• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.3
• /
• pp.299-310
• /
• 1999

Effect of electrostatic and inertial forces on the pre-charged particle deposition was theoretically and experimentally studied by introducing the inertia impactor subjected to an electric field. To derive the analytic solution, we assumed that a flow was an ideal stagnation flow, a particle had saturation charges, and the electric field within the test section was uniform. On the other hand, $Al_2O_3$ particle groups were used as the test particles, which mean sizes were $1{\mu}m$, $3{\mu}m$, and $5{\mu}m$. To measure the deposition efficiency, the light scattering method was used. The results showed that the deposition efficiency was minimized at a certain nozzle velocity as increasing the nozzle velocity, only if the electric force was applied. As the electric field strength increased, $Stk_{50}{^{1/2}}$ was decreased, and its decreasing rate was reduced with increasing the flow velocity. Moreover the existence of electric field was against the cut-off performance of the inertia impactor.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.4
• /
• pp.273-279
• /
• 2016

In this paper, a high-performance control of the induction motor for electric car was implemented to escape dependence of the rare earth magnet. Proposed high-efficiency control algorithm is a Direct Rotor Field-Oriented Control method that is insensitive to the fluctuation of motor parameters. In the DRFOC method, we need to compensate fluctuation of stator transient inductance and magnetizing inductance caused by the magnetic saturation of induction motor in high-speed area. This paper proposes Back-EMF Observer based on stator current estimator of Luenberger style. Motor control system applied the Voltage Feedback Flux Weakening Control method for high-speed operation. The proposed algorithm was verified through tests by the power train of Extended Range Electric Vehicle consists of induction motor and differential gear.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.10
• /
• pp.1066-1074
• /
• 1990

In this paper, we attempt to control induction motors with high power efficiency as well as high dynamic performance by utilizing the recently developed theories : singular perturbation technique and noninteracting feedback control. Our controller consists of three subcontrollers` a saturation current controller, a decoupling controller, and a well-known flux simulator. The decoupling controller decouples rotor speed (or motor torque) and rotor flux linearly. Our controller does not need the rotor resistance that varies widely with the machine temperature. To illuminate the practical significance of our results, we present simulation and experimental results as well as mathematical performance analysis.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1649-1654
• /
• 2009

Induction motors widely use in industry because structure is simple and hard and cost is generally cheap and they are easy to control. In recently, because of saving steel, ventilation and benefit of frame fixing, rectangular core type induction motors use in industry more and more. This paper presents current characteristic according to stator core cutting degree in three-phase induction motor (IM) with rectangular stator core. According to stator cutting degree, magnetic saturation and paths of flux are changed. Because of these situations, phase currents are unbalance and are produced harmonic components and they cause decrease of efficiency. We analyze each $10^{\circ}$ from $0^{\circ}$ to $30^{\circ}$ using 2-D finite element analysis (FEA). Optimal stator cutting core degree selection supplies stable currents and efficiency improvement. In this paper, loss separation test was executed by IEEE Std. 112-98 Method B and we compare with the result of loss separation by Simulation using FEM and by Experiment.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.5
• /
• pp.659-666
• /
• 2011

Although DAF(Dissolved Air Flotation) has been successfully accepted for water and wastewater treatment, the fundamental characteristics of the process have not been fully investigated. Water is saturated with compressed air to dissolve the air into the water at high pressure in saturation tank. Then the water containing dissolved air is released into a floatation tank at a lower pressure, generating micro-bubbles that rise gently through the water and carry the suspended matter to the surface. This study investigated the removal of sewage using automatic mixture type DAF pump and non-powered flotation tank. Characteristics of two devices were compared and analyzed with samples. The results showed that the PAC exhibited higher performance than other coagulants. When air dosage was 2.5ml/l/min, treatment was stable in operation. In the DAF pump with a pressure of 4 atm., the average size of bubbles was 36.2${\mu}m$. Removal efficiency of SS was 80%. At this time removal efficiency of COD was about 80%, of T-N was 30% and T-P was 70% in stable operation. It was concluded that DAF pump system with micro bubble performed higher efficiencies compared to general DAF system for treating wastewater.

• Journal of Biomedical Engineering Research
• /
• v.35 no.4
• /
• pp.105-110
• /
• 2014

For the combination of MRI and magnetic particle hyperthermia(MPH), we investigated the relative heating efficiency with respect to the strength of the static magnetic field under which the magnetic nanoparticles are to be heated by RF magnetic field. We performed nanoparticle heating experiments at the fringe field of 3T MRI magnet with applying the RF magnetic field perpendicularly to the static magnetic field. The static field strengths were 0T, 0.1T, 0.2T, and 0.3T. To prevent the coil heat from conducting to the nanoparticle suspension, we cooled the heating solenoid coil with temperature-controlled water with applying heat insulators between the solenoid coil and the nanoparticle container. We observed significant decrease of heat generation, up to 6% at 0.3T(100% at 0T), due to the magnetic saturation of the nanoparticles of 15 nm diameter under the static field. We think MPH is still feasible at low magnetic field lower than 0.3T if stronger RF magnetic field generation is permitted.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.590-593
• /
• 1999

