• 제목/요약/키워드: Satellite Signals

검색결과 510건 처리시간 0.02초

Live GPS L1 재방송 기만신호 생성 분석 (Analysis of the GPS Meaconing Signal Generator for the Live GPS L1 Signal)

  • 김태희;신천식
    • 한국위성정보통신학회논문지
    • /
    • 제11권4호
    • /
    • pp.15-20
    • /
    • 2016
  • 본 논문에서 Live GPS L1 신호에 대하여 재방송 기만신호를 생성하기 위한 하드웨어 신호생성기를 구현한 후 실험을 통하여 성능을 분석하였다. 재방송과 같은 기만 신호는 사용자가 정확한 시각 및 위치정보를 수신하지 못하도록 거짓된 정보를 전달하는 것을 목적으로 한다. 또한 재방송 기만신호는 안테나를 통해 수신된 신호를 신호처리 없이 지연을 통하여 수신기를 쉽게 기만할 수 있는 특징이 있다. 본 논문에서는 이러한 재방송 기만신호를 생성하기 위한 하드웨어를 설계 제작하였으며 수신된 Live GPS신호를 재 송출함으로써 수신기의 영향을 확인하였다. 최대 지연시간은 약 2.6msec까지 가능하며 또한 이격된 안테나를 통하여 수신기의 위치를 재방송 기만기 안테나의 위치로 이동하는 시험을 성공하였다.

이중 대역 방송 서비스가 가능한 비디오 광수신기(ONU: Optical Network Unit)의 개발 (Development of the Video Optical Network Unit for Dual Band Broadcasting Services)

  • 이진영;김보남
    • 한국정보통신학회논문지
    • /
    • 제13권11호
    • /
    • pp.2412-2418
    • /
    • 2009
  • FTTH 인프라 구축이 활성화됨에 따라 광섬유의 대역폭을 효과적으로 이용하기 위한 기술들이 활발히 연구되고 있다. 특히, 방송통신 융합 서비스에 대한 관심과 연구가 활발히 진행되면서 하나의 광섬유를 통해 다수의 방송 서비스를 수용할 수 있는 광 비디오 네트워크 단말장치(VONU: Video Optical Network Unit)의 연구가 요구되고 있다. 따라서, 본 연구에서는 비디오 광 송신장치에서 전광 변환된 디지털 및 아날로그 CATV(Community Antenna TeleVision) 방송 신호와 위성 안테나를 통해 수신되어 전광 변환된 위성방송 신호가 하나의 FITH 광 선로를 통해 전송되고 이를 광전 변환하여 출력하는 VONU를 개발한다. 본 연구에서 개발하는 VONU는 데이터통신 채널을 이용한 IPTV 방송과 함께 CATV, 위성방송 등 모든 방송 콘텐츠를 하나의 광섬유 코어를 통해 전송할 수 있기 때문에 경제적인 방송통신 융합 서비스의 구현이 가능해 진다. 그러나, 서비스 별로 별도의 광수신기를 사용할 경우와는 달리 서비스간 간섭, 신호 왜곡, 잡음비 증가 등에 따른 방송 품질 저하 등의 병존성 문제가 발생하기 때문에 이에 대한 문제를 해결하기 위한 기술들이 필수적이다. 따라서, 본 연구에서 제시하는 VONU는 이에 대한 해결방안을 제안한다.

지역항법 신호에 의한 위성항법수신기 간섭상쇄 성능영향 (Effect of Regional Navigation Signals upon an Interference Cancellation Capable GNSS Receiver Performance)

