• 수산해양기술연구
• /
• 제60권2호
• /
• pp.194-206
• /
• 2024

This study focuses on analyzing the energy-saving effects of the recirculation aquaculture system using seawater source heat pumps and solar power generation. Based on the thermal load analysis conducted using the transient system simulation tool, the annual energy consumption of the recirculation aquaculture system was analyzed and the energy-saving effects of utilizing the photovoltaic system was evaluated. When analyzing the heat load, the sea areas where the fish farms are located, the type of breeding tank, and the circulation rate of breeding water were taken into consideration. In addition, a method for determining the appropriate capacity for each operation time was examined when applying the energy storage system instead of the existing diesel generator as an emergency power, which is required to maintain the water temperature of breeding water during power outage. The results suggest that, among the four seas considered, Jeju should be estimated to achieve the highest energy-saving performance using the solar power generation, with approximately 45% energy savings.

• 한국인구학
• /
• 제12권2호
• /
• pp.122-137
• /
• 1989

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.937-940
• /
• 1992

A cost-saving feeding rate contro method for a batch reaction process is proposed by reconfigurating the flow rate control loop where the feeding rate is estimated by differentiating weight measurement. While the existing control methods require either a flow rate measurement device or a flow rate estimator, the proposed method is devised not to require neither of these facilities by directly controlling the tank weight with a time-varying set point. Experimental evaluation in a pilot-scale unit shows that the proposed method can significantly reduce the actuator hunting of the existing method where the flow rate is estimated by differentiating the weight measurement.

• 한국가스학회지
• /
• 제15권3호
• /
• pp.1-5
• /
• 2011

수소액화 공정은 수소 예냉 에너지, 액화에너지 그리고 Ortho/Para 변환열 제거 등 다량의 에너지가 요구되어 진다. 본 논문은 기존의 수소액화 공정에 LNG냉열을 이용하여 에너지절약 효과를 얻고자 기본설계 및 열해석을 수행하였다. 액화 소요에너지에 LNG냉열을 적용하면 수소액화공정의 에너지절약효과와 함께, LNG기지의 해수에 버려지는 LNG냉열을 회수, 이용하는 일석이조의 에너지절약기술이 된다. 열해석에 의한 설계를 수행한 결과 현재의 액체질소 예냉식 수소액화 플랜트의 소요에너지에 비하여 LNG냉열을 이용할 경우 소요동력량은 75%가 절감되었다. 이는 예냉을 액체질소 대신에 냉열을 사용하기 때문이다. 또한 LNG냉열량은 수소액화량 1T/D기준할 때 15T/D 유량이 요구되었다.

• Ocean and Polar Research
• /
• 제31권4호
• /
• pp.305-318
• /
• 2009

A marine ranching project in Tongyoung was established in 1998, lasting 9 years to 2006. Project activities included the deployment of artificial reefs, the release of young fishes like jacopever and rockfish, and input/output control for specific marine ranching areas in Tongyoung. This report focuses on the economic feasibility of the project in hindsight. Analysis concentrates on three aspects; (a) direct economic benefits, such as increasing effects of fisheries income and savings in harvesting costs, (b) indirect benefits, including increasing effects of recreational fishing and saving R&D costs, and (c) costs, including releasing and purchasing costs of artificial reef and juvenile fish, R&D costs, maintenance costs and harvesting costs. Results show that NPV=4.7 billion won, IRR=8.55% and B/C ratio=1.286 under Scenario 1, which considers the saving effects of R&D costs, and NPV=0.9 billion won, IRR=6.03% and B/C ratio=1.11 under Scenario 2, which does not consider the saving effects of R&D costs, based on 5.5% of the social rate of discount. According to sensitivity analysis, the economic feasibility is very sensitive to the recapture rate.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.880-885
• /
• 2009

The ships have a lot of electric machinery needed to supply electricity from the moment of launching coming out of dry dock to docking at jetty. Thus, the ships always have to use alternator and electric machinery that has low efficiency under the low load. Many government service ships like the MMU training ship have been spending lots of time at jetty rather than sailing at sea. These ships are operated under the condition of low load due to the operation of basic machinery at jetty and electric machineries are driven with the status of low efficiency. This paper would suggest the energy saving method for these ships. The investigation describes that shore connection is a great asset to these ships and that the flow rate control by adjusting revolution with the adoption of inverter is better than flow rate control by using throttle valve to save energy. The result is based on the investigation of cooling pump at MMU training ship.

• 한국항공운항학회지
• /
• 제30권2호
• /
• pp.24-33
• /
• 2022

This study analyzed and derived a plan to reduce fuel consumption of domestic aircraft. Specifically, this study tested fuel consumption in the short-distance flights of B737. Fuel consumption was calculated by substituting the simulation variable values into Matlab. The strength of this study is that the actual operating environment was reflected by collecting the B737 flight data. As a result of the study, the domestic fuel consumption rate in the computed flight plan was less than the current fuel consumption rate. Existing limitations of this study is that it was difficult to reflect the various variables constituting the flight environment, and thus there can be errors in the measurement of the fuel consumption. There are two major expected applications from this study. First, applying the plans from this study will lead to a reduction in the amount of fuel and thus provide positive economic effects for commercial airlines. Second, the plan from this study will provide a basis for pilots to predict fuel consumption more accurately. In conclusion, this study proposes a fuel saving plan with useful applications for pilots and airlines.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1580-1584
• /
• 1991

The purpose of the present study is to investigate, from the viewpoint of labor science, the effect of labor saving by crawler-type truck, which has been used for the rationalization of transportation labor in the citrus orchard on steep slops, and to find out how effectively to utilize the crawler-type truck. In order to attain the purpose mentioned above, portable heart rate memory for measuring physical response of laborer was taken, and the experiment was carried out in the citrus orchard on steep slopes in Japan.

• 국제초고층학회논문집
• /
• 제2권4호
• /
• pp.315-321
• /
• 2013

This building is a first-class super-high office building. This article briefly introduces energy-saving technique and measures adopted in HVAC system, such as cooling and heat sources, water and air system etc.

• 한국환경과학회지
• /
• 제6권4호
• /
• pp.391-397
• /
• 1997

The study was carried out to demonstrate the superiority of used packing in view of energy saving and efficiency of mass transfer, comparing with conventional packing. The results are as follows : 1. Owing to low Pressure drop under high load. 25mm NSW-ring, pp. can cause energy saving 2. The unique magnitudes of used packing are as follows $C_G$=5.78, m=0.67, n=0.46 3. Used packing can make high efficiency including energy saving because of low pres sure drop per the number of transfer unit. To rate the characteristic of packing, It should be carried out that the measurement of pressure drop per packing height and per the number of transfer unfit. This study demonstrated the superiority of used packing by carring out above experiment and could be used as basic reference for design and predicting efficiency of packing tower which is tilled with same packing.