• 제목/요약/키워드: Satellite Signals

검색결과 502건 처리시간 0.027초

Analysis of Pseudolite Augmentation for Vessel Berthing

  • Cho, Deuk-Jae;Park, Sang-Hyun;Suh, Sang-Hyun
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
    • /
    • pp.15-19
    • /
    • 2006
  • GPS has been increasingly exploited to provide positioning and navigation solutions for a variety of applications. In vessel berthing application, however, there are stringent requirements in terms of positioning accuracy, availability and integrity that cannot be satisfied by GPS alone. This is because the performance of satellite-based positioning and navigation systems are heavily dependent on both the number and the geometric distribution of satellite tracked by receivers. Due to the limited number of GPS satellites, a sufficient number of ‘visible’ satellites cannot be sometimes guaranteed. This paper discusses some issues associated with the implementation of ground-based pseudolite augmentation for vessel berthing. Pseudolite means small transmitter that transmits GPS-like signals in local area. Actually, pseudolite can play three different roles in GPS augmentation scheme, depending on the operational conditions. Firstly, in the case of kinematic GPS operation where there are no signal blockages, and more than five satellites are available, additional pseudolites strengthen the GPS satellite-pseudolite geometry, and more accurate and reliable positioning solution can be achieved. Secondly, in the case when there are adverse GPS operational environments in which the number of tracked satellites is less than four, pseudolites can complement the GPS signals. In the third case, GPS signals are completely unavailable, such as when operated indoor. In such cases the pseudolites can replace the satellite constellation. However, the first role will be considered in this paper, since more than four satellite signals can usually be tracked in most marine applications. This paper presents that the pseudolite-augmented precise positioning system can provides continuous centimeter-level positioning accuracy through comparison analysis of RDOP simulation result of the GPS satellite constellation and the pseudolite-augmented GPS satellite constellation.

  • PDF

Self-Interference Cancellation for Shared Band Transmission in Nonlinear Satellite Communication Channels

  • Jung, Sooyeob;Ryu, Joon Gyu;Oh, Deock-Gil;Yu, Heejung
    • ETRI Journal
    • /
    • 제39권6호
    • /
    • pp.771-781
    • /
    • 2017
  • For efficient spectral utilization of satellite channels, a shared band transmission technique is introduced in this paper. A satellite transmits multiple received signals from a gateway and terminal in the common frequency band by superimposing the signals. To improve the power efficiency as well as the spectral efficiency, a travelling wave tube amplifier in the satellite should operate near the saturation level. This causes a nonlinear distortion of the superimposed transmit signal. Without mitigating this nonlinear effect, the self-interference cannot be properly cancelled and the desired signal cannot be demodulated. Therefore, an adaptive compensation scheme for nonlinearity is herein proposed with the proper operation scenario. It is shown through simulations that the proposed shared band transmission approach with nonlinear compensation and self-interference cancellation can achieve an acceptable system performance in nonlinear satellite channels.

Region Defense Technique Using Multiple Satellite Navigation Spoofing Signals

  • Lee, Chi-Hun;Choi, Seungho;Lee, Young-Joong;Lee, Sang Jeong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제11권3호
    • /
    • pp.173-179
    • /
    • 2022
  • The satellite navigation deception technology disturbs the navigation solution of the receiver by generating a deceptive signal simulating the actual satellite for the satellite navigation receiver mounted on the unmanned aerial vehicle, which is the target of deception. A single spoofing technique that creates a single deceptive position and velocity can be divided into a synchronized spoofing signal that matches the code delay, Doppler frequency, and navigation message with the real satellite and an unsynchronized spoofing signal that does not match. In order to generate a signal synchronized with a satellite signal, a very sophisticated and high precision signal generation technology is required. In addition, the current position and speed of the UAV equipped with the receiver must be accurately detected in real time. Considering the detection accuracy of the current radar technology that detects small UAVs, it is difficult to detect UAVs with an accuracy of less than one chip. In this paper, we assume the asynchrony of a single spoofing signal and propose a region defense technique using multiple spoofing signals.