  • 이장용;장재규;안우근;서승우;이상정
    • 한국항행학회논문지
    • /
    • 제21권3호
    • /
    • pp.258-263
    • /
    • 2017
  • 본 논문에서는 간섭상쇄 기능을 갖춘 지역전파항법 수신기의 GNSS (global navigation satellite system) 위성항법신호 획득성능을 분석하였다. GNSS 항법신호와 동일 주파수영역에 지역전파항법 신호를 사용하여 통합 항법을 수행할 경우 혼신에 의한 영향이 발생하나, 이는 순차적 간섭신호상쇄 알고리즘 등과 같은 간섭상쇄 기술을 통해 어느 정도 극복 가능하다. 하지만 J/S(jamming-to-signal ratio)가 클 경우 잔여 신호와 GNSS신호와의 교차상관 특성에 의해 신호획득 시 잘못 된 검출결과를 보일 수 있다. 본 논문은 Kasami코드를 사용할 경우 GNSS신호와의 혼신에 의한 신호획득 성능저하를 Monte Carlo 시뮬레이션을 통해 분석해 보았으며, 비교를 위해 GNSS Gold 코드의 신호획득 성능과 비교하였다.

새롭게 개발된 항재밍 위성항법장치 점검 시스템 설계 및 검증 (Design and Verification of Newly Developed Anti-jamming GPS Test System)

  • 권병기;이종홍;허용관;이철
    • 한국콘텐츠학회논문지
    • /
    • 제15권12호
    • /
    • pp.1-7
    • /
    • 2015
  • 현재까지 개발된 항재밍 위성항법장치는 주로 대형 무반향 챔버 및 필드시험을 통하여 검증하였다. 대형 무반향 챔버를 이용할 경우 노이즈 등 외부환경에 독립적으로 장비를 검증할 수 있는 장점이 있지만 높은 비용과 챔버 시설 가용 문제 등의 단점이 있다. 그리고 필드시험의 경우 실제 재밍환경과 유사하게 시험할 수 있는 장점이 있지만 군용장비의 경우 보안 문제 및 항상 동일한 조건으로 시험을 할 수 없는 단점이 있다. 본 논문에서는 기존 점검 시스템의 단점을 극복할 수 있는 새로운 항재밍 위성항법장치 점검 시스템을 제안하였다. 제안하는 점검시스템은 크게 소형 챔버, 재밍 분배기, 재밍신호 발생기, 위성 모의기로 구성된다. 소형 챔버에는 다수 재밍을 모의하기 위해 다수의 안테나를 내부에 설치하였고, 다수의 재밍 신호를 제어하기 위한 재밍 분배기를 새롭게 설계하였다. 점검 시스템의 자체 성능 시험과 항재밍 위성항법장치와의 연동 시험을 통해 제안한 점검 시스템의 신뢰성을 확인하였다.

2배체 담배 Nicotiana plumbaginifolia의 핵형 분석과 rDNAs의 Physical Mapping (Karyotype Analysis and Physical Mapping of rDNAs in Diploid Nicotiana plumbaginifolia)

  • 조혜경;구달회;김수영;방재욱
    • Journal of Plant Biotechnology
    • /
    • 제30권1호
    • /
    • pp.7-11
    • /
    • 2003
  • 2배체 담배인 Nicotiana plumbaginifolia를 대상으로 상염색법과 FISH 기법을 통한 염색체 분석을 수행하여 다음과 같은 결과를 얻었다. N. plumbaginifolia의 체세포 염색체 수는 2n=20이며, arm ratio 비교를 통한 핵형 분석에서 중기 염색체 조성은 3쌍의 중부 염색체 (염색체 1,2 및 7)와 7쌍의 차중부 염색체 (염색체 3, 4, 5, 6, 7, 9 및 10)로 관찰되었다. 염색체의 길이는 2.29~4.50 $\mu\textrm{m}$로 나타났으며, 염색체 1번과 2번은 부수체 염색체로 관찰되었다. 5S와 45S rDNA를 탐침으로 FISH를 수행한 결과 2번 염색체의 동원체 부위에서 한 쌍의 5S signal이 확인되었고, 1번 염색체의 부수체에서 한 쌍의 45S signal이 관찰되었다.

