• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.347-352
• /
• 2006

Narrowband interference can severely degrade the performance of GPS receivers. Detecting the presence of interference and then characterizing it can lead to its removal. Receivers can be reconfigured to focus on other signals or satellites that are less vulnerable to that interference at that moment. Using hardware reconfigurability of FPGA receivers and characterizing the effect of narrowband interference on the GNSS signal quality lead us to a new RFI mitigation technique in which the highest quality and less vulnerable signal can be chosen at each moment. In the previous work [1], the post processing capability of a software GPS receiver, has been used to detect and characterize the CW interference. This is achieved by passing the GPS signal and the interference through the correlator. Then, using the conventional definition of C/No as the squared mean of the correlator output divided by its variance, the actual C/No for each satellite is calculated. In this work, first the 'Exclusion zone' for each satellite signal has been defined and then by using some experiments the effects of different parameters like signal power, jamming power and the environmental noise power on the Exclusion zone have been analyzed. By monitoring the Doppler frequency of each satellite and using the actual C/No of each satellite using the traditional definition of C/No and actual data from a software GPS receiver, the decision to reconfigure the receiver to other signal can be made.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.40.4-41
• /
• 2010

Using magnetic field and plasma moment data obtained by THEMIS satellites(A, D, and E), we selected 203 fast flow events accompanied by dipolarization in the near-Earth region( X(GSM) = -7 ~ -12 RE) and statistically examined their properties. It was found that most of the fast flows show the maximum velocity between 1 minute before dipolarization onset and 2 minutes after onset and proceed earthward and duskward. We also found that only the flows with low velocity of less than 400 km/s are observed at X > -8 RE, while the high velocity flows(as well as low velocity flows) are observed at the further tailward region(X < -8 RE). And most of the tailward flows are slow regardless of distance at X(GSM) = -7 ~ -12 RE. On the other hand, if we consider the fast flow as a bubble (Pontius and Wolf, 1990), the entropy parameter, PV5/3 is an important factor to describe the plasma sheet dynamics. Thus we investigated the relationship between the flow velocity and the amount of change in PV5/3 before and after dipolarization onset and found out that the dipolarizations with more depleted entropy parameter tend to show higher flow velocity. Also we examined how the magnetic field at geosynchronous orbit responds to the fast flow accompanied by dipolarization in the near-earth plasma sheet, using the measurements from GOES 11 and 12 statellites. We found that most of the fast flows do not reach geosynchronous orbit as suggested by Ohtani et al. (2006).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1619-1625
• /
• 2017

Civil global navigation satellite system (GNSS) does not meet user performance requirements for specific PNT (Positioning, Navigation, and Time) applications. Therefore, various differential systems are used to augment GNSS for improving positioning accuracy and integrity. The MTSAT satellite augmentation system (MSAS) is the Japanese satellite based augmentation system. This paper is for analyzing the characteristics of Japanese MSAS in Korean peninsula. First of all, it was done for analyzing not only DGNSS navigation signal but also the navigation parameter through simulation and experimental tests. As a result of data analyses, the sufficient navigation satellites to determine 3-D position based on DGNSS are simultaneously available at MSAS monitering station and the southern region of Korean peninsula. It was verified that the carrier to noise signals are stable to maintain the reliable 3-D position and that the level of 2m (2drms) accuracy is very similar to the ordinary worldwide DGNSS as well.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.448-453
• /
• 2002

Remote sensing technology is one of the most powerful tools for human to know the nature and their living environment. However, before microwave remote sensing was developed and applied, remote sensing application was limited strongly by weather and time. Microwave remote sensing technology solves the problem. It makes us to have the capability to acquire information at all time of the day and under all weather condition, and make remote sensing technology be used in more wider area. Microwave remote sensing system include mainly Synthetic Aperture Radar (SAR), Microwave Radiometer, Microwave Scatterometer, and Altimeter (ALT). As SAR can acquire image whose spatial resolution is similar with visible and infrared image, it is paying much attention to and playing a more and more important role in earth observation. In recent year, the development of new SAR technology (multi-band and multi-polarization technology, InSAR technology, D-InSAR technology, and so on) makes SAR remote sensing go to an new stage, and its application area become more and more widely. The first Synthetic Aperture Radar (SAR) in the world appeared in 1960. After that, SAR and its application all developed very fast. Some radar satellites launched and run (include Seasat-A in 1978, ERS-1 in 1991, JERS-1 in 1992, Radarsat in 1995, and so on) promote SAR research and application in world greatly. China began to develop its SAR sensor and research SAR application in 1970s. After more than 30 years' research, it get some important development in sensor development data processing method, and application. Some operational systems have been used and play an important role. This paper will introduce the development of SAR technology and its application in China.