SETTING OF HPA OUTPUT POWER IN COMS DATS CONSIDERING IMD CHARACTERISTICS

  • Park, Durk-Jong;Yang, Hyung-Mo;Ahn, Sang-Il
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
    • /
    • pp.204-207
    • /
    • 2006
  • COMS will receive two different meteorological signals in S-Band from IDACS (Image Data Acquisition and Control System) in ground station before transmitting them in L-Band to user station. MODCS (Meteorological Ocean Data Communication Subsystem) in satellite released the value of required PFD (Power Flux Density) to receive two signals. Thus, DATS (Data Acquisition and Transmission Subsystem) needs to send two signals to satellite with a satisfied EIRP. The value of minimum HPA (High Power Amplifier) output power was estimated by subtracting antenna directional gain and path loss between antenna and HPA from the needed EIRP in this paper. Besides the minimum output power of HPA, the maximum output power was also calculated with considering IMD (Inter-Modulation Distortion) characteristics. IMD is always occurred in the output of HPA when LRIT and HRIT are amplified by using single HPA as COMS application. In this paper, the setting of maximum output power was determined when the IMD of modelled HPA was corresponded to the requirement of MODCS.

  • PDF

다중경로 채널에서 정합필터를 이용한 코드 추적 루프최대 우도 알고리즘 (A Maximum Likelihood Method of Code Tracking Loop Using Matched Filter in Multi-path Channel)

  • 손승호;이상욱
    • 한국위성정보통신학회논문지
    • /
    • 제5권1호
    • /
    • pp.54-57
    • /
    • 2010
  • 위성 기반 측위 시스템은 위치 기반 기술의 핵심 기술로서, CDMA 시스템을 사용한다. CDMA 시스템에서 원활한 위치 측위를 하기 위해서는 확산 부호의 정확한 동기가 이루어져야 한다. 본 논문은 확산 부호의 동기 기법 가운데 부호 추적 기법에 초점을 맞춘다. 특히 다중 경로 환경에서 기존의 부호 추적 기법인 DLL 방법은 적합하지 않다. 본 논문은 수신 신호에서 다중 경로 신호를 축출하여 이를 부호 추적 기법에 사용하는 방법을 제안한다. Spirent simulator를 이용하여 제안 기법을 검증하고 성능 평가를 보인다.

위성항법 신호 이중주파수간 편이 추정오차 분석 (Error Analysis of Inter-Frequency Bias Estimation in Global Navigation Satellite System Signals)

  • 김정래;노정호;이형근
    • 한국항공운항학회지
    • /
    • 제20권3호
    • /
    • pp.16-21
    • /
    • 2012
  • Global navigation satellite systems (GNSS) use dual frequency signals to remove ionosphere delay effect. GNSS receivers have their own biases, called inter-frequency bias (IFB) between dual frequencies due to differential signal delays in receiving each frequency codes. The IFB degrades pseudo-range and ionosphere delay accuracies, and they must be accurately estimated. Simultaneous estimation of ionosphere map and IFB is applied in order to analyze the IFB estimation accuracy and variability. GPS network data in Korea is used to compute each receiver's IFB. Accuracy changes due to ionosphere model changes is analyzed and the effect of external GNSS satellite IFB on the receiver IFB is analyzed.

펄스 레이더의 다단 Stagger PRI 신호분리 알고리즘 (The Algorithm for Deinterleaving of Multi-Step Stagger PRI Signals of Pulse Radars)

  • 임중수
    • 한국위성정보통신학회논문지
    • /
    • 제8권4호
    • /
    • pp.159-163
    • /
    • 2013
  • 본 논문에서는 전자정보시스템을 사용하여 펄스 레이더에서 송신되는 다단 스태거(stagger) PRI(pulse repetition interval) 신호를 정확하게 분석하는 새로운 방법을 제안하였다. 기존의 PRI 신호분석 방법은 레이더 펄스신호 하드웨어 추적기(tracker)를 이용하여 신호도착시간(time of arrival)의 1차 차분을 이용하여 PRI 패턴을 분석하였으나 본 논문에서는 펄스신호들의 도착시간(TOA)의 1차 차분, 2차 차분과 PRI 히스토그램을 이용하여 다단 스태거 PRI 신호를 분석하는 알고리즘을 개발하였다. 본 연구는 펄스 레이더의 다단 스태거 PRI 신호식별에 매우 유용하게 사용할 수 있을 것으로 판단된다.

