• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.137-139
• /
• 2004

The monopropellant hydrazine thrusters are widely used for the satellite on-board propulsion system fulfilling various missions in space. They have outstanding features caused by the nearly unlimited restart capability and the very high credibility. The sole monopropellant thruster used at precent in nation is MRE-1 that is a standard component of NASA. It can produce 4.45 N of nominal thrust. Due to the glowing complexity with a satellite mission, the needs for thrusters of the diverse performance are being increased. The numerical simulation could give useful information to develop a new type thruster instead of the experiments performed previously. Therefore it is critical to make a reliable computer code to prepare design change of a thruster. In this paper, the performance analysis and validation of the satellite monopropellant hydrazine thruster currently used is accomplished as the preliminary study to serve valuable data for future design change.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.147-158
• /
• 2020

In this paper, we will review the thruster based reaction wheel momentum dumping method for low Earth orbit satellite. Thruster based momentum dumping is widely used in GEO satellites by performing momentum dumping and attitude control using thrusters at the specific time. LEO satellite should perform momentum dumping at any time, thus it is not appropriate to use GEO satellite's momentum dumping method. In this research, we will review the method for LEO satellite, which perform momentum dumping always and use reaction wheels for attitude control during dumping. To reduce thruster's valve on and off counts, we propose to use the maximum pulse width for thruster operation. To prevent attitude error increase by thrusters, we adjust the thruster operation interval. Through simulation, we verify the proposed method's effects.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.4
• /
• pp.257-261
• /
• 2001

Nonlinear pulse width modulation (PWM) controlled system is considered to achieve control performance of thruster controlled spacecraft. The actual PWM controlled motions occur, very closely, around the average model trajectory. Furthermore nonlinear PWM controller design can be directly applied to thruster controlled spacecraft to determine thruster on-time. Sliding mode control for attitude tracking of three-axis thruster-controlled spacecraft is presented. Simulation results are shown which use modified Rodrigues parameters and sliding mode control law to achieve attitude tracking of a three-axis spacecraft with thrusters.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.468-472
• /
• 2003

MRE-1 dual thruster module(DTM) which will be installed to the present under development KOMPSAT(Korea Multi-Purpose Satellite) can provide reliable and cost-effective means of propulsive control for attitude and maneuvering control system. Thruster heat shield, one of the main components of DTM, is designed to intercept the radiative heat exchange between thruster and satellite during firing. The inside diameter of the current configuration will be decreased a little compared with that of the previous one due to manufacturing method change. Therefore, the possibility of interference between thruster and heat shield due to configuration change is investigated through structural analysis and their results are described in this paper.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.137-141
• /
• 2004

Many monopropellant thrusters use a catalyst for decompose the propellant, hydrazine. The catalyst directly affects the thruster performances and lifetime. Therefore, it is important to confirm that the catalyst is suitable for our thrusters. Until 2002, we used She1l405 catalyst, for satellite RCS thrusters, and H-IIA and M-V launch vehicle upper-stage RCS thrusters. In 2002, however, Shell Chemical Inc. ceased manufacturing She1l405 catalyst and transferred the product to AEROJET, where it was renamed S405. We subsequently investigated the characteristics of AEROJET's S405 catalyst and SOLVAY's KC12GA catalyst, (SOLVAY is a Belgian chemical company, and KC12GA is used for ASTRIUM's thruster) and conducted thruster firing tests using the new catalysts. After conducting, we confirm that the KC12GA catalyst was suitable for our thrusters, and decided to use KC12GA for two satellite programs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.352-355
• /
• 2005

This paper describes an engineering model development of a pulsed plasma thruster, which is capable of an impulse bit of 20uNs and a specific impulse of 800s. The solid fuel which is Teflon allows for a self-contained, inert and stable propellant system. And, the PPT technology makes it possible to consider a revolutionary attitude control system (ACS) concept providing stabilization and pointing accuracies previously obtainable only with reaction wheels, with reduced mass and power requirements.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.295-296
• /
• 2012

In Korea, study of monopropellant thruster have been started from 1990s by KARI (Korea Aerospace Research Institute). 5N hydrazine thruster that is a first Koreanized hydrazine thruster, have been used as flight model for several satellite. In parallel, in order to retain core technology for monopropellant thruster, catalyst and test facility development have been carried out and successfully completed. On the basis of these technology, KARI is performing development of 1N/200N hydrazine thruster and basic research of green propellant thruster.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.294-298
• /
• 2001

Satellite propulsion system is employed for orbit transfer, orbit correction, and attitude control. The monopropellant feeding system in the low-earth-orbit satellite blowdowns fuel to the thrust chamber. The thrust produced by the thruster depends on fuel amount flowed into the combustion chamber. If the thruster valve be given on-off signal from on-board commander in the satellite, valve will be opened or closed. When the thrusters fire fuel flows through opened thruster valve. Instantaneous stoppage of flow in according to valve actuation produces transient pressure due to pressure wave. This paper describes transient pressure predictions of the KOMPSAT2 propulsion system resulting from latching valve and thrust control valve operations. The time-dependent set of the fluid mass and momentum equations are calculated by Method of Characteristics (MOC).

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.461-461
• /
• 2000

Nonlinear pulse width modulation(PWM) controlled system is considered to achieve control performance of thruster-controlled spacecraft. The actual PWM controlled motions occurs, very closely, around the average model rajectory. Furthermore nonlinear PWM controller design can be directly applied to thruster controlled spacecraft to determine thruster on-time. Sliding mode control for attitude tracking of three-axis thruster-controlled spacecraft is presented. Simulation results are shown which use modified Rodrigues parameters and sliding mode control law to achieve attitude tracking of a three-axis spacecraft with thrusters.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.497-501
• /
• 2000

One of the way to derive design parameters of the fuel feeding system in satellite is to analyze unsteady flow of liquid propellant (hydrazine) in the propulsion system. During steady thruster firing the flow rate is constant: if a thruster valve is abruptly shut down among a sets of thrusters, pressure spikes much higher than the initial tank pressure occur. This renders the fuel flow unsteady, and the fluid pressure and flow rate to oscillate. If the pressure spikes are high enough, there are possibilities that propellant explosively decomposes, thruster valves are damaged, and adiabatic detonation of the hydrazine propellant is potentially incurred. Reflected shockwaves could also affect the calibration and operation of the pressure transducers. These necessitate the analysis of unsteady flow in the propulsion system design, and the calculation results obtained through some governing parameter variation are presented in this work.