• Korean Journal of Remote Sensing
• /
• v.15 no.3
• /
• pp.277-288
• /
• 1999

The aim of this review is to provide perspectives on the application of remote sensing techniques for observation of marine environmental changes on various spatio-temporal scales. Currently available remote sensing technologies are reviewed and future direction is suggested. For better utilization of remote sensing, a comprehensive plan should be developed by a demand-side and problem-solving approach. Marine environmental changes should be observed on proper spatio-temporal scales where the processes occur. For appropriate observation and monitoring of various environmental changes in coastal regions, more sensors must be utilized. Platforms other than satellites should also be utilized to expand the spatio-temporal scales of observation. Calibration/validation activities, required for accurate interpretation of remotely sensed data, could utilize buoys and ship-of-opportunity sensors. It is desirable that such systems by developed as a part of an integrated monitoring network.

• Journal of Aerospace System Engineering
• /
• v.13 no.5
• /
• pp.49-56
• /
• 2019

The Long-Term Sustainability (LTS) guidelines have attracted the most attention in the recent formation of international norms of behavior regarding outer space activities. The discussion began at the U.N. COPUOS in 2010. In June 2019, the 21 guidelines were finally adopted. The guidelines include international cooperation to promote and support the observation of the situation of orbiting objects, including space debris, for the purpose of preserving the space environment indefinitely, sharing data and forecasts on space weather, and announcing each country's space policy in accordance with international law. Some guidelines have failed to reach a consensus as the mitigation of space debris is often difficult to separate from space weapons tests. As plans for small satellites and Rendezvous and Proximity Operations have been projected for the future, it is expected that each countries' position on preserving the space environment will become more acute.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.601-601
• /
• 2016

글로벌 위성 기반의 강수량 관측에 대한 역사는 1979년에 Arkin의 의해 제안된 IR방법에 의해 위성으로 부터 강우자료를 유도하는 개념이 도입된 이후 1987년 해양에서의 비교적 정확한 강수량 추정이 가능한 다중 채널의 마이크로파(MW) 복사계를 이용한 방법으로 위성강수 추정에 대한 연구가 활발히 진행되었다. 이 후 두 IR과 MW를 혼합한 방법에서, 또다시 1997년 TRMM위성의 PR(Precpipitation Radar)의 레이더를 이용하는 방법, 그리고 2014년 GPM 핵심 위성(GPM Core Observatory)에 탑재된 Dual PR에 의한 방법으로 위성강수의 정확도를 매우 높여가고 있다. 전지구강수관측위성(GPM, Global Precipitation Measurement Mission) 사업은 미국우주항공국(NASA)과 일본우주항공국(JAXA)의 주도로 전 지구 규모의 강수관측을 목적으로 시작되었으며, 추가 파트너로 프랑스의 CNES(French Centre National d'?tudes Spatiales), 인도의 ISRO(Indian Space Research Organisation), 미국 NOAA, 그리고 유럽연합의 EUMETSAT(European Organisation for the Exploitation of Meteorological Satellites)가 참여하고 있다. 본 연구는 2014년 4월 발사된 GPM핵심 위성의 발사에 따라 제공되는 GPM 위성강우 자료의 정확도 평가를 목적으로 하고 있다. GPM 데이터는 Level-1에서 Level-3까지 다양한 데이터를 제공하고 있으며 본 연구에서는 Level-3의 IMERG 데이터를 이용하여 위성강우의 정확도를 평가하였다. IMERG 위성강우자료는 GPM 위성군의 모든 수동 MW 데이터를 조합하여 강우량을 추정하는 데이터이다. 자료의 시간적 범위는 2015년 8월 18일~8월 20일이고 공간적 범위는 한반도 영역으로 하였으며, 자료의 정확도 평가를 위한 지상계측자료는 기상청 ASOS(Automated Synoptic Observing System)의 강수량 자료를 이용하였다. 자료분석 결과 GPM에서 제공되는 IMERG 데이터의 공간적 분포는 그림 1과 같이 전라도 지역에 많은 강수가 분포하는 것을 확인할 수 있다. 이 기간 동안의 기상청 ASOS 관측 강수량 기록은 전국적으로 1순위가 고창군 25.5mm, 2순위가 부안군 21.9mm, 3순위가 정읍 및 영광군이 19.0mm로 위성으로부터 관측된 값과 지상계측값의 공간적 분포가 매우 유사한 경향을 보이는 것으로 분석되었다. 향후 위성강우 및 지상계측강우의 시계열적 정확도와 총강우량 등의 정확도 평가를 수행할 계획이다.