Virtual Ground Based Augmentation System

  • Core, Giuseppe Del;Gaglione, Salvatore;Vultaggio, Mario;Pacifico, Armando
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
    • /
    • pp.33-37
    • /
    • 2006
  • Since 1993, the civil aviation community through RTCA (Radio Technical Commission for Aeronautics) and the ICAO (International Civil Air Navigation Organization) have been working on the definition of GNSS augmentation systems that will provide improved levels of accuracy and integrity. These augmentation systems have been classified into three distinct groups: Aircraft Based Augmentation Systems (ABAS), Space Based Augmentation Systems (SBAS) and Ground Based Augmentation Systems (GBAS). The last one is an implemented system to support Air Navigation in CAT-I approaching operation. It consists of three primary subsystems: the GNSS Satellite subsystem that produces the ranging signals and navigation messages; the GBAS ground subsystem, which uses two or more GNSS receivers. It collects pseudo ranges for all GNSS satellites in view and computes and broadcasts differential corrections and integrity-related information; the Aircraft subsystem. Within the area of coverage of the ground station, aircraft subsystems may use the broadcast corrections to compute their own measurements in line with the differential principle. After selection of the desired FAS for the landing runway, the differentially corrected position is used to generate navigation guidance signals. Those are lateral and vertical deviations as well as distance to the threshold crossing point of the selected FAS and integrity flags. The Department of Applied Science in Naples has create for its study a virtual GBAS Ground station. Starting from three GPS double frequency receivers, we collect data of 24h measures session and in post processing we generate the GC (GBAS Correction). For this goal we use the software Pegasus V4.1 developed from EUROCONTROL. Generating the GC we have the possibility to study and monitor GBAS performance and integrity starting from a virtual functional architecture. The latter allows us to collect data without the necessity to found us authorization for the access to restricted area in airport where there is one GBAS installation.

  • PDF

Robustness Examination of Tracking Performance in the Presence of Ionospheric Scintillation Using Software GPS/SBAS Receiver

  • Kondo, Shun-Ichiro;Kubo, Nobuaki;Yasuda, Akio
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
    • /
    • pp.235-240
    • /
    • 2006
  • Ionospheric scintillation induces a rapid change in the amplitude and phase of radio wave signals. This is due to irregularities of electron density in the F-region of the ionosphere. It reduces the accuracy of both pseudorange and carrier phase measurements in GPS/satellite based Augmentation system (SBAS) receivers, and can cause loss of lock on the satellite signal. Scintillation is not as strong at mid-latitude regions such that positioning is not affected as much. Severe effects of scintillation occur mainly in a band approximately 20 degrees on either side of the magnetic equator and sometimes in the polar and auroral regions. Most scintillation occurs for a few hours after sunset during the peak years of the solar cycle. This paper focuses on estimation of the effects of ionospheric scintillation on GPS and SBAS signals using a software receiver. Software receivers have the advantage of flexibility over conventional receivers in examining performance. PC based receivers are especially effective in studying errors such as multipath and ionospheric scintillation. This is because it is possible to analyze IF signal data stored in host PC by the various processing algorithms. A L1 C/A software GPS receiver was developed consisting of a RF front-end module and a signal processing program on the PC. The RF front-end module consists of a down converter and a general purpose device for acquiring data. The signal processing program written in MATLAB implements signal acquisition, tracking, and pseudorange measurements. The receiver achieves standalone positioning with accuracy between 5 and 10 meters in 2drms. Typical phase locked loop (PLL) designs of GPS/SBAS receivers enable them to handle moderate amounts of scintillation. So the effects of ionospheric scintillation was estimated on the performance of GPS L1 C/A and SBAS receivers in terms of degradation of PLL accuracy considering the effect of various noise sources such as thermal noise jitter, ionospheric phase jitter and dynamic stress error.

