not be deduced. In comparison to this, due to the high dependency between the psychological senses for exterior spaces and the given space's size and perceptive senses. The study also showed that interior and exterior spaces have relatively different spatial sense and physical standards. Such research results are predicted to provide applicable standards for environmental designers for exterior and interior spaces in the future.

• Journal of agricultural medicine and community health
• /
• v.15 no.2
• /
• pp.97-106
• /
• 1990

1. Background Women's health and their involvement in health care are essential to health for everyone. If they are ignorant, malnourished or over-worked, the health &-their families as well as their own health will suffer. Women's health depends on broad considerations beyond medicine. Among other things, it depends upon their work in farming. their subordination to their families, their accepted roles, and poor hygiene with poorly equipped housing and environmental sanitation. 2. Objectives and Contents a. The health status of rural women : physical and mental complaints, experience of pesticides intoxication, Farmer's syndrome, experiences of reproductive health problems. b. participation in and attitudes towards housework and farming c. accessibility of medical care d. status of maternal health : fertility, family planning practice. induced abortion, and maternal care 3. Research method A nationwide field survey, based on stratified random sampling, was conducted during July, 1986. Revised Cornell Medical index(68 out of 195 items). Kawagai's Farmers Syndrome Scale, and self-developed structured questionnaires were used to rural farming wives(n=2.028). aged between 26-55. 4. Characteristics of the respondents mean age : 40.2 marital status : 90.8% married mean no. of household : 4.9 average years of education : 4.7 yrs. average income of household : \235,000 average years of residence in rural area : 36.4 yrs average Working hours(household and farming) : 11 hrs. 23 min 5. Health Status of rural women a. The average number of physical and mental symptoms were 12.4, 4.7, and the rate of complaints were 22.1%, 38.8% each. revealing complaints of mental symptomes higher than physical ones. b. 65.4% of rural women complained of more than 4 symptoms out of 9, indicating farmer's syndrome. 11.9 % experienced pesticide overdue syndrome c. 57.6% of respondents experienced women-specific health problems. d. Age and education of respondents were the variables which affect on the level of their health 6. Utilization of medical services a. The number of symptoms and complaints of respondents were dependent on the distance to where the health-care service is given b. Drug store was the most commonly utilized due to low price and the distance to reach. while nurse practitioners were well utilized when there were nurse practitioner's office in their villages. c. Rural women were internalized their subordination to husbands and children, revealing they are positive(93%) in health-care demand for-them but negative(30%) for themselves d. 33.0% of respondents were habitual drug users, 4.5% were smokers and 32.3% were alcohol drinkers. and 86.3% experienced induced-abortion. But most of them(77.6%) knew that those had negative effects on health. 7. Maternal Health Care a. Practice rate of contraception was 48.1% : female users were 90.9% in permanent and 89.6% in temporary contraception b. Induced abortions were taken mostly at hospital(86.3%), while health centers(4.7%), midwiferies(4.3%). and others(4.5%) including drug stores were listed a few. The repeated numbers of induced abortion seemed affected on the increasing numbers of symptoms and complaints. c. The first pre-natal check-up during first trimester was 41.8%, safe delivery rate was 15.6%, post-natal check-up during two months after delivery. Rural women had no enough rest after delivery revealing average days of rest from home work and farming 8.3 and 17.2. d. 86.6% practised breast feeding, showing younger and more educated mothers depending on artificial milk 8. Recommendations a. To lessen the multiple role over burden housing and sanitary conditions should be improved, and are needed farming machiner es for women and training on the use of them b. Health education should begin at primary school including health behavior and living environment. c. Women should be encouraged to become policy-makers as well as administrators in the field of women specific health affairs. d. Women's health indicators should be developed and women's health surveillance system too.

• Journal of Preventive Medicine and Public Health
• /
• v.25 no.3 s.39
• /
• pp.312-329
• /
• 1992

