• Journal of The Korea Institute of Healthcare Architecture
• /
• v.16 no.2
• /
• pp.65-75
• /
• 2010

Space transformation of hospital architecture happens more rapidly than other types such as school and office buildings. This requirement is caused by medical demand, service transformation, technical development and equipment changes. Grand scale extension and rapid change in hospital architecture affects whole planning; therefore, it is important to design in the macro perspective such like Life Cycle. Grand scale extension is difficult process to rebuild growth and transfer of hospital architecture and to adapt to the future change. That's why simple planning gives limits to some departments in a short-term and brings another reform such as more extension or interior renovation in a long-term. This study surveys various space transformation and grand scale extension of EB hospital extended recently, and it is to find planning condition in extension.

• Journal of Cadastre & Land InformatiX
• /
• v.44 no.2
• /
• pp.139-153
• /
• 2014

The world geodetic system transformation of cadastral record have to minimize differences of boundary and area being in cadastral record according to transformation for that is direct connected with the land owner and property protection. However it is very difficult to accurately maintain the before and after transformation because coordinate transformation is generally using a mathematical conversion formula. At present, Helmert model by using 4-parameter is official coordinate transformation model for Cadastral Resurvey Project but scale factor is most sensitive to changes of area and relative position in the same parcel. In this study, it was proposed 3-parameter method using by scale factor fixing through the application of a Helmert in order to avoid changing the area difference and keeping the error within the tolerance range of the boundary which is related to the boundary point coordinate region.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.5
• /
• pp.401-414
• /
• 2013

Ginsenoside Rg3 (G-Rg3) contained only in red ginseng has been found to show various pharmacological effects such as an anticancer, antiangiogenetic, antimetastastic, liver protective, neuroprotective immunomodulating, vasorelaxative, antidiabetic, insulin secretion promoting and antioxidant activities. It is well known that G-Rg3 could be divided into 20(R)-Rg3 and 20(S)-Rg3 according to the hydroxyl group attached to C-20 of aglycone, whose structural characteristics show different pharmacological activities. It has been reported that G-Rg3 is metabolized to G-Rh2 and protopanaxadiol by the conditions of the gastric acid or intestinal bacteria, thereby these metabolites could be absorbed, suggesting its absolute bioavailability (2.63%) to be very low. Therefore, we reviewed the chemical, physical and biological transformation methods for the production on a large scale of G-Rg3 with various pharmacological effects. We also examined the influence of acid and heat treatment-induced potentials on for the preparation method of higher G-Rg3 content in ginseng and ginseng products. Futhermore, the microbial and enzymatic bio-conversion technologies could be more efficient in terms of high selectivity, efficiency and productivity. The present review discusses the available technologies for G-Rg3 production on a large scale using chemical and biological transformation.

• Corrosion Science and Technology
• /
• v.2 no.5
• /
• pp.225-232
• /
• 2003

High temperature oxidation of SUS430 and SUS304 stainless steels in 16.7 kPa $O_2$ - 20.3 kPa $H_2O$ - balanced N2 atmosphere at 1273 K was studied focused on the scale spalling during cooling after an isothermal oxidation. Spalling of the oxide scale during cooling occurred only for SUS304 stainless steel. The oxide scale was composed of two layers and they detached at the interface between them. The reason for the spalling could not be explained only by thermal stresses applied to the specimen during heating and cooling. A new mechanism for scale spalling was proposed based on combination of thermal stresses and thermal shock caused by a fast Martensite transformation of substrate metal.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.939-944
• /
• 1990

To recognize isomorphic transformation patterns, such as scale-change, translation and rotation transformed patterns, is an old difficult but interesting problem. Many researches have been done with a dominant approach of normalization by many eminent pioneers. However, there seems no a perfect system which can even recognize 90 .deg.-multiple rotation isomorphic transformation patterns for real needs. Here, as a new challenge, we propose a method of how to recognize 90 .deg.-multiple rotation isomorphic and symmetry isomorphic transformation patterns.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.373-378
• /
• 2003

This study deals with development of transformation tool for transformation of digital map coordinates systems using by the best fit transformation parameters which are determined between the local geodetic datum and geocentric datum (ITRF2000) in Korea and distortion modelling derived from collocation method. We used 107 control points as a common points. For analyzing the derived parameters, another 83 common points are tested. Finally, the best fit parameters are determined from Molodensky-Badekas model after considering the RMSE, maximum value, minimum values, and 95% confidence interval of residuals. after transformation of best fit parameters and distortion modelling, we could develop transformation tools with advenced accuracy. so it is possible to perform on transformation of digital map with scale 1:5,000. and we tested accuracy eveluation through analysis between transformation results and field results of GPS observation.