  • PDF

LTE 시스템을 위한 Cyclostationary 신호 검출 기법의 성능 분석 (Performance Analysis of Cyclostationary Signal Detection Scheme for LTE System)

  • 김승종;김경호;황유민;김진영
    • 한국위성정보통신학회논문지
    • /
    • 제9권2호
    • /
    • pp.28-32
    • /
    • 2014
  • 본 논문에서는 LTE 시스템을 위한 Cyclostationary 신호 검출 기법의 성능을 분석하였다. 스펙트럼 사용 효율을 높이고 주파수를 공유하는 인지무선(Cognitive radio, CR)기술에 Cyclostationary 신호검출 기법을 적용하여, Long term evolution(LTE) 환경의 주파수 대역 내에서 신호를 검출하였다. LTE 시스템은 3rd generation partnership project(3GPP)에서 최대 전송률을 높이고, 낮은 지연을 제공하기 위한 표준으로 지정되었다. 본 논문에서는 하향링크 직교 주파수 분할 다중 접속(Orthogonal frequency division multiple access, OFDMA) 신호를 기준으로 LTE 신호를 생성하였으며, 생성된 신호의 Segment 및 임계값에 따라 검출성능을 분석하였다. 모의실험에 적용된 채널은 가우시안 채널이고, 추후 LTE 시스템에 CR을 적용하기 위한 향후 연구 방향에 대하여 논의하였다.

Buck-Boost DC-DC Converter를 이용한 다중 대역 RF 에너지 수집 시스템 (Multi-Band RF Energy Harvesting System Using Buck-Boost DC-DC Converter)

  • 조춘식
    • 한국위성정보통신학회논문지
    • /
    • 제12권2호
    • /
    • pp.89-93
    • /
    • 2017
  • 본 논문은 Buck-Boost DC-DC 변환기를 이용하여 다중 대역으로 존재하는 RF 신호를 수집하여 에너지를 생성하는 에너지 수집 시스템에 대하여 소개한다. 수집된 전기에너지를 사용하는 부하의 저항이 지속적으로 변하는 환경에서는 부하 저항이 변하여도 DC-DC 변환기의 입력저항이 변하지 않는 Buck-Boost DC-DC 변환기를 사용하였다. 입력으로 들어오는 RF 신호의 주파수 대역이 다양하므로 다중대역을 다 처리 할 수 있도록 정류기를 대역별로 설계하고 정류기 앞에 각 대역별로 매칭 회로를 추가하였다. 크기가 매우 작은 RF 신호를 효과적으로 수집하기 위한 정류기를 위하여 각 대역에서 수집하여 발생시킨 전압을 계속 누적하여 축적하는 방법을 고안하여 매우 작은 크기의 입력 신호에도 일정한 전압이 출력되게끔 회로를 설계하였다. 입력이 -20 dBm의 크기를 가진 RF 신호에도 출력 효율이 20% 정도까지 낼 수 있음을 확인하였다.

IR-UWB Radar에 기반한 효율적인 반사파 제거 알고리즘 및 실시간 구현 (The efficient Reflective Wave Removal algorithm based on IR-UWB Radar and Real-time Implementation)

  • 김승우;최홍락;정원호;김경석
    • 한국위성정보통신학회논문지
    • /
    • 제12권2호
    • /
    • pp.1-10
    • /
    • 2017
  • 본 논문은 정확한 위치인식 및 차세대 측위 기술로써 각광 받고 있는 기술인 IR-UWB(Impulse-Radio Ultra Wideband) Radar를 활용하여 근거리 환경에서 정확한 목표물을 추정하고자 3가지 기존 반사파 제거 알고리즘과 하나의 제안하는 알고리즘을 사용하였다. 수신된 신호에는 목표물 신호 이외에 불필요한 반사파 신호들이 존재한다. 불필요한 신호들을 제거하고 정확한 목표물 신호만을 추정하기 반사파 제거 알고리즘을 사용하였다. 하나의 송신 안테나와 수신안테나로 목표물들의 위치를 실시간으로 추정하였다. 기존의 3가지 반사파 제거 알고리즘의 단점들을 보완하고자 새로운 반사파 제거 알고리즘을 제안하여 가장 정확한 목표물을 추정하였다. 또한 차량 등 외부 탑재를 위해 DSP(Digital Signal Processor)로 변환을 하였다. 본 논문은 향후 진행 되어질 반사파 제거 연구에 도움이 될 것이라 생각한다.