• 제목/요약/키워드: Sand wave

검색결과 264건 처리시간 0.031초

공극을 포함한 실리카샌드 시편의 초음파 속도변화 측정 (Measurement of Ultrasonic Wave Velocity Changes in Silica-Sand Specimens with Voids)

  • 김대유;임홍철;조윤진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 춘계 학술논문 발표대회
    • /
    • pp.48-49
    • /
    • 2017
  • In order to examine the effect of voids on the ultrasonic wave velocity, specimens made of Silica-Sand with voids were prepared for the measurements. The volume fraction of 0, 15, and 30% of voids were used to compare the differences. Because of its more homogeneous distribution of materials properties, the Silica-Sand specimens were used, as compared to mortar specimens. The results showed clear change in ultrasonic wave velocity with different volume fraction of voids. This result is to be used for the estimation of the integrity of concrete structures using ultrasonic wave velocity method as nondestructive testing.

  • PDF

탁월파랑에 의한 동해안선 분류의 조사연구 (Astudy on the classification of Eastern Coastal line of korea from the view point of Prevailing Wave Direction)

  • 이원환;이정태
    • 물과 미래
    • /
    • 제11권1호
    • /
    • pp.39-46
    • /
    • 1978
  • The approaching deep water wave heights and directions affect the wave energy which is carried to the coast. By studing the relations between the longshore wave energy theory and the evolution of coastline, writer can arrive following conclusion. The longshore lottoral drifting affects to a great deal the formation of the coast, and by investigating on the eastern coastal geomophorogy of korea, the theory was proued as a true and made it possible to an approaching to the subdivided classification of eastern coast of lorea. That is to asy that angle taken by the level between the wave crest line of prevailing wave(NE) and the coastline was measured as less than 15#, and in the area neighboring the river which served as source of Sand parrticles, there are grand scale formation of sand beach expectable, in the other hand the formation of sand beach in case of $35^{\circ}{\leq}{\alpha }o{\leq}55^{\circ}$ which represents the vivid phenomena of longshore littoral drifting was proved not influencial but rather transformed into a rocky coast. Depending on the above facts the writer classified general shape of the coast affected by the vivid wave action into the following three, (1) The equilibrium beach. (2) Erosinal beach. (3) Geomophorogical beach, and made the sandy and rocky coast are subdivided as S-A.B.C. and R-DEF.

  • PDF

박층 오일샌드 영상화를 위한 다성분 역VSP 탐사 (Multicomponent RVSP Survey for Imaging Thin Layer Bearing Oil Sand)

  • 정수철;변중무
    • 지구물리와물리탐사
    • /
    • 제14권3호
    • /
    • pp.234-241
    • /
    • 2011
  • 오일샌드는 고유가로 인하여 최근 활발하게 탐사 및 개발이 진행되고 있다. 오일샌드는 일반적으로 박층으로 존재하기 때문에 이의 탐지를 위해서는 지표 탄성파탐사보다는 시추공 주변의 고해상도 영상화가 장점인 다성분 VSP 탐사가 효과적이다. 또한 중합전 위상막 구조보정의 경우, 단방향 파동방정식을 이용하기 때문에 다성분 자료를 이용한 영상화에 효과적이다. 이 연구에서는 박층 오일샌드의 영상화를 위하여, 다성분 역VSP 탐사자료를 이용한 중합전 위상막 구조보정의 적용성을 고찰하였다. 중합전 위상막 구조보정에 사용할 다성분 역VSP 탐사자료의 전처리 과정으로 입사각과 회전변환을 이용한 파 분리 방법을 제안하고, 이를 합성탄성파탐사자료를 통하여 검증한 결과 파 분리가 효과적으로 되는 것을 확인하였다. 또한 분리된 P파와 PS파 자료를 이용하여 구조보정을 실시하였을 시, PS파 구조보정 결과가 P파 구조보정 결과보다 넓은 반사면의 영상화가 가능하고 고해상도의 영상을 획득하였다. 그리고 캐나다 오일샌드 매장지역을 모사한 합성탄성파탐사자료를 생성하고 이를 영상화 한 결과, P파 구조보정 결과보다 PS파를 이용한 구조보정 결과가 박층 오일샌드의 상 하부 경계면을 정확하게 영상화하였다.