• Annual Conference of KIPS
• /
• 2012.11a
• /
• pp.72-74
• /
• 2012

위성의 상태를 모니터링하고 임무수행 준비 및 결과를 분석하기 위해 위성에서는 주기적으로 텔레메트리 프레임을 생성하여 지상으로 전송한다. 텔레메트리 프레임을 통해 많은 데이터가 전송될수록 정확한 위성의 상태 분석이 가능하고 위성 운용을 용이하게 할 수 있다. 그러나 위성에서 지상으로 전송할 수 있는 텔레메트리의 전송속도는 하드웨어의 성능에 따라 제한되며, 특히 저궤도 위성의 경우에는 지상과 교신이 가능한 시간이 짧다는 제약으로 인해 한정된 시간 안에 정해진 전송속도로 보낼 수 있는 데이터의 양에는 한계가 있다. 이러한 제약조건 하에서 최대한 많은 정보를 효율적으로 전송할 수 있도록 위성의 텔레메트리를 생성할 때 비트 정보들을 모아 하나의 바이트로 묶어서 텔레메트리 크기를 최소화하는 방법을 이용한다. 위성비행소프트웨어는 태스크 스케쥴링, 열제어, 전력제어, 자세제어, 원격명령처리, 원격측정데이터 처리 등의 기능별로 모듈화 되어있다. 각 모듈마다 텔레메트리로 전송되는 데이터들이 존재하고 비트 정보들을 모으는 기능도 해당하는 모듈에서 각각 담당한다. 따라서 각 모듈들이 독립적이지 못하고 텔레메트리 처리를 담당하는 모듈과 다른 모듈들 간의 커플링(coupling)이 존재하게 되어 하나의 텔레메트리 데이터 변경이 여러 모듈에 영향을 미치게 된다. 본 논문에서는 모듈들 간의 커플링을 최소화하고 텔레메트리의 변경사항이 위성비행소프트웨어 코드 자체에는 영향을 주지 않도록 하기위한 데이터베이스 테이블을 이용한 텔레메트리 처리 방안에 대하여 설명한다.

• Journal of The Korean Astronomical Society
• /
• v.51 no.6
• /
• pp.197-206
• /
• 2018

We present the analysis of KMT-2016-BLG-0212, a low flux-variation ($I_{flux-var}{\sim}20mag$) microlensing event, which is in a high-cadence (${\Gamma}=4hr^{-1}$) field of the three-telescope Korea Microlensing Telescope Network (KMTNet) survey. The event shows a short anomaly that is incompletely covered due to the brief visibility intervals that characterize the early microlensing season when the anomaly occurred. We show that the data are consistent with two classes of solutions, characterized respectively by low-mass brown-dwarf (q = 0.037) and sub-Neptune (q < $10^{-4}$) companions. Future high-resolution imaging should easily distinguish between these solutions.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.4
• /
• pp.1-10
• /
• 2019

Unmanned aerial vehicle(UAV) can acquire images with lower cost than conventional manned aircraft and commercial satellites. It has the advantage of acquiring high-resolution aerial images covering in the field area more than 50 ha. The purposes of this study is to develop the rice grain yield distribution using UAV. In order to develop a technology for estimating the rice yield using UAV images, time series UAV aerial images were taken at the paddy fields and the data were compared with the rice yield of the harvesting area for two rice varieties(Singdongjin, Dongjinchal). Correlations between the vegetation indices and rice yield were ranged from 0.8 to 0.95 in booting period. Accordingly, rice yield was estimated using UAV-derived vegetation indices($R^2=0.70$ in Sindongjin, $R^2=0.92$ in Donjinchal). It means that the rice yield estimation using UAV imagery can provide less cost and higher accuracy than other methods using combine with yield monitoring system and satellite imagery. In the future, it will be necessary to study a variety of information convergence and integration systems such as image, weather, and soil for efficient use of these information, along with research on preparing management practice work standards such as pest control and nutrient use based on UAV image information.