• 제목/요약/키워드: Satellite Alignment

검색결과 66건 처리시간 0.029초

The effects of aqua-exercise on the muscle atrophy of hind limb in rats

  • Cho sun-yeo
    • The Journal of Korean Physical Therapy
    • /
    • 제14권3호
    • /
    • pp.373-406
    • /
    • 2002
  • This study was peformed to investigate the effects on skeletal muscle recovery with aqua-exercise; swimming to take the muscle endurance for 20 days on two group of white rats which were the low extremity atrophy group(control groups) by fixed for two weeks and aqua-exercise group(experimental groups) after it. The effects was observed with light and electron microcope to measure the morphological changes of muscle fibers. The results obtained were as follow. 1. Light microscope: In the case of control groups, quadriceps fibers had been irregular alignment, decreased muscle width and the irregular alignment nuclear appeared, as it is degenerative muscle fibers. In the case of experimental groups, the fibers had been regular alignment cells and fibers. The nucleus of muscle had been normal characterized by oval shape and fiber sarcomere clearly classified. 2. Electron microscope: In the case of control groups, there were the quadriceps which was Z-line streaming phenomenon induced at the sarcomere and cells nuclear separated from basal membrane. It was not only observed the sarcomere alignment irregularly and mitochondria damaged, but also vacuoles found. In the case of experimental groups, A band, I band, H band had been clearly appeared, classified at the myofibrils of quadriceps, and electronic dense M-line found in sarcomere. There were observed satellite cells and basal laminas that usually to be appeared at the time of mitochondrial development, skeletal muscle fiber regeneration or development. This results suggest that the aqua-exercise assisted to inhibit the degenerative morphological changes of skeletal muscle cells and help to recover from abnormal states. Especially, it is considered to effect on a normal structural formation.

  • PDF

이온빔을 조사한 폴리스타일렌 기판에서의 액정의 배향특성 (Investigation of Liquid Crystal Alignment on ion beam exposed polystyrene surface)

  • 황현석;이종덕;노정규;한정민
    • 한국위성정보통신학회논문지
    • /
    • 제9권1호
    • /
    • pp.33-37
    • /
    • 2014
  • 본 연구에서는 이온빔을 조사한 폴리스타일렌 기판에 일정강도의 이온빔을 조사한 경우에 발생되는 액정배향의 특성에 대해서 연구하였다. 폴리스타일렌은 기계적강도 및 절연성에서 액정표시소자의 배향막으로 사용되는 폴리이미드 계열의 대체 물질로서 주목받고 있으며, 특히 비접촉 배향에서의 가능성이 새롭게 평가되고 있는 소재이다. 이온빔을 조사하여 이방성을 발생시킨 박막의 표면에서의 액정배향상태를 편광현미경으로 관찰하고, 액정배향에 기여한 메커니즘의 규명을 위해서 XPS(X-ray photoelectron spetroscopy) 분석을 사용하였다. 분석한 결과 15초까지의 이온빔 조사는 액정의 배향을 유발하는 중요한 원인으로 작용함을 알 수 있었으며, 이온빔조사에 의한 액정의 배향방법은 고온안정성도 겸비하고 있는 것을 실험을 통해서 알 수 있었다.

위성의 처짐 측정 및 보상에 관한 연구 (A Study on The Measurement and Compensation of Satellite Deflection)

  • 문홍열;김진희;우성현;조창래
    • 항공우주산업기술동향
    • /
    • 제8권2호
    • /
    • pp.39-45
    • /
    • 2010
  • 질량이 크고 정밀한 정렬이 요구되는 전개형 영상 레이더를 장착하기 위해서는 일반적으로 위성을 수평상태로 놓고 조립을 수행하게 된다. 이는 전개형 안테나의 회전축을 중력축과 일치시키고 전개형 안테나를 중력방향과 반대로 질량을 보상함으로써 무중력 상태를 만들어 회전축에 무리한 힘을 가하지 않기 위함이다. 이러한 전개형 영상 레이더를 장착하기 위해서는 위성이 수평 상태로 놓이더라도 위성체 처짐이 없는 수직상태와 동일한 형상을 만들어 주어야 한다. 처짐이 발생한 위성체에 안테나를 장착하고 수직상태로 변경하면 처짐이 발생한 부분이 강제적으로 원상복귀하려는 힘으로 인해 안테나 정렬이 틀어질 수 있기 때문이다. 본 논문에서는 수평상태에서 위성의 처짐값을 확인하기 위한 방안을 찾고 처짐 보상을 위한 Reaction Force 값을 어떻게 구할 것인지를 보여주고 있다.

