• 한국경영과학회지
• /
• 제23권4호
• /
• pp.75-86
• /
• 1998

We address the problem of determining the optimal processing times and pallet/fixture allocation in Flexible Manufacturing systems in order to minimize tool cost while meeting throughput targets of multiple part types. The problem is formulated as a nonlinear program superimposed on a closed queueing network of the FMSs under consideration. A numerical example reveals the potential of our approach for significant cost saving. We argue that our model can be Integrated Into the process planning system of an FMS to generate efficient process plans quickly.

• 소성∙가공
• /
• 제24권3호
• /
• pp.181-186
• /
• 2015

Many in the industrial world that consume high amounts of energy are trying to reduce energy when manufacturing their products. Energy saving during manufacturing is a cost reduction. Reduced cost is necessary for profit improvement. The Piston Under Drive Brake used in the current study is an automotive transmission part. The original machining after hot forging was changed to machining after cold forging of a plate in order to save energy and cost. Two extrusion shapes along the outer diameter caused decreased tool life because of the interrupted cut during turning. Therefore, a thickness reduction of two extrusion areas in the outer diameter was needed. The current study suggests an effective way to reduce the thickness of interrupted cut by using progressive blanking.

• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.486-492
• /
• 2013

Energy cost has been increasing rapidly to comply with environmental regulations worldwide and the manufacturing industry who consumes more than half of the total energy needs to improve their cost competitiveness considering environmental costs. Machine tools are essential elements in manufacturing industry and efforts have been made recently to increase their energy efficiency mainly by German and Japanese machine tool builders. In this paper, trends in energy saving technology are described on the hardware and software sides of peripheral equipment of machine tools. In addition, the power consumption of a machining center is measured and analyzed to develop a software-based standby strategy for energy saving with peripheral equipment of machine tools.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.475-478
• /
• 2004

Tool costs can comprise a significant part of the total operating costs of Flexible Manufacturing Systems. We address the problem of determining the optimal processing times of individual operations and routing mix in FMSs with multiple routes for each part type in order to minimize tool cost, subject to meeting a throughput constraint for each part type. The problem is formulated as a nonlinear program superimposed on a closed queueing network of the FMSs under consideration. Numerical examples reveal the potential of our approach for significant saving in tool costs.

• 대한산업공학회지
• /
• 제30권4호
• /
• pp.328-337
• /
• 2004

Tool costs can comprise a significant part of the total operating costs of Flexible Manufacturing Systems. We address the problem of determining the optimal processing times of individual operations and routing mix in FMSs with multiple routes for each part type in order to minimize tool cost, subject to meeting a throughput constraint for each part type. The problem is formulated as a nonlinear program superimposed on a closed queueing network of the FMSs under consideration. Numerical examples reveal the potential of our approach for significant saving in tool costs.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 추계학술대회 논문집
• /
• pp.224-228
• /
• 1999

When we construct a manufacturing plant, optimal design is very important. This paper is to simulate an engine manufacturing flow line for commercial vehicle. The parameters we consider in simulation include facility downtime, tool change time, buffer size between consecutive stations, and time to repair the facility. We use AutoMod to compare the alternatives. The objective is to minimize the total cost. Simulation results provide significant cost saving by improving the current design and policy.

• 전기학회논문지P
• /
• 제60권4호
• /
• pp.236-240
• /
• 2011

Currently one of the most importance issues in industrial sector is energy cost and energy efficiency. The manufacturing plants especially have made many efforts to reduce energy cost by implementing maintenances. But in many cases, they are not aware that how much energy could be saved more. If we know the best energy consumption, which signifies energy baseline, we can control the intensity of maintenances. One way to obtain the baseline is using proper statistics from a specific plant, a sector of industry. Energy bandwidth signifies the gap between actual Specific Energy Consumption(SEC) of a certain plant and minimum SEC of the best plant, and estimate energy saving potential(ESP) is a result of bandwidth analysis. We chose a model plant and implemented some maintenance for a year, and then we obtained ESP. Additionally we could determine the decreased amount of carbon emissions from the plant using Carbon Emissions Factor(CEF) by Intergovernmental Panel on Climate Change(IPCC).

• 한국철도학회논문집
• /
• 제15권2호
• /
• pp.97-103
• /
• 2012

허니컴 샌드위치 복합재는 가볍고 강하며, 제작하기가 편리한 장점이 있어 철도차량 차체에 적용되기 시작하였다. 보통 중량감소량은 27%에 달하나, 재료비가 알루미늄 압출재에 비해 높기 때문에 차체에 널리 적용되지 못하였다. 본 논문에서는 두 가지 경량화 재질에 대하여 제작 과정을 고찰하고 원가를 분류하여 과거 자료를 기초로한 경제성을 분석하였다. 복합재 차체의 재료비 상승분을 제작의 용이성으로 상쇄할 수 있으며, 대량생산에 따른 장비비를 저감하면 알루미늄 차체에 비해 경쟁력을 가질 수 있음을 알 수 있었다. 지하철 노선의 통계자료를 참고로 하여 중량 감소에 따른 운행 에너지 감소량도 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.71-73
• /
• 2003

The paper discussed for energy saving technology of electric arc furnace (EAF) in steel making industry. The energy of EAF in steel making process is nearly 10% of total manufacturing cost. This paper is shown new trand of energy saving technology and future study analysis of technological evolution of the EAF by 2010 issued IISI.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.850-853
• /
• 2004

The development of 3D CAM system for the manufacturing of end mills becomes a key approach to save the time and reduce cost for end mills manufacturing. This paper presents the calculation and simulation of end mill tools CNC machining bases on 5-axes CNC grinding machine tool. In this study describes the process of generation and simulation of grinding point data between the tool and the grinding wheels through the machined time. Depend on input data of end mill geometry, wheels geometry, wheel setting, machine setting the end mill configuration and NC code for machining will be generated and visualized in 3 dimension before machining. The 3D visualizations of end mill manufacturing was generated by using OpenGL in C++. The development software was designed by using Microsoft Visual C++, which has many advantages for users, saving time and reducing manufacturing cost.