• The Journal of Internal Korean Medicine
• /
• v.37 no.5
• /
• pp.786-795
• /
• 2016

Objective: To evaluate the effectiveness of traditional Korean medicine treatment (TKM) on a patient with ACA infarction and hemorrhagic transformation with hemiplegia and urinary disturbance. Methods: A patient diagnosed with left anterior cerebral artery (ACA) infarction and hemorrhagic transformation was treated with electroacupuncture, moxibustion, and herbal medicine. Results: Improvements in the Manual Muscle Test (MMT), modified Barthel Index (MBI), National Institutes of Health Stroke Scale (NIHSS), modified Rankin scale (mRS), and K-MMSE were observed following the TKM treatment [MMT Gr. (3/0)→Gr. (4+/4+), MBI 20→89, NIHSS 8→2, mRS 5→1, MMSE-K 21→28]. Conclusion: TKM treatment could help improve the symptoms of patients with ACA infarction and hemorrhagic transformation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.9-16
• /
• 2018

Images with lower illumination from the light source or with dark regions due to shadows, etc., can improve subjective image quality by using retinex-based image enhancement schemes. The retinex theory is a method that recognizes the relative lightness of a scene, rather than recognizing the brightness of the scene. The way the human visual system recognizes a scene in a specific position can be in one of several methods: single-scale retinex, multi-scale retinex, and multi-scale retinex with color restoration (MSRCR). The proposed method is based on the MSRCR method, which includes a color restoration step, which consists of three phases. In the first phase, the existing MSRCR method is applied. In the second phase, the dynamic range of the MSRCR output is adjusted according to its histogram. In the last phase, the proposed method transforms the retinex output value into the display dynamic range using a logarithm transformation function considering human visual system characteristics. Experimental results show that the proposed algorithm effectively increases the subjective image quality, not only in dark images but also in images including both bright and dark areas. Especially in a low lightness image, the proposed algorithm showed higher performance improvement than the conventional approaches.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.318-321
• /
• 2009

Transformation plasticity is that when a phase transformation of ferrous or non-ferrous alloys progresses even under an extremely small applied stress compared with a yield stress of the material, a permanent deformation occurs. One of widely accepted description for the transformation was proposed by Greenwood and Johnson [1]. Their description is based on an assumption that a weaker phase of an ideal plastic material could deform plastically to accommodate the externally applied stress and the internal stress caused by the volumetric change accompanying the phase transformation. In this study, an implicit finite element model was developed to simulate the deformation behavior of a low carbon steel during phase transformation. The finite element model was coupled with a phase field model, which could simulate the kinetics for ferrite to austenite transformation of the steel. The thermo-elasto-plastic constitutive equation for each phase was adopted to confirm the weaker phase yielding, which was proposed by Greenwood and Johnson [1]. From the simulation, the origin of the transformation plasticity was quantitatively discussed comparing with the other descriptions of it.

• Industrial Engineering and Management Systems
• /
• v.7 no.2
• /
• pp.150-159
• /
• 2008

Lots of EDI-VAN companies are in need of transforming their business transaction systems into Web-based e-Business frameworks because of high cost and closed structure of EDI systems. This research proposes several e-Transformation strategies for EDI-VAN companies to adopt Web-based e-Business frameworks such as ebXML and RosettaNet. Four transformation alternatives are presented and transformation procedure for a medium-sized company is described. The result of this work can be used as a practical guideline for EDI companies to develop their own transformation strategy suitable to its scale and capability, while minimizing the impacts on the pre-existing business processes and information systems.