• 전기학회논문지
• /
• 제62권2호
• /
• pp.270-277
• /
• 2013

Single phase induction motor(SPIM) is used widely because it is driven by single phase source. However, the efficiency of the motor is not good due to saturation of magnetic material. To analyze the motor accurately, the magnetic saturation characteristics should be considered in analysis of equivalent circuit. In this paper, lumped parameter of circuit are derived from multi phase induction motor using method of symmetrical coordinates. Also, we presents a method for the equivalent circuit analysis of SPIM using magnetic saturation rate. The magnetic nonlinearity is considered deriving magnetizing reactance from voltage-current saturation curve. As a results, current characteristic, torque, output and efficiency are shown through analysis of equivalent circuit. A simulation results of SPIM will be used to improve the characteristics and efficiency of motor.

• Journal of Information Processing Systems
• /
• 제15권6호
• /
• pp.1335-1349
• /
• 2019

Crowdsensing technologies can improve the efficiency of smart parking system in comparison with present sensor based smart parking system because of low install price and no restriction caused by sensor installation. A lot of sensing data is necessary to predict parking lot saturation in real-time. However in real world, it is hard to reach the required number of sensing data. In this paper, we model a saturation predication combining a time-based prediction model and a sensing data-based prediction model. The time-based model predicts saturation in aspects of parking lot location and time. The sensing data-based model predicts the degree of saturation of the parking lot with high accuracy based on the degree of saturation predicted from the first model, the saturation information in the sensing data, and the number of parking spaces in the sensing data. We perform prediction model learning with real sensing data gathered from a specific parking lot. We also evaluate the performance of the predictive model and show its efficiency and feasibility.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1099-1110
• /
• 2018

In this paper, a loss minimization control method for interior permanent magnet synchronous motors is presented with considering self-saturation and cross saturation. According to variation of the d-axis and q-axis inductances by different values of the d-axis and q-axis components of currents, it is necessary to consider self-saturation and cross saturation in the loss minimization control method. In addition, the iron loss resistance variation due to frequency variation is considered in the condition of loss minimization. Furthermore, the loss minimization control method is compared with maximum torque per ampere (MTPA), unity power factor (UPF) and $i_d=0$ control methods. Experimental results verify the performance and proper dynamic response of the loss minimization control method with considering self-saturation and cross saturation.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.302-305
• /
• 2003

The electrokinetic remediation tests for natural soil contaminated by lead are performed on unsaturated conditions, in which the degree of saturation is controlled through the changes in water content and the constant unit weight. At the degree of saturation of 70% the small acid range and electrical potential is developed. The changes in the water content are little above the saturation of 90%. But it is increased by 1.7 times at the degree of saturation of 70%. Finally, the efficiency of extraction is improved at 70% than 100%.

• 전력전자학회논문지
• /
• 제26권5호
• /
• pp.364-371
• /
• 2021

A magnetic flux saturation model of Synchronous Reluctance Motors (SynRMs) and a parameter estimation method are proposed at standstill. The proposed magnetic flux model includes the nonlinear relationship between the current and the magnetic flux for self-saturation and cross-saturation. Voltage is injected at standstill to estimate the magnetic flux saturation model. Voltages are injected into the d-axis and q-axis to obtain data on self-saturation. Subsequently, voltages are simultaneously injected into the d-q axis to obtain data on cross-saturation. On the basis of the measured current and the calculated magnetic flux, the parameters of the proposed model are estimated using the least square method (LSM). Simulation and experiment were performed on a 1.5-kW SynRM to verify the proposed method. The proposed model can be used to create a high-efficiency operation table, a sensorless algorithm, and a current controller to improve the control performance of a motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.52-54
• /
• 1998

In this paper, analytically presented the magnetic saturation impact on the efficiency of induction motor. Especially, in this study concerned with various cases such as included magnetic saturation, constant flux.

• Nuclear Engineering and Technology
• /
• 제5권2호
• /
• pp.94-102
• /
• 1973

원주상 재결합 영역에 있어서 전리함의 포화특성을 이론적으로 검토하고, 보론 피복 원통형 전리한을 설계, 제작하여 내부에 질소 또는 헬륨을 760mmHg와 380mmHg로 충전시켜서 실험적임 측정을 하였다. 해석적임 방법으로 도출한 collection efficiency의 식은 실험결과와 잘 일치하였다. 이 결과를 이용하면 보론을 피복한 전리함의 포화특성을 실험적인 측정 업이 설계치에 의한 이론적인 계산만으로 예측할 수 있다.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.561-566
• /
• 2016

In this paper, effective design method of linear induction motor(LIM) for Maglev is proposed in order to maximize system efficiency of Maglev. For the high system efficiency of Maglev, it is important to minimize weight of traction motor. Light weight design by changing materials of core and winding is conducted without changing volume of LIM. For the silicon steel core of primary part for magnetic flux path, iron-cobalt alloy steel with high magnetic saturation characteristic compared to silicon steel is suggested. Moreover, aluminium winding with light weight instead of copper winding is wounded in the widen slot area due to the high magnetic saturation level. For the verification of performance of proposed model, the characteristics are analyzed by using finite element method(FEM).

• 대한기계학회논문집B
• /
• 제38권2호
• /
• pp.165-172
• /
• 2014

단일 노즐을 이용하는 $CO_2$ 포집용 분무탑의 기본적 특성을 실험적으로 구하였다. 다양한 조건 - 주입 기체 유량 및 농도, 주입 흡수제 유량 및 농도 등 - 에서 얻어진 포집성능을 포집효율 뿐만 아니라 재생에너지의 주요 결정요인인 $CO_2$ 포화도 측면에서 검토하였다. 다양한 조건들에서의 포집효율 변화는 흡수제($NH_3$)와 $CO_2$의 상대적 유량비만의 단조증가함수로 잘 표현되었다. 포집후의 흡수제의 $CO_2$ 포화도 또한 $NH_3/CO_2$ 유량비만의 함수로 잘 정리가 되었으나, 포집효율과는 다르게 단조감소함수를 보였으며, 특히 $CO_2$ 포화도와 포집효율과의 상관관계를 보면 기존의 모든 연구들에서 포집효율이 증가할수록 $CO_2$ 포화도가 감소하였다. $CO_2$ 포화도는 낮은 포집효율 조건에서 최대 20-25% 수준이었으나, 90% 이상의 고효율에서는 10% 미만으로 매우 낮았다. 이는 높은 포집효율을 위해 사용되는 흡수제의 양이 과도하며, 다시 재생에너지가 과도하게 필요함을 의미한다.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.112-122
• /
• 1999

In realistic control systems the nonlinear saturation attributes of the control actuator due to physical limitations should be taken into account This nonlinear saturation of actuators may cause not only deterioration of the control performance but also a large overshoot during start-up and shut-down. As the overshoot increases the system may become oscillatory unstable. in this paper the supervisor implementation which guarantees good performance for saturation operation and prevents reset wind up is presented, Moreover the sufficient conditions of the stability for saturated system using supervisory control with a dynamic controller are provided in the continuous-time and in the discrete-time domain Numerical example is illustrated to depict the efficiency of supervisory control for a typical satuaurated production-distribution system controlled by a discrete-time dynamic controller and to validate basic results by simulation.