• The Korean Journal of Mycology
• /
• v.28 no.1
• /
• pp.11-15
• /
• 2000

For artificial cultivation of Phellinus pini (Thore. Fr.) Ames, we conducted some study on mycelium growth and optimum condition for fruitbody formation. The optimum condition for mycelial growth was $25{\sim}30^{\circ}C$ at pH $5.0{\sim}6.0$. Optimum sawdust media were oak sawdust+willow sawdust+rice bran (4.5:4.5:1, V/V) and oak sawdust+pine sawdust+rice bran (4.5:4.5:1, V/V) and the optimum spawn incubation period was about $33{\sim}34$ days. Mycelial growth in the inner portion of oak log was 40 mm after 60 days and duration for first fruitbody primordia formation was about 110 days after inoculation.

• Mycobiology
• /
• v.31 no.4
• /
• pp.200-204
• /
• 2003

Cultural characteristics and phylogenic relationships were investigated and classified among collected strains in Pholiota spp. which contain P. adiposa, P. squarrosa, P. nameko etc. They were tested on the four different media(PDA, MCM, YM, MEA) and sawdust(Alder, Oak, Pine, Popular) substrates. There was a little variation according to the media and sawdust substrates, although PDA and popular sawdust substrate seemed to be better. Most strains showed white colonies, but some strains were brown. Mycelial growth length differed according to the strains. To classify species, the internal transcribed spacer regions(ITS) of the ribosomal DNA(rDNA) repeats from Pholiota spp. were amplified using polymerase chain reaction(PCR) and then sequenced. According to the analysis of ITS sequences, they were classified into five clusters. Their spacer regions were $644{\sim}700$ nucleotides in length. The reciprocal homologies of each ITS region among these strains were ranged from $49.6{\sim}99.9%$. The phylogenic analysis might give a criterion to classify species in the collected strains.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.757-767
• /
• 2015

This study was conducted to investigate the effects of moisture content and particle size of sawdust on the fuel characteristics of wood pellets produced with Mongolian oak (Quercus mongolica, QUM), red pine (Pinus densiflora, PID) and larch (Larix kaempferi, LAK) sawdust using a flat-die pelletizer. Prior to produce wood pellets, the sawdust was controlled to the moisture content of 8, 11, 12% and was screened to the particle size of 2 and 4 mesh. In the analysis of its chemical composition, QUM had a high ash content, and PID and LAK contained large amount of lignin. In case of the fuel characteristics, PID pellets had the lowest moisture content of pellets (P-MC), and LAR pellets was found to have the highest bilk density (BD) and durability (DU). With the increase of moisture content of sawdust (S-MC), P-MC and DU of QUM, PID and LAK pellets increased, but BD of QUM and LAK pellets decreased. When size of sawdust used for the production of wood pellets decreased, P-MC and BD of LAK pellets and BD of QUM pellets increased. Decrease of particle size contributed to the increase of DU of QUM, PID and LAK pellets. In addition, BD and DU of QUM pellets produced with 12% S-MC sawdust increased as its particle size reduced. For LAK pellets, DU was not influence by particle size in the S-MCs of 10% and 12%, but increased with the decrease of particle size in the S-MC of 8%. Based on the results and economical aspects, 10% MC and 2 mesh paricle size for QUM sawdust and 12% MC and 2 mesh particle size for PID sawdust might be optimal conditions for pellets production, and fuel characteristics of wood pellets produced by the conditions greatly exceeded the minimum requirements for the $1^{st}$-grade wood pellets of the standard designated by Korea Forest Research Institute.

• Mycobiology
• /
• v.28 no.4
• /
• pp.180-184
• /
• 2000

In order to find an environment-friendly method to suppress astragal stem rot caused by the isolates of Rhizoctonia solani AG 1 and AG 4, we tested an antagonistic fungus Gliocladium virens G1 was evaluated as a biocontrol agent and estimated inorganic compounds and organic materials were tested for their effect of the disease suppression. G. virens G1 effectively inhibited mycelial growth in a dual culture and caused mycelial lysis in the culture filtrate. No adverse effect was observed when examined for seed germination and seedling growth. Promoted seedling growth was observed with the seed treatment. Seeds of astragal plant were germinated higher in the sterile soil than the natural soil. Of 14 inorganics tested, alum, aluminum sulfate and calcium oxide significantly suppressed the mycelial growth and sclerotial germination. Milled pine bark and oak sawdust also suppressed the mycelial growth. Soil amended with 1% of G. virens G1 composted with pine bark (w/v) significantly controlled astragal stem rot in the glasshouse experiments.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.49-56
• /
• 1993

This study was performed to investigate the pollution-free Korean traditional papermaking characteristics from paper mulberry by sulfomethylation pulping. Bast fibers were pulped by sulfomethylated cooking liquor, and by alkali and alkali-peroxide processes for the comparison. Sulfomethylated pulping resulted in the superior pulp with high yield and better quality compared to those of alkali and alkali-peroxide pulps. Since the pulp was so bright, there was almost no need additional bleaching. Pollutant loads of sulfomethylated pulping effluent were very low in terms of pH, turbidity and color compared to those of alkali. Pollution-free effluents was accomplished by simple filtering treatment with pine bark, charred rice hull and sawdust compost. Pine bark was the most effective in reduction rate of pollutants.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.67-72
• /
• 1993

