• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.7
• /
• pp.936-942
• /
• 2015

The purpose of this study was to characterize genetic architecture of behavior patterns in Sapsaree dogs. The breed population (n=8,256) has been constructed since 1990 over 12 generations and managed at the Sapsaree Breeding Research Institute, Gyeongsan, Korea. Seven behavioral traits were investigated for 882 individuals. The traits were classified as a quantitative or a categorical group, and heritabilities ($h^2$) and variance components were estimated under the Animal model using ASREML 2.0 software program. In general, the $h^2$ estimates of the traits ranged between 0.00 and 0.16. Strong genetic ($r_G$) and phenotypic ($r_P$) correlations were observed between nerve stability, affability and adaptability, i.e. 0.9 to 0.94 and 0.46 to 0.68, respectively. To detect significant single nucleotide polymorphism (SNP) for the behavioral traits, a total of 134 and 60 samples were genotyped using the Illumina 22K CanineSNP20 and 170K CanineHD bead chips, respectively. Two datasets comprising 60 (Sap60) and 183 (Sap183) samples were analyzed, respectively, of which the latter was based on the SNPs that were embedded on both the 22K and 170K chips. To perform genome-wide association analysis, each SNP was considered with the residuals of each phenotype that were adjusted for sex and year of birth as fixed effects. A least squares based single marker regression analysis was followed by a stepwise regression procedure for the significant SNPs (p<0.01), to determine a best set of SNPs for each trait. A total of 41 SNPs were detected with the Sap183 samples for the behavior traits. The significant SNPs need to be verified using other samples, so as to be utilized to improve behavior traits via marker-assisted selection in the Sapsaree population.

• The korean journal of orthodontics
• /
• v.50 no.5
• /
• pp.293-303
• /
• 2020

Objective: To investigate the three-dimensional (3D) surgical accuracy between virtually planned and actual surgical movements (SM) of the maxilla in two-jaw orthognathic surgery. Methods: The sample consisted of 15 skeletal Class III patients who underwent two-jaw orthognathic surgery performed by a single surgeon using a virtual surgical simulation (VSS) software. The 3D cone-beam computed tomography (CBCT) images were obtained before (T0) and after surgery (T1). After merging the dental cast image onto the T0 CBCT image, VSS was performed. SM were classified into midline correction (anterior and posterior), advancement, setback, anterior elongation, and impaction (total and posterior). The landmarks were the midpoint between the central incisors, the mesiobuccal cusp tip (MBCT) of both first molars, and the midpoint of the two MBCTs. The amount and direction of SM by VSS and actual surgery were measured using 3D coordinates of the landmarks. Discrepancies less than 1 mm between VSS and T1 landmarks indicated a precise outcome. The surgical achievement percentage (SAP, [amount of movement in actual surgery/amount of movement in VSS] × 100) (%) and precision percentage (PP, [number of patients with precise outcome/number of total patients] × 100) (%) were compared among SM types using Fisher's exact and Kruskal-Wallis tests. Results: Overall mean discrepancy between VSS and actual surgery, SAP, and PP were 0.13 mm, 89.9%, and 68.3%, respectively. There was no significant difference in the SAP and PP values among the seven SM types (all p > 0.05). Conclusions: VSS could be considered as an effective tool for increasing surgical accuracy.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.1
• /
• pp.121-133
• /
• 2013

This paper presents the results of an investigation into the pull-out capacity characteristics of screw anchor piles. Theoretical background of screw anchor pile (SAP) was first discussed. A series of reduced-scale model tests were performed on a number of cases with different SAP geometries such as pitch and diameter of screw as well as relative density of the model ground. The applicability of the pull-out capacity prediction equations were also examined based on the test results. It was shown that the pitch of screw has negligible effect on the pull-out capacity, while the diameter of screw has relatively large effect on pull-out capacity under a given condition. Practical implications of the findings from this study are discussed in great detail.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.108-113
• /
• 2014

The combined process of Sliding Arc Plasma and corona dielectric barrier discharge process (CDBD) was used to efficiently improve harmful substance, which convert into OH radicals which have strong oxidation potential, and so have deodorization and sterilizing effects, by generating specific radicals and anion and then reacting with the moisture contained in harmful substance. As a result of experiment, even if the size of SAP reactor is reduced from 80 A to 50 A, there is no much change and therefore it is judged the size of reactor may be minimized. And it was confirmed that after the anion and ozone generated from CDBD rector react with harmful substance, a anion was reduced from 510,000 ppb to 470 ppb and ozone from 98 ppb to 22 ppb. It was also judged the stability and durability of plasma producer are excellent. Accordingly, it is considered the harmful substances which exist in indoor air quality will be efficiently improved and removed by using further plasma combined process through this study.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.2
• /
• pp.131-136
• /
• 2014

This study was carried out to determine the effects of wind speed on physiological responses in 'Fuji' apple (Malus pumila Miller). Two levels of wind blowing (3 and $5m{\cdot}s^{-1}$) were produced by large electric fans. Photosynthetic rate was reduced by one-way wind blowing treatment at $5m{\cdot}s^{-1}$, compared to the mild wind control, and this reduction was more obvious with stronger wind and increasing duration of wind application. The reduction in photosynthesis by the wind treatments was correlated with that in the proportion of opened stomates and stomatal conductance. The one-way wind treatment at $5m{\cdot}s^{-1}$ caused a leaf browning and leaf fall, and this negative effect became more serious with increasing time of exposure to the wind treatments. The sap flux through stem increased in all wind treatments compared to the natural mild wind.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.9
• /
• pp.937-946
• /
• 2011

