• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.41-47
• /
• 2017

Recent studies have shown that there are various systems which can be used to monitor hazardous area in a debris flow location, but lack of methodological research on the exact location where each instrument should be installed has hindered the success of this systems. The objective of this study is to suggest the measurement system for monitoring debris-flow and propose the effective method to determine location of measurement system. Previously studied, from 1991 to 2015, were referred and the applied ratio of every instrument was investigated. The measurement information was divided into 8 categories including rainfall, debris-flow velocity, displacement, fluid pore pressure, ground vibration, image processing, impact force and peak flow depth. The result of this study revealed that the most applied instruments to be rain gauge and geophone for measuring average rainfall and ground vibration respectively. The Analytic Hierarchical Process (AHP) method was selected to determine installation location of instrument and the weighting factors were estimated through fine content, soil thickness, porosity, shear strength, elastic modulus, hydraulic conductivity and saturation. The soil thickness shows highest weights and the fine content relatively demonstrates lowest weights. The score of each position can be calculated through the weighting factors and the lowest score position can be judged as the weak point. The weak point denotes the easily affecting area and thus, the point is suitable for installing the measurement system. This study suggests a better method for safely managing the debris-flow through a precise location for installing measurement system.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10071-10077
• /
• 2015

Background: Cervical cancer has become a major public health problem worldwide. Iran, like other developing countries, is facing a number of challenges in managing the disease. This qualitative study documents challenges encountered in cervical cancer preventing programs in Iran. Materials and Methods: In-depth interviews were conducted with 28 participants including eleven patients with cervical cancer, three gynecologic oncologists, five specialists in Obstetrics and Gynecology, five midwives, three health care managers and one epidemiologist in Mashhad Iran, between May and December of 2012. The sample was selected purposively until data saturation was achieved. Data credibility verified via allocated sufficient time for data collection, using member checking and peer debriefing. Data analysis was carried out using conventional content analysis approach with ATLAS. ti software. Results: Findings from data analysis demonstrated 2 major themes and 6 categories about challenges of providing cervical cancer prevention programs including: individual and social challenges (cognitive/behavioral challenges and socio/cultural challenges) and health system challenges (stewardship, financing, competency of health care providers and access to services). Each category included some subcategories. Conclusions: Managing the cervical cancer prevention programs need to include the consideration of individuals, health care providers and health system challenges. Addressing the low level of knowledge, negative attitudes, socio cultural challenges, Poor intersectional collaboration and coordination and intra-sectional management, financing and competency of health care providers are essential steps toward significantly reducing the burdens of cervical cancer.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.3
• /
• pp.134-140
• /
• 2002

Deep submicron NMOSFETs with elevated source/drain can be fabricated using self-aligned selective epitaxial growth(SEG) of silicon for enhanced device characteristics with shallow junction compared to conventional MOSFETs. Shallow junctions, especially with the heartily-doped S/D residing in the elevated layer, give hotter immunity to Yt roll off, drain-induced-barrier-lowering (DIBL), subthreshold swing (SS), punch-through, and hot carrier effects. In this paper, the characteristics of both deep submicron elevated source/drain NMOSFETs and conventional NMOSFETs were investigated by using TSUPREM-4 and MEDICI simulators, and then the results were compared. It was observed from the simulation results that deep submicron elevated S/D NMOSFETs having shallower junction depth resulted in reduced short channel effects, such as DIBL, SS, and hot carrier effects than conventional NMOSFETs. The saturation current, Idsat, of the elevated S/D NMOSFETs was higher than conventional NMOSFETs with identical device dimensions due to smaller sheet resistance in source/drain regions. However, the gate-to-drain capacitance increased in the elevated S/D MOSFETs compared with the conventional NMOSFETs because of increasing overlap area. Therefore, it is concluded that elevated S/D MOSFETs may result in better device characteristics including current drivability than conventional NMOSFETs, but there exists trade-off between device characteristics and fate-to-drain capacitance.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.1
• /
• pp.33-40
• /
• 1992

Several etching phenomena were observed and analyzed in diaphragm process performed on 4-inch (100) Si wafers for sensor application. In case of deep etching to above 300$\mu$m depth, the etch-defects appeared at etched surface could be classified into three categories such as hillocks, reaction products, and white residues. It was known that the hillock had a pyramidal shape or trapizoidal hexahedron structure depending on the density and size of the reaction products. The IR spectra showed that the white residue, which was due to the local over-saturation of Si dissolved in solution, was mostly Si-N-O compounds mixed with a small amount of H and C etc. Also, the difference in both the existence of etch-defects and etch rate distribution over a whole wafer was investigated when the etched surfaces were downward, upward horizontally and erective in etching solutions. The obtained data were analyzed through flow pattern in the etching bath. As the results, the downward and erective postures were favorable in the etch rate uniformity and the etch-defect removal, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.7
• /
• pp.21-29
• /
• 2004

Hot carrier degradation characteristics of Nano-scale CMOSFETs with dual gate oxide have been analyzed in depth. It is shown that, PMOSFET lifetime dominate the device lifetime than NMOSFET In Nano-scale CMOSFETs, that is, PMOSFET lifetime under CHC (Channel Hot Carrier) stress is much lower than NMOSFET lifetime under DAHC (Dram Avalanche Hot Carrier) stress. (In case of thin MOSFET, CHC stress showed severe degradation than DAHC for PMOSFET and DAHC than CHC for NMOSFET as well known.) Therefore, the interface trap generation due to enhanced hot hole injection will become a dominant degradation factor in upcoming Nano-scale CMOSFET technology. In case of PMOSFETs, CHC shows enhanced degradation than DAHC regardless of thin and thick PMOSFETs. However, what is important is that hot hole injection rather than hot electron injection play a important role in PMOSFET degradation i.e. threshold voltage increases and saturation drain current decreases due to the hot carrier stresses for both thin and thick PMOSFET. In case of thick MOSFET, the degradation by hot carrier is confirmed using charge pumping current method. Therefore, suppression of PMOSFET hot carrier degradation or hot hole injection is highly necessary to enhance overall device lifetime or circuit lifetime in Nano-scale CMOSFET technology