  • PDF

저전력 휴대용 통신단말을 위한 이온빔 처리된 HfO2 박막의 특성 연구 (Study of Properties of HfO2 thin film for Low Power Mobile Information Device)

  • 김원배;이호영
    • 한국위성정보통신학회논문지
    • /
    • 제10권3호
    • /
    • pp.89-93
    • /
    • 2015
  • 본 연구에서는 이온빔 처리된 $HfO_2$ 박막을 이용한 액정디스플레이의 프리틸트각을 제어함으로써, 작은 구동전압에서도 안정적으로 구동할 수 있는 디스플레이 소자에 응용할 수 있는 특성을 연구하였다. $HfO_2$ 박막의 원자 수준의 증착을 통해서 높은 유전율의 박막을 제조할 수 있었으며, 이는 저전력 구동을 위해서 필수적인 요소라고 생각한다. 또한 이러한 $HfO_2$ 박막의 액정배향성을 확인하여 균일한 액정배향을 통해서 디스플레이 소자로의 응용가능성을 확인하였다. 특히 $HfO_2$ 박막에서의 액정배향성에 대해서 액정배향의 대표적인 특성인 프리틸트각의 제어를 실험을 통해서 확인하였다. 실험결과 이온빔처리를 한 $HfO_2$ 박막에서의 액정배향의 특성을 접촉각특성을 대표화하여 정량화 할 수 있었다. 본 연구의 결과 액정의 배향성 확보 및 프리틸트각을 제어할 수 있는 고유전율 $HfO_2$ 박막의 제조가 가능한 것을 확인할 수 있었으며, 고유전율 특성에서 기인하는 저전력 구동의 가능성을 확인할 수 있었다.

소형 위성 카메라의 압전작동기 타입 3-축 포커스 메커니즘 설계 (Design of 3-Axis Focus Mechanism Using Piezoelectric Actuators for a Small Satellite Camera)

  • 홍대기;황재혁
    • 항공우주시스템공학회지
    • /
    • 제12권3호
    • /
    • pp.9-17
    • /
    • 2018
  • 지구 관측용 소형 위성카메라의 경우, 중대형 위성에 비해 상대적으로 약한 구조 안정성으로 인해 열악한 발사환경 및 우주환경에서 광부품의 정렬오차가 발생하기 쉽다. 발생한 정렬오차는 위성카메라의 광학 성능 저하를 유발시킨다. 본 연구에서는 소형 위성 카메라의 정렬오차를 보상하기 위하여 3축 포커스 메커니즘을 제안하였다. 이 메커니즘은 3개의 압전 작동기로 구성되어 x-축, y-축 틸트 및 디스페이스(De-space) 보정을 수행할 수 있다. 포커스 메커니즘의 설계 요구조건은 슈미트-카세그레인(Schmidt-Cassegrain) 타입의 목표 광학계 설계에서 도출되었다. 부경 정렬오차 보상을 위하여 부 반사경의 뒤에 포커스 메커니즘을 부착하여 부경의 3축 운동을 제어하였다. 이 때 파면오차로 인한 광학 성능 저하를 최소화하기 위한 플렉셔를 Box-Behnken 실험계획법을 통하여 설계하였으며, ANSYS를 이용하여 파면오차 해석을 수행하였다. 제작된 포커스 메커니즘은 작동기의 수학적 모델링, PID 제어기 설계, 서보 제어실험을 통해 서보성능을 검증하였다.

포커스 메커니즘이 적용된 소형 위성 카메라의 제작 및 성능 실험 (Fabrication and Performance Test of Small Satellite Camera with Focus Mechanism)

  • 홍대기;황재혁
    • 항공우주시스템공학회지
    • /
    • 제13권4호
    • /
    • pp.26-36
    • /
    • 2019
  • 고해상도 지구 관측위성에서는 광학 부품간 정밀한 위치 정렬도가 요구된다. 그러나, 가혹한 위성 발사환경 및 우주환경 같은 외부 요인에 의해 광부품의 정렬오차가 발생한다. 이러한 정렬오차에 의해 저하된 영상품질을 보상하기 위해 포커스 메커니즘이 적용된 위성광학계의 설계가 필요하다. 본 논문에서는 위성카메라 정렬오차 보상이 가능한 목표광학계의 제작 및 성능 실험에 대한 연구를 수행하였다. 먼저 설계된 목표광학계를 제작/조립/정렬하였으며, 이 완료된 목표 광학계를 사용하여 영상 촬영 실험을 수행하였다. 영상 촬영 실험은 포커스 메커니즘에 의한 상의 변화를 이미지로 확인하는 실험과 오토콜리메이터를 이용하여 USAF 타깃을 촬영해 MTF를 분석하는 실험을 수행하였다. 실험 결과를 통해 포커스 메커니즘을 통하여 정렬오차를 충분히 보상할 수 있음을 확인하였으며, 궤도상에서 정렬오차를 보상할 수 있는 리포커싱의 기초자료를 확보하였다.