Shear wave velocity of fiber reinforced cemented Toyoura silty sand

  • Safdar, Muhammad;Newson, Tim;Schmidt, Colin;Sato, Kenichi;Fujikawa, Takuro;Shah, Faheem
    • Geomechanics and Engineering
    • /
    • 제25권3호
    • /
    • pp.207-219
    • /
    • 2021
  • Several additives are used to enhance the geotechnical properties (e.g., shear wave velocity, shear modulus) of soils to provide sustainable, economical and eco-friendly solutions in geotechnical and geo-environmental engineering. In this study, piezoelectric ring actuators are used to measure the shear wave velocity of unreinforced, fiber, cemented, and fiber reinforced cemented Toyoura sand. One dimensional oedometer tests are performed on medium dense specimens of Toyoura sand-cement-fiber-silica flour mixtures with different percentages of silica flour (0-42%), fiber and cement (e.g., 0-3%) additives. The experimental results indicate that behavior of the mixtures is significantly affected by the concentration of silica flour, fiber and cement additives. Results show that with the addition of 1-3% of PVA fibers, the shear wave velocity increases by only 1-3%. However, the addition of 1-4% of cement increases the shear wave velocity by 8-35%. 10.5-21% increase of silica flour reduces the shear wave velocity by 2-5% but adding 28-42% silica flour significantly reduces the shear wave velocity by 12-31%. In addition, the combined effect of cement and fibers was also found and with only 2% cement and 1% fiber, the shear wave velocity increase was found to be approximately 24% and with only 3% cement and 3% fibers this increased to 35%. The results from this study for the normalized shear modulus and normalized mean effective stress agree well with previous findings on pure Toyoura sand, Toyoura silty sand, fiber reinforced, fiber reinforced cemented Toyoura sand. Any variations are likely due to the difference in stress history (i.e., isotropic versus anisotropic consolidation) and the measurement method. In addition, these small discrepancies could be attributed to several other factors. The potential factors include the difference in specimen sizes, test devices, methods of analysis for the measurement of arrival time, the use of an appropriate Ko to convert the vertical stresses into mean effective stress, and sample preparation techniques. Lastly, it was investigated that there is a robust inverse relationship between α factor and 𝞫0 exponent. It was found that less compressible soils exhibit higher 𝜶 factors and lower 𝞫0 exponents.

고결된 Engineered Soils의 탄성파 특성 (Elastic Wave Characteristics in Cemented Engineered Soils)

  • 이창호;윤형구;이우진;이종섭
    • 한국지반공학회논문집
    • /
    • 제24권2호
    • /
    • pp.87-97
    • /
    • 2008
  • 단단한 모래 입자와 연약한 고무 입자로 이루어진 Engineered soils을 고결화 시킨 후 $K_o$ 상태에서의 거동 특성을 분석하였다. 고결화 효과에 따른 영향 및 모래부피비에 따른 영향을 파악하기 위하여 다양한 모래부피비를 가지는 비고결화 및 고결화 시료를 준비하여, 수직 응력에 따른 변형 및 탄성파 속도를 측정하였다. 탄성파 속도 측정은 벤더 엘리먼트와 PZT 엘리먼트를 이용하였다. 고결화 이 후 응력에 따른 수직 변형율의 기울기는 이중 선형 관계를 보이며 고결화 결합 파괴 이후에는 비고결화 시료와 비슷한 기울기를 가진다. 정규화된 수직 변형량은 응력에 따라 capillary force, cementation, decementation 구간으로 나눌 수 있다. 근접장 내에서 측정된 전단파 신호의 첫 번째 움직임은 압축파의 도달과 일치하였다. 고결화에 의해 탄성파 속도는 수직 응력의 증가 없이 급격한 증가를 보였으며, 고결화 이후 추가적인 응력 증가에도 일정한 값을 보였다. 고결화 파괴 후 지속적인 수직 응력의 증가에 따라 탄성파속도는 증가하였다. 고결화는 비고결화 시료에서 나타나는 유사고무, 유사모래, 전이 3가지의 거동을 방해한다. 고무-모래 혼합재의 고결화 결합의 파괴 메커니즘은 모래부피비에 따라 다르며 낮은 모래부피비의 시료는 입자 모양의 변화가, 높은 모래부피비 시료에서는 입자 구조의 변화가 고결화 결합의 파괴가 주요한 원인이다. 본 연구를 통해 연약한 고무 입자와 단단한 모래 입자의 혼합재인 Engineered soils의 거동은 고결화 및 고결화 파괴에 따라 비고결화 시료와 구분됨을 알 수 있었다.