• Journal of the Korean Magnetics Society
• /
• v.8 no.1
• /
• pp.6-12
• /
• 1998

Fe-N(iron-nitrogen) crystal phases were prepared by nitrogen ion implantation into $\alpha$-Fe foil with Plasma Source Ion Implantation (PSII). Ion implantation time of sample is treated 15 minutes(FeN15) and 30 minutes (FeN30). The nitrogen depth profiles measured by Auger electron spectroscopy (AES) were determined to be about 12000 $\AA$ and 4000 $\AA$ for the samples of FeN15 and FeN30, respectively. The results of vibrating sample magnetometer (VSM) show that the saturation magnetization of the samples of as-implanted FeN15 and FeN30 was higher than that of pure $\alpha$-Fe foil, which may be owing to $\alpha$'-$Fe_8N$ or $\alpha$"-$Fe_{16}N_2$ phases. Accordingly this study shows the possibility of the partial formation of $\alpha$' or $\alpha$" phase in iron nitrogen produced by PSII method.II method.

• Korean Journal of Adult Nursing
• /
• v.14 no.4
• /
• pp.564-572
• /
• 2002

Purpose: This study was conducted to describe qualitatively the entities of nurse's experiences in general hospitals and to suggest basic data guiding research on developing Standards of clinical nursing practice in Korea. Method: Fourteen nurses working at general hospitals with over 300 beds in Seoul were interviewed in-depth until saturation using tape-recorders and transcription. Result: The central theme of clinical nursing practice experienced by subjects was "being with clients" that means accepting client's personal character, solving client's needs and providing client-centered nursing. A also "being with clients" was felt to be the responsibility of nurses which was learned from their nursing schools. The nursing strategies performed in order to be with patients were proving skillful nursing techniques, accepting, educating, emotional support, advocating, and self-reflecting, the subjects experienced somewhat problematic affects such as difficulties in interpersonal relationship, work overload, negative image of nursing, deficit of self-confidence for nursing actions, poor working conditions, and unfair treatment. Nurses at the hospital practiced with pride when they felt that they were accepted by clients. Conclusion: Further research is needed to analysis problems in clinical practice and the comparison of nurses' experiences of clinical practice, with nurses' experiences in various settings.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.1
• /
• pp.21-26
• /
• 2013

In recent study, infiltration analysis considering rainfall intensity is more economical and practical than existing analysis method. Revised construction slope design standard is also stated to full-fill infiltration analysis considering rainfall for practical stability review. Infiltration analysis considering rainfall for practical stability review. But, to infiltration analysis, the process is complicated by ground impermeability and rainfall intensity. In this study, we perform infiltration analysis to charge infiltration conditions, soil type and rainfall characteristics, for more pratical stability review. Using the result, we can suggest construable condition on the assumption that soil is saturated up to surface zone.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.2
• /
• pp.158-165
• /
• 2014

The enormous quantity of 'Bayer-Process by-products' (BP by-products) discharged by industries producing alumina from bauxite represents an environmental and economical problem. As it is mainly composed of $Fe_2O_3$, $Al_2O_3$, $SiO_2$, CaO and $Na_2O$, it is thought that using BP by-products as a construction material is an effective way to consume such a large quantity of alkaline waste. In this study, This study evaluates the effect of alkali-activated binder based on recycling BP by-products on soil improvement through the evaluation of slope stability and seepage flow numerical analysis. The results of analysis of ground slope safety at dry season and wet season meet standard (Ministry of Land, Infrastructure and Transport, 2006) Especially, when wet season, the ground used soil improving material meet standard, while the ground used soil-nailing method doesn't. Also, permeability coefficient of improved soil is smaller than that of natural soil and saturation depth of reinforced ground surface with improve soil is lower than that of natural soil.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.277-290
• /
• 1993

Dental caries is considered to be caused by demineralization by organic acid produced by microorganism. But the formation of subsurface lesion in initial caries make it diffcult to explain by simple demineralization. This study is carried out on the basis of thermodynamic concept proposed by Margolis and Moreno. The purpose of this study is to evaluate the effects of acid concentration and pH of lactate buffer system on the artificial caries lesion progress. 160 teeth without any crack, defect or opaque enamel were used and coated with nail varnish except the window ($2{\times}3$ mm). Under the constant degree of saturation(D.S.). The teeth were divided into 8 groups according to acid concentration(10mM, 25mM, 50mM, 100mM) and pH(4.3, 5.0, 6.0). Each group was immersed in buffer solution for 3, 6, 9, 18 days under controlled temperature($25^{\circ}C$). After cutting through the window and grinding, the specimens, 100-150 um in thickness, were imbibed in water or air and examined using polarilizing microscope. The depth of the surface and subsurface surface lesion were measured. 1. In the constant pH and D. S. value, the subsurface lesion progresses more rapidly as the concentration of lactic acid increases. (0.01, 0.025, 0.05, 0.1) 2. In the constant acid concentration and DS value, the subsurface lesion progresses more slowly as the pH increases. (4.3, 5.0, 5.5, 6.0) 3. The width of surface lesion seems to be constant independant of pH and acid concentration.