• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.14-23
• /
• 2021

The Army is making efforts to increase combat power by incorporating technologies related to the Fourth Industrial Revolution into the field of defense. In order to utilize these technologies, it is necessary to develop a military tactical communication system that enables transmission and reception of data between command and control system and weapon systems. Therefore, in this paper, we analyze the tactical communication systems of the other countries, derive the limitations of the tactical communication system currently operating in the military. And, a multi-layered integrated operation structure centered on satellites and plans to provide communication on the move to small units are reviewed. Then, we present the necessity of a large-capacity transmission speed by predicting the amount of data that will be generated from weapon systems of the future, and a plan to efficiently manage the network using intelligent network technology.

• Journal of Space Technology and Applications
• /
• v.2 no.2
• /
• pp.121-136
• /
• 2022

Automatic Identification System used in ship communication is required for marine control way, including monitoring of vessel operation in coastal and exchanging of information for safety navigation between them. But, it uses a very high frequency band of approximately 160 MHz, and at the same time, due to the curvature of Earth, there is a limit to the communication distance. Several demonstrations were made successfully over satellite, but not much work has been done yet through cube-satellite which has low-orbit at 500 km altitude. Here, we demonstrate a reception test of AIS (automatic identification system) receiver for a cube-satellites using software-defined radio (SDR). We collected AIS data from ship at port of Busan, Korea, using R8202T2 SDR and established to transmit them using Adam-Pluto and Matlab Simulink. The process of weakening the signal strength to a satellite was constructed using attenuator. Through above process, we demonstrated whether AIS data was successfully received from the AIS payload.

• Advances in aircraft and spacecraft science
• /
• v.9 no.3
• /
• pp.195-215
• /
• 2022

The increasing interest in CubeSat platforms ant their capability of enlarging the frontier of possible missions impose technology improvements. Miniaturized electrical propulsion (EP) systems enable new mission for multi-unit CubeSats (6U+). While electric propulsion systems have achieved important level of knowledge at equipment level, the investigation of the mutual impact between EP system and CubeSat technology at system level can provide a decisive improvement for both the technologies. The interaction between CubeSat and EP system should be assessed in terms of electromagnetic emissions (both radiated and conducted), thermal gradients, high electrical power management, surface chemical deposition, and quick and reliable data exchanges. This paper shows how a versatile CubeSat Test Platform (CTP), together with standardized procedures and specialized facilities enable the acquisition fundamental and unprecedented information. Measurements can be taken both by specific ground support equipment placed inside the vacuum facility and by dedicated sensors and subsystems installed on the CTP, providing a completely new set of data never obtained before. CTP is constituted of a 6U primary structure hosting the EP system, representative CubeSat avionics and batteries. For the first test campaign, CTP hosts the ambipolar plasma propulsion system, called Regulus and developed by T4I. After the integration and the functional test in laboratory environment, CTP + Regulus performed a Test campaign in relevant environment in the vacuum chamber at CISAS, University of Padua. This paper is focused on the test campaign description and the main results achieved at different power levels for different duration of the firings.

• Journal of Astronomy and Space Sciences
• /
• v.40 no.2
• /
• pp.45-57
• /
• 2023

This study examined the effect of solar flux (F10.7) and sunspots number (R) on the daily variation of equatorial electrojet (EEJ) and morning/afternoon counter electrojet (MCEJ/ACEJ) in the ionospheric E region across the eight longitudinal sectors during quiet days from January 2008 to December 2013. In particular, we focus on both minimum and maximum solar cycle of 24. For this purpose, we have collected a 6-year ground-based magnetic data from multiple stations to investigate EEJ/CEJ climatology in the Peruvian, Brazilian, West & East African, Indian, Southeast Asian, Philippine, and Pacific sectors with the corresponding F10.7 and R data from satellites simultaneously. Our results reveal that the variations of monthly mean EEJ intensities were consistent with the variations of solar flux and sunspot number patterns of a cycle, further indicating that there is a significant seasonal and longitudinal dependence. During the high solar cycle period, F10.7 and R have shown a strong peak around equinoctial months, consequently, the strong daytime EEJs occurred in the Peruvian and Southeast Asian sectors followed by the Philippine regions throughout the years investigated. In those sectors, the correlation between the day Maxima EEJ and F10.7 strengths have a positive value during periods of high solar activity, and they have relatively higher values than the other sectors. A predominance of MCEJ occurrences is observed in the Brazilian (TTB), East African (AAE), and Peruvian (HUA) sectors. We have also observed the CEJ dependence on solar flux with an anti-correlation between ACEJ events and F10.7 are observed especially during a high solar cycle period.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.329-329
• /
• 2022

