• 한국항공운항학회지
• /
• 제13권1호
• /
• pp.43-49
• /
• 2005

There are several ways to mold the complex material, and it is divided to vacuum pack mold, compression mold, and hand lay up for a high molecular substance as a basic material. Moreover, it can be divided to general manufacturing (Single form) and mold manufacturing(Mold form) under normal temperature for Firefly. Firefly was manufactured with hand lay up and general manufacturing that using the foam core, glass fabric, and template without mold. However, mold manufacturing that is producing the surface by semi-sandwich using thin foam core and glass fabric then reinforce the inside with spar and rib is on developing. Mold manufacturing can make easy to production, standardize the quality, and possible to mass producing. In this paper, we present the mold producing process for canard aircraft "Firefly", and the problems and solutions during producing Firefly. Moreover, it complements the defect that the problems caused by master manufacturing error when produce several masters of a large part, and make the manufacturing process to be shortened by the replacement from the supplementary plate to the foam that is installed when producing lay up mold.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1690-1695
• /
• 2007

Lightweight metallic truss structures with open, periodic cell are currently being investigated because of their multi-functionality such as thermal management and load bearing. The Kagome truss PCM has been proved that it has higher resistance to plastic buckling, more plastic deformation energy and lower anisotropy than other truss PCMs. The subject of this paper is an examination of the failure mechanism of Wire woven Bulk Kagome(WBK). To address this issue, the out-of-plane compressive responses of the WBK has been measured and compared with theoretical and finite element (FE) predictions. For the experiment, 2 multi-layered WBK are fabricated and 3 specimens are prepared. For the theoretical analysis, the brazed joints of each wire in WBK are modeled as the pin-joint. Then, the peak stress of compressive behavior and elastic modulus are calculated based on the equilibrium equation and energy method. The mechanical structure with five by five cells on the plane are constructed is modeled using the commercial code, PATRAN 2005. and the analysis is achieved by the commercial FE code ABAQUS version 6.5 under the incremental theory of plasticity.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.276-279
• /
• 2008

In order to measure sound transmission loss (STL) of a shipboard window of small size, a special partition is built into the test opening between two reverberation rooms and the specimen is placed in that partition. For high sound insulation, the filler wall often has multi-layered structure such as double-brick wall or buckhead structure with thick steel plate, absorptive material, and sandwich panels. This paper discusses the installation method of a multi-layered filler wall that consist of gypsum boards, lead plates, and glass wool. The experimental results of various wall structures are introduced. The comparison between the results show that the sound bridge effect plays a significant role in lowering the maximum STL of the filler wall. It is also found that the higher the sound insulation performance of the filler wall is, the more important the franking transmission through other side wall of the test facility is.

• Composites Research
• /
• 제17권3호
• /
• pp.23-28
• /
• 2004

불균등 단면이나 임의의 경계조건을 가진 보나 탑 구조물의 고유진동수를 계산하는 방법은 김덕현에 의해 1960년 후반기에 개발 응용되고 1974년의 한 국제회의에서 발표되었다. 이 논문에는 이 방법을 탄성지지된 3경간연속 철근콘크리트 교량에 적용한 결과가 실려있다. 콘크리트 상판은 특별직교 이방성 판으로 취급되었다. 이 진동해석에 필요한 변위의 영향계수는 여러 방법으로 구할 수 있으나 이 논문에서는 유한차분법이 사용되었다. 기초의 탄성계수와, $D_{22}$, $D_{12}$, $D_{66}$ 강성의 고유진동수에 대한 영향이 철저하게 연구되었다.

• 한국식품조리과학회지
• /
• 제27권4호
• /
• pp.55-65
• /
• 2011

This study was performed to analyze the microbiological hazards of ready-to eat sandwiches and to evaluate the effect of implementing a hazard analysis and critical control points (HACCP) for quality improvement of ready-to-eat sandwiches. In total, 174 samples were examined for the microbiological hazard analysis. About 37.4% of the samples had an aerobic plate count ${\geq}$6 log CFU/g, and the numbers of coliforms exceeded 3 log CFU/g in 82.2% of the samples. Additionally, Staphylococcus aureus, E. coli, and Salmonella spp. were detected in 10.3%, 4.6%, 1.1% of sandwiches, respectively. In contrast, E. coli O157:H7, and Listeria monocytogenes were not detected in any of the samples. The results of the microbiological verification after implementing a HACCP throughout the production process indicated that S. aureus, E. coli, Salmonella spp., E. coli O157:H7, and L. monocytogenes were not detected in any of the samples. Consequently, implementing a HACCP is effective for quality improvement of ready-to-eat sandwiches.