Several isolates of Bacillus thuringiensis (Bt) were screened for the vegetative insecticidal protein (Vip) effective against sap-sucking insect pests. Screening results were based on $LC_{50}$ values against cotton aphid (Aphis gossypii), one of the dangerous pests of various crop plants including cotton. Among the isolates, the Bt#BREF24 showed promising results, and upon purification the aphidicidal protein was recognized as a binary toxin. One of the components of this binary toxin was identified by peptide sequencing to be a homolog of Vip2A that has been reported previously in other Bacillus spp. Vip2 belongs to the binary toxin group Vip1-Vip2, and is responsible for the enzymatic activity; and Vip1 is the translocation and receptor binding protein. The two genes encoding the corresponding proteins of the binary toxin, designated as vip2Ae and vip1Ae, were cloned from the Bt#BREF24, sequenced, and heterologously expressed in Escherichia coli. Aphid feeding assay with the recombinant proteins confirmed that these proteins are indeed the two components of the binary toxins, and the presence of both partners is essential for the activity. Aphid specificity of the binary toxin was further verified by ligand blotting experiment, which identified an ~50 kDa receptor in the brush border membrane vesicles of the cotton aphids only, but not in the lepidopteran insects. Our finding holds a promise of its use in future as a candidate gene for developing transgenic crop plants tolerant against sap-sucking insect pests.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.25-31
• /
• 2016

Recently, with greatly improving the wireless communication technology, new services are created using smart sensors, i.e., machine-to-machine (M2M) and Internet of Things (IoT). In this paper, we propose a novel IoT device (IoTD) personalization method that adopt Small-cell Access Points (SAPs) to control IoTDs using user equipments (UEs), e.g., smart phones and tablet PC, from service users. First, we introduce a system architecture that consists of UE, IoTD, and SAP and propose the IoTD personalization method with two procedures, i.e., IoTD profile registration procedure and IoTD control procedure. Finally, through simulations, we evaluated the system performance of the proposed scheme and it is shown that the proposed scheme outperforms the conventional scheme in terms of the packet delay, packet loss probability, and normalized throughput.

• Journal of Radiation Industry
• /
• v.5 no.1
• /
• pp.25-33
• /
• 2011

Skin contact allergy (SCA) is not life-threatening, but a large number of people have been suffered from the reactions caused by various kinds of chemicals and products. Thus, in this study, radiation technology was employed to improve the traditional herb addition method on the SCA reduction of Rhus verniciflua sap (RVS). Rhus verniciflua has traditionally been used as an herbal medicine plant, but its urushiol derivatives are known as a major allergen for the SCA. The present study was commenced to assess the allergenicity of both gamma-irradiated and non-irradiated RVS by using guinea-pig maximization test (GPMT) in order to probe the mechanism of an SCA. In the acute dermal irritation assays, non-irradiated RVS caused erythema, but the irradiated RVS did not provoke any erythema on the abdominal skin of the guinea pigs. From the result of the GPMT, urushiols, the main chemical components of RVS, were identified as an extreme skin sensitizer, and the removal of urushiols by irradiation extremely reduced the erythema. These results suggest that radiation technology is a novel method to reduce SCA through the removal of urushiols of RVS.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.55-55
• /
• 2019

Strawberry which is the genus Fragaria under family Rosaceae is one of the most important fruit plants for both fresh consumption and food processing in the temperate and subtropical countries. Propagation of strawberry is achieved either through runners or by in vitro micropropagation. Meristem tips, generally obtained from runners of virus-free plants, are commonly used to establish in vitro cultures, which are employed for mass propagation or as a source of plant material for regeneration and transformation experiments. This study was conducted to determine the optimal natural additives strength to improve sprouting shoot rate of apical meristem of strawberry 'Seolhyang'. Strawberry apical meristem at size (0.2 mm to 0.3 mm) with leaf primordials were cultured on the 1/3MS(Murashige & Skoog) medium supplemented with five natural additives such as coconut milk, maple sap, banana powder and peptone. The sprouting ratio and growth characteristics were evaluated after eight weeks after in vitro culture. Shoot ratio of 'Seolhyang' apical meristem was 72.9% in 1/3MS medium supplemented with maple sap. On the other hand, the low shoot ratio was observed 47.7% in 1/3MS medium supplemented with banana powder. Shoot length was different as natural additives but numbers of leaf was not significantiy different among the natural additives. As a result, the sprouting ratio and plant growth were enhanced effectively in 1/3MS medium with maple sap compared to the others.

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.585-590
• /
• 2011

The purpose of this research is to suggest economic feasibility of cultivating Acer Mono by using profitability analysis to forest owners. To achieve this research objective, forest owner household survey with intensive cultivating has been conducted about a sap production on its age of tree. And input costs and sap production costs are calculated with silvicultural system from plant to regeneration cutting. Total income is the sum of its sap sales and thinning and regeneration cutting. The method of profitability analysis was used on the NPV(Net Present Value) and IRR(internal rate of return). Finally, when 3% discount rate is applied, NPV is about 59,436 thousand won and IRR value is 9.22% at this point. This result, therefore, proves that cultivating Acer Mono is economical feasibility to forest owners.