Accurate characterization of terrestrial precipitation variation from high spatial resolution satellite sensors is beneficial for urban hydrology and microscale agriculture modeling, as well as natural disasters (e.g., urban flooding) early warning. However, the widely-used top-down approach for precipitation retrieval from microwave satellites is limited in several hydrological and agricultural applications due to their coarse spatial resolution. In this research, we aim to apply a novel bottom-up method, the parameterized SM2RAIN, where precipitation can be estimated from soil moisture signals based on an inversion of water balance model, to generate high spatial resolution terrestrial precipitation estimates at 0.01º grid (roughly 1-km) from the C-band SAR Sentinel-1. This product was then tested against a common reanalysis-based precipitation data and a domestic rain gauge network from the Korean Meteorological Administration (KMA) over central South Korea, since a clear difference between climatic types (coasts and mainlands) and land covers (croplands and mixed forests) was reported in this area. The results showed that seasonal precipitation variability strongly affected the SM2RAIN performances, and the product derived from separated parameters (rainy and non-rainy seasons) outperformed that estimated considering the entire year. In addition, the product retrieved over the mainland mixed forest region showed slightly superior performance compared to that over the coastal cropland region, suggesting that the 6-day time resolution of S1 data is suitable for capturing the stable precipitation pattern in mainland mixed forests rather than the highly variable precipitation pattern in coastal croplands. Future studies suggest comparing this product to the traditional top-down products, as well as evaluating their integration for enhancing high spatial resolution precipitation over entire South Korea.

• Journal of Space Technology and Applications
• /
• v.4 no.2
• /
• pp.169-183
• /
• 2024

Korea Astronomy and Space Science Institute (KASI) developed the Geochang satellite laser ranging (SLR) system for the scientific research on the space geodesy as well as for the national space missions including precise orbit determination and space surveillance. The operation system was developed based on the server-client communication structure, which controls the SLR subsystems, provides manual and automatic observation modes based on the observation algorithm, generates the range data between satellites and SLR stations, and carry out the post-processing to remove noises. In this study, we analyzed the requirements of operation system, and presented the development environments, the software structure and the observation algorithm, for the server-client communications. We also obtained laser ranging data for the ground target and the space geodetic satellite, and then analyzed the ranging precision between the Geochang SLR station and the International Laser Ranging Service (ILRS) network stations, in order to verify the operation system.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1497-1503
• /
• 2023

To address challenges in classifying clouds and snow cover when calculating ground reflectance in Near-UltraViolet (UV) wavelengths, this study introduces a methodology that combines cloud data from the Geostationary Environmental Monitoring Spectrometer (GEMS) and the Advanced Meteorological Imager (AMI)satellites for snow cover analysis. The proposed approach aims to enhance the quality of surface reflectance calculations, and combined cloud data were generated by integrating GEMS cloud data with AMI cloud detection data. When applied to compute GEMS surface reflectance, this fusion approach significantly mitigated underestimation issues compared to using only GEMS cloud data in snow-covered regions, resulting in an approximately 17% improvement across the entire observational area. The findings of this study highlight the potential to address persistent underestimation challenges in snow areas by employing fused cloud data, consequently enhancing the accuracy of other Level-2 products based on improved surface reflectivity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05a
• /
• pp.43-50
• /
• 2002