• The Plant Pathology Journal
• /
• 제32권5호
• /
• pp.452-459
• /
• 2016

The genomic region of Grapevine fanleaf virus (GFLV) encoding the movement protein (MP) was cloned into pET21a and transformed into Escherichia coli strain BL21 (DE3) to express the protein. Induction was made with a wide range of isopropyl-${\beta}$-D-thiogalactopyranoside (IPTG) concentrations (1, 1.5, and 2 mM) each for duration of 4, 6, or 16 h. However, the highest expression level was achieved with 1 mM IPTG for 4 h. Identity of the expressed protein was confirmed by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) followed by Western blotting. The expressed 41 kDa protein was purified under denaturing condition by affinity chromatography, reconfirmed by Western blotting and plate-trapped antigen enzyme-linked immunosorbent assay (PTA-ELISA) before being used as a recombinant antigen to raise polyclonal antibodies in rabbits. Purified anti-GFLV MP immunoglobulines (IgGs) and conjugated IgGs detected the expressed MP and GFLV virions in infected grapevines when used in PTA-ELISA, double antibody sandwich-ELISA, and Western blotting. This is the first report on the production of anti-GFLV MP polyclonal antibodies and application for the virus detection.

• Steel and Composite Structures
• /
• 제33권3호
• /
• pp.333-346
• /
• 2019

Foam ceramic materials contribute to the explosion effect weakening on concrete structures, due to the corresponding excellent energy absorption ability. The blast resistance of concrete members could be improved through steel-foam ceramics as protective cladding layers. An approach for the modeling of dynamic response of steel-foam ceramic protected reinforced concrete (Steel-FC-RC) slabs under blast loading was presented with the LS-DYNA software. The orthogonal analysis (five factors with five levels) under three degrees of blast loads was conducted. The influence rankings and trend laws were further analyzed. The dynamic displacement of the slab bottom was significantly reduced by increasing the thickness of steel plate, foam ceramic and RC slab, while the displacement decreased slightly as the steel yield strength and the compressive strength of concrete increased. However, the optimized efficiency of blast resistance decreases with factors increase to higher level. Moreover, an efficient design method was reported based on the orthogonal analysis.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.326-342
• /
• 2022

Comparative analyses of a shield building subjected to a large commercial aircraft impact between decoupling method and coupling method are performed in this paper. The decoupling method is applying impact force time-history curves on impact area of the shield building to study impact damage effects on structure. The coupling method is using a model including aircraft and shield building to perform simulation of the entire impact process. Impact force time-history curves of the fuselage, wing and engine and their total impact force time-history curve are obtained by the entire aircraft normally impacting the rigid wall. Taking aircraft structure and impact progress into account some loading areas are determined to perform some comparative analyses between decoupling method and coupling method, the calculation results including displacement, plastic strain of concrete and stress of steel plate in impact area are given. If the loading area is determined unreasonably, it will be difficult to assess impact damage of impact area even though the accurate impact force of each part of aircraft obtained already. The coupling method presented at last in this paper can more reasonably evaluate the dynamic response of the shield building than the decoupling methods used in the current nuclear engineering design.

• Advances in aircraft and spacecraft science
• /
• 제10권4호
• /
• pp.347-368
• /
• 2023

In the first part of this study, a numerical simulation model was developed using the mechanical APDL software to validate the results of the 3D-elastisity theory on the laminated sandwich plate developed by Panago. The numerical simulation model showed a good agreement to the results of Pagano's theory in terms of deflection, normal stresses, and shear stresses. In the second part of this study, the developed numerical simulation model was used to define different plates dimensions and fibers layup orientations to examine the load response in terms of deflection and stresses. Further analysis was implemented on the natural frequencies of laminated xxx plates of the plates. The layup configurations include Unidirectional (UD), Cross-Ply (CP), Quasi-Isotropic (QI), the linear bio-inspired known as Linear-Helicoidal (LH), and the nonlinear bio-inspired known as Fibonacci-Helicoidal (FH). The following numerical simulation model can be used for the design and study of novel, sophisticated bio-inspired composite structures in a variety of configurations subjected to sinusoidal or constant loads.

• 대한수의학회지
• /
• 제34권3호
• /
• pp.529-536
• /
• 1994

To establish more specific and simple diagnostic methods for detection of the antibodies and antigens of Aujeszky's disease virus(ADV), we designed indirect dot-immunoassay(IDI) and double sandwich dotimmunoassay(DSDI) using the solid phases of nitrocellolose paper and polystyrene plate. The diagnostic efficacy of these methods was investigated. As the sensitivity of IDI was tested by various virus concentration, the specimens with the virus titer above $10^{4.0}TCID_{50}/0.2ml$ showed positive reaction, but that below $10^{1.0}TCID_{50}/ml$ revealed negative. Tonsil emulsion at the virus titer of $10^{4.5}TCID_{50}/0.2ml$ showed the highest sensitivity as diluted by 1/100. In detection of ADV antigens from the various tissues of the rats and pigs infected with ADV, IDI using monoclonal antibody showed the higher specificity as compared with IDI using polyclonal antibody and virus isolation method. The efficacy of the DSDI for detection of ADV antibody was compared with other tests. The sensitivity of DSDI was higher than virus neutralization(VN) and agar gel immunodiffusion test(AGID). Meanwhile, specificity of DSDI was lower than AGID, but similar to IDEA. In comparison with VN test, DSDI showed 96.9% agreement to VN test that is the highest of three tests. In general, application of polyclonal antibody in both tests caused the higher sensitivity but the lower specificty.