• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.518-524
• /
• 2011

A high assurance IP encryption (HAIPE) compliant protocol accelerator is proposed for military networks consisting of red (or classified) networks and black (or unclassified) networks. The boundary between red and black sides is assumed to be protected via a HAIPE device. However, the IP layer encryption introduces challenges for bandwidth on demand satellite communication. The problems experienced by transmission control protocol (TCP) over satellites are well understood: While standard modems (on the black side) employ TCP performance enhancing proxy (PEP) which has been shown to work well, the HAIPE encryption of TCP headers renders the onboard modem's PEP ineffective. This is attributed to the fact that under the bandwidth-on-demand environment, PEP must use traditional TCP mechanisms such as slow start to probe for the available bandwidth of the link (which eliminates the usefulness of the PEP). Most implementations recommend disabling the PEP when a HAIPE device is used. In this paper, we propose a novel solution, namely broadband HAIPE-embeddable satellite communications terminal (BHeST), which utilizes dynamic network performance enhancement algorithms for high latency bandwidth-on-demand satellite links protected by HAIPE. By moving the PEP into the red network and exploiting the explicit congestion notification bypass mechanism allowed by the latest HAIPE standard, we have been able to regain PEP's desired network enhancement that was lost due to HAIPE encryption (even though the idea of deploying PEP at the modem side is not new). Our BHeST solution employs direct video broadcast-return channel service (DVB-RCS), an open standard as a means of providing bandwidth-on-demand satellite links. Another issue we address is the estimation of current satellite bandwidth allocated to a remote terminal which is not available in DVBRCS. Simulation results show that the improvement of our solution over FIX PEP is significant and could reach up to 100%. The improvement over the original TCP is even more (up to 500% for certain configurations).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3551-3567
• /
• 2016

The Low Earth Orbit satellite network has the unique characteristics of the non-uniform and time-variant traffic load distribution, which often causes severe link congestion and thus results in poor performance for delay-sensitive flows, especially when the network is heavily loaded. To solve this problem, a novel adaptive routing algorithm, referred to as the delay-oriented adaptive routing algorithm (DOAR), is proposed. Different from current reactive schemes, DOAR employs Destination-Sequenced Distance-Vector (DSDV) routing algorithm, which is a proactive scheme. DSDV is extended to a multipath QoS version to generate alternative routes in active with real-time delay metric, which leads to two significant advantages. First, the flows can be timely and accurately detected for route adjustment. Second, it enables fast, flexible, and optimized QoS matching between the alternative routes and adjustment requiring flows and meanwhile avoids delay growth caused by increased hop number and diffused congestion range. In addition, a retrospective route adjustment requesting scheme is designed in DOAR to enlarge the alternative routes set in the severe congestion state in a large area. Simulation result suggests that DOAR performs better than typical adaptive routing algorithms in terms of the throughput and the delay in a variety of traffic intensity.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.97-103
• /
• 2018

In satellite communication, modulated beacon signal is spreaded by gold sequence and the modulated beacon is transmitted via linear phase modulation. Due to the difference in characteristics of the satellite and the receiver on the ground, frequency offset (FO) occurs. An existing modulated beacon receiver is a method of synchronizing the frequency of a modulated beacon signal using FFT(Fast Fourier Transform), which not only increases the delay and complexity in terms of system implementation but also has a separate circuit for compensating the phase difference due to FO and phase offset from FFT points. In order to overcome this problem, this paper proposes and analyzes a scheme for compensating and demodulating the coarse FO and phase offset at one time using the 2-phase shaped characteristics of the modulated beacon signal. Also, through the simulation, the modulation index suitable for the proposed method is analyzed and the appropriate cumulative number is also analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.41-46
• /
• 2013

In this paper, low pass filters(LPF) using corrugated waveguide for satellite communication is proposed. To design the proposed LPF, the corrugated waveguide and impedance transformers are combined. The corrugated waveguide is formed by arrangement of T-junction. To obtain low insertion loss and high isolation propriety, T-junction is designed by using Chebyshev function. Impedance transformers is designed by combining T-junction with different heights at both ends of the corrugated waveguide to get high return loss. The measured results of the proposed LPF have a return loss of over 35.4 dB, a insertion loss of less than 0.1 dB from 12.25 GHz to 12.75 GHz and a isolation propriety of over 54.5 dB from 14 GHz to 14.5 GHz. From these results, it is confirmed that the proposed waveguide LPF can be used for satellite communication.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.145-152
• /
• 2017

In this paper, GNSS(global navigation satellite system) to monitoring the fine for the construction of structure displacement based on satellite communications signals of GNSS. At the same time on USN(ubiquitous sensor network) and proposed a new approach to precise positioning by analyzing the results. A major construction structure for the safety diagnosis and prevent disaster from the risk of collapse. Precision measurement methods to mm level GNSS in that case and experiments in the application of new technologies that can most commonly used to replace the current through the permanent. The way a GNSS baseline and tested it on to prove. As a result, at our country at precise positioning and fine displacement monitoring application virtual reference station(VRS) in a GNSS mm of a margin of error of horizontal and vertical directions can be found.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.63-69
• /
• 2017

In next generation satellite broadcasting system, requirement of high throughput efficiency has been increasing continuously. To increase throughput efficiency and improve bit error performance simultaneously, FTN method and LDPC codes are employed in new sattelite standard, DVB-S3 system. This paper considered three kinds of methods for increase throughput efficiency. Firstly, as conventional one, high coding rate parity matrix in LDPC encoder is considered. Secondly, punctured coding scheme which delete the coded symbols according to appropriate rules is considered. Lastly, FTN method which transmit fater than Nyquist rate is considered. Among of three kinds of methods, FTN method is most efficient in aspect to performance while maintain same throughput efficiency.