Analysis and Test results for the EOS(Electro Optical Subsystem) geometric mapping of the KOMPSAT2 Telescope

  • Jung Dae-Jun;Jang Hong-Sul;Lee Seung-Hoon
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
    • /
    • pp.489-492
    • /
    • 2005
  • As a former level of MSC(Multi Spectral Camera) telescope of the KOMPSA T2satellite, the several performance tests of EOS(Electro Optical Subsystem) were performed in the EOS level. By these tests, not only the design requirement of payload can be verified but also the test result can be the important criterion to estimate the performance of payload in the launch and space orbit environment. The EOS Geometric Mapping test is to verify the accuracy of the alignment & assembly on the Subsystem of the MSC by measurement like these; LOS(Line of Sight), LOD(Line of Detector), Band to Band Registration, Optical Distortion and Reference Cube. This paper describes the test results and the analysis for the EOS Geometric Mapping.

  • PDF

저궤도 위성의 자세센서 별 추적기 초기 운용 분석 (Analysis of Initial Activation and Checkout Results of Attitude Sensor Star Trackers for a LEO Satellite)

  • 임조령;최홍택
    • 항공우주기술
    • /
    • 제11권2호
    • /
    • pp.87-95
    • /
    • 2012
  • 본 기술논문에서는 고기동 고정밀 위성의 별 추적기 초기 점검 원격측정 데이터가 분석되었다. 최근에 발사된 위성은 고기동 고정밀 위성이므로 고도의 요구조건을 만족하기 위해 광학계, 전자부, 배플이 분리된 형태로 광학계 부분의 온도를 20 degC 근처로 유지하면서 저주파 오차 성능을 향상 시킨 프랑스 SODERN사의 SED36을 사용하였다. 본 논문에서는 위성으로부터 내려 받은 원격측정 데이터의 처리를 통해 초기 점검 상태, 요구 조건 만족 여부, 이상 현상 및 주요 임무 기동에서의 별 추적기 잡음각 성능 분석 결과를 제시하였다.

Mechanical Design for an Optical-telescope Assembly of a Satellite-laser-ranging System

  • Do-Won Kim;Sang-Yeong Park;Hyug-Gyo Rhee;Pilseong Kang
    • Current Optics and Photonics
    • /
    • 제7권4호
    • /
    • pp.419-427
    • /
    • 2023
  • The structural design of an optical-telescope assembly (OTA) for satellite laser ranging (SLR) is conducted in two steps. First, the results of a parametric study of the major design variables (e.g. dimension and shape) of the OTA part are explained, and the detailed structural design of the OTA is derived, considering the design requirements. Among the structural-shape concepts of various OTAs, the Serrurier truss concept is selected in this study, and the collimation of the telescope according to the design variables is extensively discussed. After generating finite-element models for different structural shapes, self-gravity analyses are performed. To minimize the deflection and tilt of the mirror and frame for the OTA under the limited design requirements, a parametric study is conducted according to design variables such as the shapes of the upper and lower struts and the spider vane. The structural features found in the parametric study are described. Finally, the OTA structure is designed in detail to maintain the optical alignment by balancing the gravity deflections of the upper and lower trusses using the optimal combination of the parameters. Additionally, thermal analysis of the optical telescope design is evaluated.

Analysis of Tip/Tilt Compensation of Beam Wandering for Space Laser Communication

  • Seok-Min Song;Hyung-Chul Lim;Mansoo Choi;Yu Yi
    • Journal of Astronomy and Space Sciences
    • /
    • 제40권4호
    • /
    • pp.237-245
    • /
    • 2023
  • Laser communication has been considered as a novel method for earth observation satellites with generation of high data volume. It offers faster data transmission speeds compared to conventional radio frequency (RF) communication due to the short wavelength and narrow beam divergence. However, laser beams are refracted due to atmospheric turbulence between the ground and the satellite. Refracted laser beams, upon reaching the receiver, result in angle-of-arrival (AoA) fluctuation, inducing image dancing and wavefront distortion. These phenomena hinder signal acquisition and lead to signal loss in the course of laser communication. So, precise alignment between the transmitter and receiver is essential to guarantee effective and reliable laser communication, which is achieved by pointing, acquisition, and tracking (PAT) system. In this study, we simulate the effectiveness of tip/tilt compensation for more efficient laser communication in the satellite-ground downlink. By compensating for low-order terms using tip/tilt mirror, we verify the alleviation of AoA fluctuations under both weak and strong atmospheric turbulence conditions. And the performance of tip/tilt correction is analyzed in terms of the AoA fluctuation and collected power on the detector.