The purpose of this study is to estimate cesarean section rate in Korea and analyze the socioeconomic variables and health resources which affect regional variation in the rate. Samples were drawn from the record of vaginal and cesarean section deliveries based upon insurance claim bills which have been submitted to the National Federation of Medical Insurance for the first three months, January through March, 1991. The results are obtained as follows : It was found that. cesarean section rate was increasing rapidly up to 23.1% in 1991. Cesarean section per 10 thousand insured people was 4.8 and the number of cesarean section per 10 thousand insured eligible($15{\sim}49$ years old) female was 7.6. The fee for normal delivery was 109,489 won and that for cesarean section was 390,024 won. The average days of hospitalization in normal delivery was 2.3 days, and those in cesarean section was 7.6 days. On the average cesarean section has a longer of stay as much as by 4.3 days and cost 3.6 times more than normal deliveries. Cesarean section rates vary among medical facilities 19.8% at clinics 37.6% in small-scale hospitals, and 29.1% in general hospitals. The regional variation of cesarean section rates was also fairly prominent. The South Cheju Gun has the highest rate of cesarean section, 56.2%. Meanwhile no cesarean section cases has been reported in Sunchang Gun during the period of this study. The variation is noted among provinces. The rate for Cheju province has been 3.4 times higher than that for Chunnam. The number of cesarean section per 10 thousand insured people vary greatly among regions, too. This study has found that there exists significant regional variations among various geographic units in terms of average length of stay, average cost, number of obsretricians and number of beds. Multiple regression analysis was done to identify factors explaining the regional variance of various cesarean section rates : In the urban areas, no significant explaining variables were noted except the number of beds for the dependent variable of cesarean section cases per 10 thousand insured eligible females. The smaller the number of bed, the more cases of cesarean section was noted for an urban area. The is mostly because the rate of cesarean section is higher in medium-size hospitals than in large general hospitals. In the rural areas, the factor of education has been found significant for all three deplendent variables. The higher the educational level, the rate of cesarean section is most likely to rise. An income variable measured by the amount of monthly insurance contribution has been identified a powerful predictor in explaining the valiance of cesarean section rates. The same has been noted for the number of obstetricians. Similar findings are observed for the country as a whole. The income level has veen found as the most powerful explaining factor in the regional variance of cesarean section rates. In general the rate is higher in the urban areas, and lower in the area with more small hospitals. As this is the initial attempt to identify the factors relevant to the regional difference in the rates of cesarean section, more elaborated study is urgently required.

• KDI Journal of Economic Policy
• /
• v.12 no.2
• /
• pp.51-79
• /
• 1990

Research on technical efficiency, an important dimension of market performance, had received little attention until recently by most industrial organization empiricists, the reason being that traditional microeconomic theory simply assumed away any form of inefficiency in production. Recently, however, an increasing number of research efforts have been conducted to answer questions such as: To what extent do technical ineffciencies exist in the production activities of firms and plants? What are the factors accounting for the level of inefficiency found and those explaining the interindustry difference in technical inefficiency? Are there any significant international differences in the levels of technical efficiency and, if so, how can we reconcile these results with the observed pattern of international trade, etc? As the first in a series of studies on the technical efficiency of Korea's manufacturing industries, this paper attempts to answer some of these questions. Since the estimation of technical efficiency requires the use of plant-level data for each of the five-digit KSIC industries available from the Census of Manufactures, one may consture the findings of this paper as empirical evidence of technical efficiency in Korea's manufacturing industries at the most disaggregated level. We start by clarifying the relationship among the various concepts of efficiency-allocative effciency, factor-price efficiency, technical efficiency, Leibenstein's X-efficiency, and scale efficiency. It then becomes clear that unless certain ceteris paribus assumptions are satisfied, our estimates of technical inefficiency are in fact related to factor price inefficiency as well. The empirical model employed is, what is called, a stochastic frontier production function which divides the stochastic term into two different components-one with a symmetric distribution for pure white noise and the other for technical inefficiency with an asymmetric distribution. A translog production function is assumed for the functional relationship between inputs and output, and was estimated by the corrected ordinary least squares method. The second and third sample moments of the regression residuals are then used to yield estimates of four different types of measures for technical (in) efficiency. The entire range of manufacturing industries can be divided into two groups, depending on whether or not the distribution of estimated regression residuals allows a successful estimation of technical efficiency. The regression equation employing value added as the dependent variable gives a greater number of "successful" industries than the one using gross output. The correlation among estimates of the different measures of efficiency appears to be high, while the estimates of efficiency based on different regression equations seem almost uncorrelated. Thus, in the subsequent analysis of the determinants of interindustry variations in technical efficiency, the choice of the regression equation in the previous stage will affect the outcome significantly.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.2
• /
• pp.109-120
• /
• 2017

A discounted cost model for preventive maintenance of armor units of rubble-mound breakwaters is mathematically derived by combining the deterioration model based on a discrete-time stochastic process of shock occurrence with the cost model of renewal process together. The discounted cost model of condition-based maintenance proposed in this paper can take into account the nonlinearity of cumulative damage process as well as the discounting effect of cost. By comparing the present results with the previous other results, the verification is carried out satisfactorily. In addition, it is known from the sensitivity analysis on variables related to the model that the more often preventive maintenance should be implemented, the more crucial the level of importance of system is. However, the tendency is shown in reverse as the interest rate is increased. Meanwhile, the present model has been applied to the armor units of rubble-mound breakwaters. The parameters of damage intensity function have been estimated through the time-dependent prediction of the expected cumulative damage level obtained from the sample path method. In particular, it is confirmed that the shock occurrences can be considered to be a discrete-time stochastic process by investigating the effects of uncertainty of the shock occurrences on the expected cumulative damage level with homogeneous Poisson process and doubly stochastic Poisson process that are the continuous-time stochastic processes. It can be also seen that the stochastic process of cumulative damage would depend directly on the design conditions, thus the preventive maintenance would be varied due to those. Finally, the optimal periods and scale for the preventive maintenance of armor units of rubble-mound breakwaters can be quantitatively determined with the failure limits, the levels of importance of structure, and the interest rates.