• Journal of Internet Computing and Services
• /
• v.21 no.5
• /
• pp.49-56
• /
• 2020

Detecting shadows in images and restoring or removing them was a very challenging task in computer vision. Traditional researches used color information, edges, and thresholds to detect shadows, but there were errors such as not considering the penumbra area of shadow or even detecting a black area that is not a shadow. Deep learning has been successful in various fields of computer vision, and research on applying deep learning has started in the field of shadow detection and removal. However, it was very difficult and time-consuming to collect data for network learning, and there were many limited conditions for shooting. In particular, it was more difficult to obtain shadow data from buildings and satellite images, which hindered the progress of the research. In this paper, we propose a method for generating shadow data from buildings and satellites using Unity3D. In the virtual Unity space, 3D objects existing in the real world were placed, and shadows were generated using lights effects to shoot. Through this, it is possible to get all three types of images (shadow-free, shadow image, shadow mask) necessary for shadow detection and removal when training deep learning networks. The method proposed in this paper contributes to helping the progress of the research by providing big data in the field of building or satellite shadow detection and removal research, which is difficult for learning deep learning networks due to the absence of data. And this can be a suboptimal method. We believe that we have contributed in that we can apply virtual data to test deep learning networks before applying real data.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.103-111
• /
• 2010

For that reason, more and more growing of the internet speed, many kind of the multimedia as if the voice, a letter, a photograph, a moving picture are appearance and integration of the internet as if the wireless internet, the CATV, a satellite is forming. Today, many changes in the communication environment are occurrence. therefore a demands of the user keep up increase. so, in this paper, we developed the SOHO IP-PBX embedded which can automatically exchange the call. the developed IP-PBX have many functions as if the exchange call function, the gateway function, the PSTN backup function, the FAX function, the VPN function, etc. and verified it by an experiment on the rules in KT.

• Korean Journal of Remote Sensing
• /
• v.23 no.2
• /
• pp.137-144
• /
• 2007

In KORDI (Korea Ocean Research and Development Institute), the KOSC (Korea Ocean Satellite Center) construction project is being prepared for acquisition, processing and distribution of sensor data via L-band from GOCI (Geostationary Ocean Color Imager) instrument which is loaded on COMS (Communication, Ocean and Meteorological Satellite); it will be launched in 2008. Ansan (the headquarter of KORDI) has been selected for the location of KOSC between 5 proposed sites, because it has the best condition to receive radio wave. The data acquisition system is classified into antenna and RF. Antenna is designed to be $\phi$ 9m cassegrain antenna which has 19.35 G/T$(dB/^{\circ}K)$ at 1.67GHz. RF module is divided into LNA (low noise amplifier) and down converter, those are designed to send only horizontal polarization to modem. The existing building is re-designed and arranged for the KOSC operation concept; computing room, board of electricity, data processing room, operation room. Hardware and network facilities have been designed to adapt for efficiency of each functions. The distribution system which is one of the most important systems will be constructed mainly on the internet. and it is also being considered constructing outer data distribution system as a web hosting service for offering received data to user less than an hour.

• Journal of Korean Society of Rural Planning
• /
• v.15 no.4
• /
• pp.199-211
• /
• 2009

The aim of this paper is to investigate the applicability of high spatial resolution remote sensing images for conducting the rural amenity resources survey. There are a large number of rural amenity resources and field reconnaissance without a sufficient preliminary survey involves a big amount of cost and time even if the data quality cannot always be satisfied with the advanced study. Therefore, a new approach should be considered like the state-of-the-art remote sensing technology to support field survey of rural amenity resources as well as to identify the spatial attributes including the geographical location, pathway, area, and shape. Generally high-resolution satellite or aerial photo images are too expensive to cover a large area and not free of meteorological conditions, but recently rapidly-advanced internet-based image services, such as Google Earth, Microsoft Bing maps, Bluebirds, Daum maps, and so on, are expected to overcome the handicaps. The review of the different services shows that Google Earth would be the most feasible alternative for the survey of rural amenity resources in that it provides powerful tools to build spatial features and the attributes and the data format is completely compatible with other GIS(Geographic information system) software. Hence, this study tried to apply the Google Earth service to interpret the amenity resources and proposed the reformed work process conjugating the internet-based high-resolution images like satellite and aerial photo data.