Accurate quantitative forecasting of rainfall for basins with a short response time is essential to predict streamflow and flash floods. Previously, neural networks were used to develop a Quantitative Precipitation Forecasting (QPF) model that highly improved forecasting skill at specific locations in Pennsylvania, using both Numerical Weather Prediction (NWP) output and rainfall and radiosonde data. The objective of this study was to improve an existing artificial neural network model and incorporate the evolving structure and frequency of intense weather systems in the mid-Atlantic region of the United States for improved flood forecasting. Besides using radiosonde and rainfall data, the model also used the satellite-derived characteristics of storm systems such as tropical cyclones, mesoscale convective complex systems and convective cloud clusters as input. The convective classification and tracking system (CCATS) was used to identify and quantify storm properties such as life time, area, eccentricity, and track. As in standard expert prediction systems, the fundamental structure of the neural network model was learned from the hydroclimatology of the relationships between weather system, rainfall production and streamflow response in the study area. The new Quantitative Flood Forecasting (QFF) model was applied to predict streamflow peaks with lead-times of 18 and 24 hours over a five year period in 4 watersheds on the leeward side of the Appalachian mountains in the mid-Atlantic region. Threat scores consistently above .6 and close to 0.8 ∼ 0.9 were obtained fur 18 hour lead-time forecasts, and skill scores of at least 4％ and up to 6％ were attained for the 24 hour lead-time forecasts. This work demonstrates that multisensor data cast into an expert information system such as neural networks, if built upon scientific understanding of regional hydrometeorology, can lead to significant gains in the forecast skill of extreme rainfall and associated floods. In particular, this study validates our hypothesis that accurate and extended flood forecast lead-times can be attained by taking into consideration the synoptic evolution of atmospheric conditions extracted from the analysis of large-area remotely sensed imagery While physically-based numerical weather prediction and river routing models cannot accurately depict complex natural non-linear processes, and thus have difficulty in simulating extreme events such as heavy rainfall and floods, data-driven approaches should be viewed as a strong alternative in operational hydrology. This is especially more pertinent at a time when the diversity of sensors in satellites and ground-based operational weather monitoring systems provide large volumes of data on a real-time basis.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.143-154
• /
• 2004

The researchers, who seek geological and environmental information, depend on the remote sensing and aerial photographic datum from various commercial satellites and aircraft. However, the adverse weather conditions and the expensive equipment can restrict that the researcher can collect their data anywhere and any time. To allow for better flexibility, we have developed a compact, a multi-spectral automatic Aerial photographic system(PKNU 2). This system's Multi-spectral camera can catch the visible(RGB) and infrared(NIR) bands($3032{\times}2008$ pixels) image. Visible and infrared bands images were obtained from each camera respectively and produced Color-infrared composite images to be analyzed in the purpose of the environment monitor but that was not very good data. Moreover, it has a demerit that the stereoscopic overlap area is not satisfied with 60% due to the 12s storage time of each data, while it was possible that PKNU 2 system photographed photos of great capacity. Therefore, we have been developing the advanced PKNU 2(PKNU 3) that consists of color-infrared spectral camera can photograph the visible and near infrared bands data using one sensor at once, thermal infrared camera, two of 40 G computers to store images, and MPEG board to compress and transfer data to the computer at the real time and can attach and detach itself to a helicopter. Verification and calibration of each sensor(REDLAKE MS 4000, Raytheon IRPro) were conducted before we took the aerial photographs for obtaining more valuable data. Corrections for the spectral characteristics and radial lens distortions of sensor were carried out.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2523-2529
• /
• 2014

Location estimation service can be provided outdoors using various location estimation system based on GPS. However, location estimation system is based on existing indoor resources as GPS cannot be used because of insufficient visible satellites and weak signals. The fingerprinting technique that uses WLAN signal, in particular, is good to use indoors because it uses RSSI provided by AP to estimate location. However, its accuracy may vary depending on how accurate data the offline stage used where the fingerprinting map is built. The study sampled various data at the stage that builds the fingerprinting map and suggested a location estimation system that enhances its precision by saving the data of high frequency among them to improve this problem. The suggested location estimation system based on majority sampling data estimates location by filtering RSSI data of the highest frequency at the client and server to be saved at a map, building the map and measuring a similar distance. As a result of the test, the location estimation precision stood at minimum 87.5 % and maximum 90.4% with the margin of error at minimum 0.25 to 2.72m.