• 한국노년학
• /
• v.37 no.1
• /
• pp.237-250
• /
• 2017

The purpose of this study is to analyze the effects of exercise program for prevention of falling on physical fitness, posture and fall prevention self-efficacy for elderly women. 30 females above the age of 65 were subjects for this study. Over an twelve week period, 14women in the experimental group performed exercise 2 times a week for 60 minutes per session. 16women in the control group didn't participate in the exercise program. The independent variable was a exercise program for prevention of falling. Dependent variables were physical fitness, posture and fall prevention self-efficacy. Prevention of falling exercise program is consisted of an elastic band using exercise and Korean dance movement exercise. Physical fitness consisted of grip strength, upper and lower body endurance, cardiovascular endurance, flexibility, balance, coordination. The posture was measured the static posture when standing, using a high-resolution camera, body style to automatically measure the distance and angle(M-zen, Korea). Posture was measured in both the coronal and sagittal plane via reference board. Fall prevention self-efficacy was measured via questionnaire using the Korea Falls Self-Efficacy Scale (FES-K). The physical fitness, posture and fall prevention self-efficacy were measured twice with pre and post exercise, and the difference between groups with Wilcox signed rank test, and the group-specific post verification was carried out with U-validated methods (Mann Whitney U test). Statistical significance level was verified by setting the p<.05. Lower body endurance, cardiovascular endurance, flexibility, balance and coordination significantly increased in the experimental group. The control group was no significant increase in physical fitness variables. shoulder slope angle, pelvic slope angle(coronal/sagittal), leg length difference, scapular inferior angle and left/right calcaneus angle significantly decreased in the experimental group. Both the experimental group and control group were no significant increase in fall prevention self efficacy. The prevention of falling exercise program for elderly women indicated the positive changes in physical fitness(except grip strength) and posture(except upper body slope). However, there are no significant differences of falling prevention self-efficacy between the both group. Thus, the prevention of falling exercise program for the elderly has been proved that it is highly efficient on improving physical fitness and posture proofreading. However, we still need to consider supplement exercise for grip strength and upper body slope.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.21-36
• /
• 2019

Dead fuel moisture content is a key variable in fire danger rating as it affects fire ignition and behavior. This study evaluates simple regression models estimating the moisture content of standardized 10-h fuel stick (10-h FMC) at three sites with different characteristics(urban and outside/inside the forest). Equilibrium moisture content (EMC) was used as an independent variable, and in-situ measured 10-h FMC was used as a dependent variable and validation data. 10-h FMC spatial distribution maps were created for dates with the most frequent fire occurrence during 2013-2018. Also, 10-h FMC values of the dates were analyzed to investigate under which 10-h FMC condition forest fire is likely to occur. As the results, fitted equations could explain considerable part of the variance in 10-h FMC (62~78%). Compared to the validation data, the models performed well with R2 ranged from 0.53 to 0.68, root mean squared error (RMSE) ranged from 2.52% to 3.43%, and bias ranged from -0.41% to 1.10%. When the 10-h FMC model fitted for one site was applied to the other sites, $R^2$ was maintained as the same while RMSE and bias increased up to 5.13% and 3.68%, respectively. The major deficiency of the 10-h FMC model was that it poorly caught the difference in the drying process after rainfall between 10-h FMC and EMC. From the analysis of 10-h FMC during the dates fire occurred, more than 70% of the fires occurred under a 10-h FMC condition of less than 10.5%. Overall, the present study suggested a simple model estimating 10-h FMC with acceptable performance. Applying the 10-h FMC model to the automatic mountain weather observation system was successfully tested to produce a national-scale 10-h FMC spatial distribution map. This data will be fundamental information for forest fire research, and will support the policy maker.

• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.194-201
• /
• 2021

Induced polarization (IP) effect is known to be caused by electrochemical phenomena at interface between minerals and pore water. Spectral induced polarization (SIP) method is an electrical survey to localize subsurface IP anomalies while injecting alternating currents of multiple frequencies into the ground. This method was effectively applied to mineral exploration of various ore deposits. Titanomagnetite ores were being produced by a mining company located in Gonamsan area, Gwanin-myeon, Pocheon-si, Gyeonggi-do, South Korea. Because the ores contain more than 0.4 w% vanadium, the ore deposit is called as Gwanin vanadiferous titanomagnetite (VTM) deposit. The vanadium is the most important of materials in production of vanadium redox flow batteries, which can be appropriately used for large-scale energy storage system. Systematic mineral exploration was conducted to identify presence of hidden VTM orebodies and estimate their potential resources. In geophysical exploration, laboratory geophysical measurement of rock samples is helpful to generate reliable property models from field survey data. Therefore, we performed laboratory SIP data of the rocks from the Gwanin VTM deposit to understand SIP characteristics between ores and host rocks and then demonstrate the applicability of this method for the mineral exploration. Both phase and resistivity spectra of the ores sampled from underground outcrop and drilling cores were different of those of the host rocks consisting of monzodiorite and quartz monzodiorite. Because the phase and resistivity at frequencies below 100 Hz are mainly dependent on the SIP characteristics of the rocks, we calculated mean values of the ores and the host rocks. The average phase values at 0.1 Hz were ores: -369 mrad and host rocks: -39 mrad. The average resistivity values at 0.1 Hz were ores: 16 Ωm and host rocks: 2,623 Ωm. Because the SIP characteristics of the ores were different of those of the host rocks, we considered that the SIP survey is effective for the mineral exploration in vanadiferous titanomagnetite deposits and the SIP characteristics are useful for interpreting field survey data.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.2
• /
• pp.63-77
• /
• 2022

Our aim was to reduce estimation errors of a wind velocity model used as an early warning system for weather risk management in the agricultural sector. The Rural Development Administration (RDA) agricultural weather observation network's wind velocity data and its corresponding estimated data from January to December 2020 were used to calculate linear regression equations (Y = aX + b). In each linear regression, the wind estimation error at 87 points and eight time slots per day (00:00, 03:00, 06:00, 09.00, 12.00, 15.00, 18.00, and 21:00) is the dependent variable (Y), while the estimated wind velocity is the independent variable (X). When the correlation coefficient exceeded 0.5, the regression equation was used as the wind velocity correction equation. In contrast, when the correlation coefficient was less than 0.5, the mean error (ME) at the corresponding points and time slots was substituted as the correction value instead of the regression equation. To enable the use of wind velocity model at a national scale, a distribution map with a grid resolution of 250 m was created. This objective was achieved b y performing a spatial interpolation with an inverse distance weighted (IDW) technique using the regression coefficients (a and b), the correlation coefficient (R), and the ME values for the 87 points and eight time slots. Interpolated grid values for 13 weather observation points in rural areas were then extracted. The wind velocity estimation errors for 13 points from January to December 2019 were corrected and compared with the system's values. After correction, the mean ME of the wind velocities reduced from 0.68 m/s to 0.45 m/s, while the mean RMSE reduced from 1.30 m/s to 1.05 m/s. In conclusion, the system's wind velocities were overestimated across all time slots; however, after the correction model was applied, the overestimation reduced in all time slots, except for 15:00. The ME and RMSE improved b y 33% and 19.2%, respectively. In our system, the warning for wind damage risk to crops is driven by the daily maximum wind speed derived from the daily mean wind speed obtained eight times per day. This approach is expected to reduce false alarms within the context of strong wind risk, by reducing the overestimation of wind velocities.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.105-119
• /
• 2023

Water supply is decreasing due to climate change, and coastal and island regions are highly dependent on groundwater, reducing the amount of available water. For sustainable water supply in coastal and island regions, it is necessary to accurately diagnose the current condition and efficiently distribute and manage water. For a precise analysis of the groundwater flow in the coastal island region, submarine fresh groundwater discharge was calculated for the Seongsan basin in the eastern part of Jeju Island. Two methods were used to estimate the thickness of the fresh groundwater. One method employed vertical interpolation of measured electrical conductivity in a multi depth monitoring well; the other used theoretical Ghyben-Herzberg ratio. The value using the Ghyben-Herzberg ratio makes it impossible to accurately estimate the changing salt-saltwater interface, and the value analyzed by electrical conductivity can represent the current state of the freshwater-saltwater interface. Observed parameter was distributed on a virtual grid. The average of submarine fresh groundwater discharge fluxes for the virtual grid was determined as the watershed's representative flux. The submarine fresh groundwater discharge and flux distribution by year were also calculated at the basin scale. The method using electrical conductivity estimated the submarine fresh groundwater discharge from 2018 to 2020 to be 6.27 × 10⁶ m³/year; the method using the Ghyben-Herzberg ratio estimated a discharge of 10.87 × 10⁶ m³/year. The results presented in this study can be used as basis data for policies that determine sustainable water supply by using precise water budget analysis in coastal and island areas.