나로호에 탑재된 GPS 수신기의 항법해와 신호대잡음비의 일반복 특성 (Day-to-Day Repeatability of the Navigation Solution and SNR from the GPS Receiver installed on KSLV-I)

  • 권병문;문지현;신용설;최형돈;조광래
    • 한국항공우주학회지
    • /
    • 제39권8호
    • /
    • pp.774-787
    • /
    • 2011
  • 본 논문은 다중경로신호를 포함한 위성항법신호의 특성에 관한 정량적 분석을 수행하고, 나로우주센터의 발사대에 나로호가 발사대기중일 때에 저장된 데이터를 바탕으로 발사장 주변환경으로부터 발생한 다중경로신호로 인하여 GPS 수신기에서 계산된 항법해 및 신호대잡음비에서 나타난 일반복 특성에 대하여 다룬다. 발사대에 설치된 나로호에서는 GPS 안테나와 주위환경 및 GPS 위성궤도가 거의 변하지 않으므로 계산된 항법해와 신호대잡음비의 변화율과 크기가 그대로 일반복 되고 있음을 확인하였다. 다중경로의 영향에 관한 분석과 발사대에서 관찰된 항법해와 신호대잡음비의 일반복 특성은 위성발사체가 발사대기하고 있을 때에 GPS 수신기의 성능을 안정화시키기 위한 방법을 찾는데 크게 도움이 될 것이다.

FPGA를 기반으로 한 GPS 신호생성기 구현 및 실내측위 시스템 (An Implementation of a GPS Signal Generator based on FPGA and Indoor Positioning System)

  • 최준혁;김영근;안명수
    • 한국위성정보통신학회논문지
    • /
    • 제10권3호
    • /
    • pp.38-43
    • /
    • 2015
  • 본 논문에서는 소프트웨어로 검증된 GPS 신호생성 알고리즘을 FPGA 기반으로 구현함으로써 RF레벨에서 다중 위성신호를 실시간으로 생성 가능한 GPS 신호생성기에 대해 기술한다. 탑재된 신호생성 알고리즘은 궤도 및 환경 오차 모델을 반영하고 수신기 위치를 기반으로 위성 신호를 모의한다. GPS 신호생성기 하드웨어는 16개의 위성 신호를 실시간으로 생성할 수 있는 디지털보드와 IF Data를 RF 신호로 변환해주는 아날로그보드로 구성되어 있다. Windows 기반의 신호생성 시뮬레이터를 제어하는 소프트웨어를 통해 항법신호뿐만 아니라 기만신호, 재밍신호를 생성이 가능하며 GIS 화면위에서 수신기의 경로를 편집할 수 있는 시나리오 구성 기능이 제공된다. GPS 신호생성기는 성능은 상용수신기를 이용해 검증하였다. GPS 신호생성기를 이용한 응용 예로써 실내측위 시스템을 구성하고 시험하였으며 실내측위 시스템의 정확도를 개선하는 것은 추가적인 연구를 진행하고 있다.

항공기용 지상 GPS 시스템의 송신안테나 최적배치 방법 (An Adoptable Deployment Method to the Transmitting Antennas of a Ground based GPS System for Aircraft)

  • 임중수;채규수
    • 한국위성정보통신학회논문지
    • /
    • 제7권3호
    • /
    • pp.105-109
    • /
    • 2012
  • 본 논문에서는 공항에서 항공기를 위해서 사용하는 지상용 GPS 시스템의 송신안테나 최적배치 방법에 대해서 기술하였다. 항공기는 정확한 위치정보를 획득하기 위해서 위성 GPS 신호를 주로 사용하지만 기상변화나 재밍신호 등으로 인하여 위성으로부터 GPS 신호를 수신하지 못하는 경우에는 지상 GPS 시스템을 사용한다. 지상 GPS 시스템은 송신안테나의 위치에 따라서 위치정확도가 크게 달라진다. 본 연구에서는 지상 GPS 시스템의 송신안테나 배치에 따른 측위정확도(DOP)를 예측할 수 있는 알고리즘을 개발했으며, 12개의 안테나를 사용하여 지상에서 고도 10km까지 3차원 영역에 적용하여 DOP 2.5인 영역을 정확하게 도출하였다.