Hot water extractives of sawdust/particle from domestic and foreign wood species, which were composed of pitch pine, Korean pine, larch, Italy poplar, acacia and oak as Korean wood species, Malaysian oil palm and German spruce were quantitatively analyzed with thin layer chromatography. Sugar components of saccharose, galactose, glucose, fructose and arabinose were contained in these wood species. It was assumed that arabinose and glucose are major inhibitory components against cement hardening in larch and oil palm, respectively, since both species contain a large amount of each sugar. In contrast, fructose might not influence so badly on a cement hardening, when considering that fructose was contained much in Italy poplar with a good cement hardening character. Galactose was a minor component.

• Journal of Sericultural and Entomological Science
• /
• v.19 no.1
• /
• pp.5-7
• /
• 1977

On the purpose of exploiting cellulose resourse which is needed for artificial diet of silkworms, mulberry branch, eastern cotton wood branch, pitch pine pulp, poplar pulp, chaff, sawdust and rice straw were examined. Among the matters above mentioned. mulberry branch and pitch pine pulp were found to be replaceable as cellulose component in the artificial diet. By means of some chemical treatments, it is found that one of the extracted cellulose powder from mulberry branches is more useful in the larval growth.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.258-267
• /
• 2017

In this study, pitch pine (Pinus rigida, PIR) and Mongolian oak (Quercus mongolica, QUM) pellets were fabricated with bark or/and drying waste liquor (DWL) of larch (Larix kaempferi, LAK) as an additive. Based on the results of fuel characteristics of the pellets, optimal conditions for producing the high-quality pellets were provided. In the analysis of chemical composition, bark contained holocelluose and lignin of 90% and over. DWL had 0.1% solid assumed to sugars which are generated from the oven-drying of LAK logs. QUM showed high ash content (2.2%) by containing of bark in the sawdust. Bark and DWL of LAK had high ash content of 4% and over. Calorific values of all specimens and additives were higher than that of the $1^{st}$-grade standard of wood pellets designated by NIFOS (18.0 MJ/kg). PIR and QUM pellets were fabricated with additive of 2 wt% based on the solid weight of oven-dried sawdust using a piston-type flat-die pelletizer, and thus ash content and calorific value of the pellets did not affect by the use of additive. Durability of the pellets increased with the use of additive. Durabilties of pellets, which were fabricated with bark as an additive and DWL as a controller of moisture content for sawdust, did not differ from those of pellets without additives and were lower than those of pellets either with bark or DWL. However, use of both bark and DWL for the production of wood pellets might be favorable because it can make a profit from the collection process of DWL. Based on the results of fuel characteristics of the pellets, QUM and PIR pellets were produced by a flat-die pelletizer. Moisture content (MC), bulk density and durability of the pellets improved with the use of additive. Particularly, sawdust MC of 10% and the addition of bark or DWL for PIR as well as sawdust MC of 12% and the addition of bark for QUM might be optimal conditions for the production of high-quality pellets. Except for the ash content of QUM pellets, other properties of PIR and QUM pellets exceeded the $1^{st}$-grade wood pellets standards of NIFOS.

• Journal of Mushroom
• /
• v.7 no.1
• /
• pp.22-26
• /
• 2009

These experiments were conducted to find the optimum mixing rate of used media for saving the production cost of Flammulina velutipes. The materials for media formation was used needle-leaf tree sawdust, media that finished 1th cultivation of F. velutipes, corncob meal, and rice bran, wheat bran as nutrition source. We inoculated the F. velutipes in 14 kinds of different media types and checked the spawn growth speed, fruit body quality and quantity. Two nutrition agents, which is rice bran and wheat bran, did not affected the incubation period, but the effective stem number, quality and quantity of fruit body was better at rice bran than wheat bran. The quality of fruit body produced at mixed 20% of used media (needle-leaf tree sawdust 60% + used media 20% + rice bran 20%) was similar to control plot (needle-leaf tree sawdust 80% + rice bran 20%), but the yield was improved 10% than control plot 130g. According as the used-media mixing amount increases, quality and quantity of fruit body became low remarkably. Therefore, the optimum mixing amount of used-media was 20% and it increased 10% of fruitbody yield.

• Journal of Sericultural and Entomological Science
• /
• v.35 no.1
• /
• pp.7-10
• /
• 1993

Mulberry grafting season in normally a one month period starting at the end of March. Such a short period creates a shortage of qualified grafters and inflates wages. Pine tree sawdust was tested as a medium in which to preserve graftages. Sawdust was moistened to two ratios of water to dry weight of sawdust (1.5 and 2.0). Scions were either grafted the same day they were collected or first incubated for 10days at 15$^{\circ}C$. Grafting period could be extended to the middle of February under 1.5 times moisture content and fresh scions. Preservation of scions increased water content, T-N, P2O5, CaO and inositol, whereas decreased total C, glucose and fructose. With no preservation total C decreased, inositol increased slightly early March followed sharp decrease, and sucrose increased with time.