$Y_2SiO_5$:Ce was considered as blue phosphor for field emission display because it had an excellent resistance against brightness saturation. But unfortunately It hadn't a sufficient brightness to be applied to FED. In this experiment It-$In_2O_3$, MgO and $SiO_2$ were coated onto $Y_2SiO_5$:Ce phosphor in order to improve the cathodoluminance(CL properties. The coating structures were identified to be the crystalline phases of $In_2O_3$ and MgO respectively. They had fine particle-like shape and were distributed on the surface of $Y_2SiO_5$:Ce phosphor. It was found that the CL efficiency of $Y_2SiO_5$:Ce phosphors were decreased after coatings with In20:j and MgO in voltage range from 500 V to 5 kV. But the brightness of $Y_2SiO_5$:Ce phosphor was increased after coating of 5 0 2 . And also the aging test showed that $In_2O_3$ coating improved the life time of $Y_2SiO_5$:Ce phosphor.

• Design & Manufacturing
• /
• v.13 no.1
• /
• pp.19-24
• /
• 2019

Currently, the world is paying keen attention to the production of renewable energy along with environmental issues, and the share of renewable energy in the world is rising above that of nuclear power. Especially when Korea, which is heavily dependent on foreign countries, needs to reconsider its national competitiveness due to the recent high oil prices, the government's energy policy is to develop and use renewable energy that replaces fossil fuels. In particular, solar energy, the most actively studied and commercialized field of renewable energy, is the main research for solar energy and is commercialized and used. However, the efficiency of solar energy has already reached saturation. Studies are also focusing on increasing the reflectivity of solar energy to increase efficiency. Therefore, this paper proposes a solar collection system that can utilize solar energy rather than solar energy. The proposed solar heat collection system uses solar tracking systems to effectively collect solar energy, particularly those that can be easily produced using single-modular reflectors and have price competitiveness. In addition, temperature measurement experiments with temperature measuring sensors were conducted to ensure reliability in order to verify the results interpreted.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.23-30
• /
• 2014

Purpose - The purpose of this study is to analyze the efficiency of retail businesses by dividing domestic retailers into discount stores, super supermarkets (SSMs), and department stores. It suggests retail-business investment strategies by using data environment analysis (DEA) to analyze how input elements such as store area, parking lot area, number of employees, and sales management expenses for the convenience of customers positively affect business performance measurements such as sales and visiting customers per day. Research Design, Data, and Methodology - The DEA model calculates a ratio of the weighted mean of various inputs to the weighted mean of various outputs and measures the efficiency of a specific decision making unit (DMU). The study included 19 companies (five discount store DMUs, ten SSM DMUs, and four department store DMUs). Because the business elements and sizes of retail store DMUs used in this analysis are different, average per-store input and output variables were used. Data were collected from "The Yearbook of Retail Industry in Korea (2012)." DEA analysis was used to determine differences in efficiency among discount stores, SSMs, and department stores in terms of the business elements of each retail business. It was also used to determine what business elements were excessively invested in by comparing and analyzing efficiency by business elements using SPSS software's ANOVA (Analysis of Variance). Results - The CCR and BCC efficiency analysis found that the efficiency of discount stores is low. We believe that the saturation state of discount stores is a major factor. The ANOVA analysis confirms the VRS hypothesis with a statistically significant difference among the three groups, based on an analysis confidence interval of 95%. CRS and SE were not found to be significantly different among the three groups. As for the post hoc test, which concretely shows differences by group, the Scheffe's multiple comparison analysis test found the average differences between group 1 (discount stores) and group 2 (SSM) to be statistically significant. Conclusions - The DEA efficiency analysis implies that investment in input elements, including store area, parking lot area, and sales management expenses, were excessive in the case of discount stores, while SSMs need to invest more in promotion activities such as gifts, events, and coupons for customer management. Department stores have found that small companies invest excessively in input elements. Department stores need to invest in differentiated shopping mall complexes. This study was limited in acquiring statistical data; various input variables which might have shown more secure customer management and promotional expenses could not be applied. As the study was limited in various aspects of the efficiency analyses because financial analyses of the companies and of causal relationships, including satisfaction and loyalty of visiting customers, were not done, these aspects will be examined in the next study.

• Korean System Dynamics Review
• /
• v.12 no.2
• /
• pp.153-176
• /
• 2011

This paper is a summary of how we constructed a national R&D investment model. Although a national R&D investment is an important decision making for the government as well as industries, currently there were little efforts on making a model reflecting governmental decision making on the individual size of national R&D. We constructed a simple national R&D model through discussion with 3 researchers who have rich experience of governmental investment of national R&D. In this paper, we tried to show how our simple R&D model can reflect the perception on the R&D efficiency that changes as the industry reach to its saturation level.