남해 Sand ridge 퇴적물의 퇴적상과 물리적 특성 (Physical Properties and Facies of the Sand Ridge Sediment, South Sea of Korea)

  • 천희정;서영교;김대철;김정창
    • 한국수산과학회지
    • /
    • 제31권5호
    • /
    • pp.609-621
    • /
    • 1998
  • 1. 연구지역내 sand ridge들은 10$\~$20 m 높이의 비대칭형태이며, 등수심선과 평행하게 발달해 있고, sand ridge의 경사진 부분에서는 지역에 따라 sand wave 형태의 이미지가 나타나는 것으로 보아 현재 다소 활동성이 있는 것으로 보인다. 2. Ridge 주변 위치별 입도, 물리적 성질, 음파전달속도 값은 차이가 크지 않았는데, 이것은 본 연구지역의 주 퇴적상인 사질의 퇴적층이 판의 형태로 넓게 분포하고 있기 때문이다. 3. 코어 하부에는 해수면이 상승하면서 생성된 transgressive sand sheet 퇴적상의 특징을 지시하는 40$\~$200cm 두께의 자갈, 패각편, 조립사가 혼재된 퇴적상이 나타난다. 이들 사질의 분급이 양호하지 않은 이유는 해수면이 상승하면서 조류나 고에너지 환경에서 재동(reworking)되어 퇴적된 palimpsest와 관련된 것으로 사료된다.

  • PDF

Polarograph 에 依한 Monazite 鑛石속의 Uranium 의 定量에 關한 硏究 (Determination of Uranium in Monazite Sand by Polarographic Method)

  • 김황암;손병영
    • 대한화학회지
    • /
    • 제5권1호
    • /
    • pp.84-87
    • /
    • 1961
  • A polarographic method for rapid determination of Uranium in the presence of foreign ions was proposed. The method is based on the measurement of polarogram in the sulfuric acid as supporting electrolyte. In this medium Uranyl ions give well defined reduction waves, and half-wave potentials are -0.19V vs. S.C.E. as first wave, and uncertain volt. vs. S.C.E. as second wave in $2.4 N-H_2SO_4.$ The first wave has a linear relationship between the concentration of Uranyl ion and wave height. The author also studied a method for rapid determination of Uranium in Korean monazite sand without eliminating the foreign ions. The Korean monazite sands were analyzed by this method and satisfactory result were obtained.

  • PDF

하구사주의 생성 및 발달을 해석하기 위한 수치모델의 개발 (Development of a Numerical Model to Analyze the Formation and Development Process of River Mouth Bars)

  • 김연중;우정운;윤종성;김명규
    • 한국해안·해양공학회논문집
    • /
    • 제33권6호
    • /
    • pp.308-320
    • /
    • 2021
  • 해안침식의 근본적 대책으로서 감소한 공급 토사량 회복을 포함한 종합 토사관리 대책이 유효하지만, 계획에 있어서는 하천에서 바다로 유출된 토사 가운데 어느 정도의 양이 어느 정도의 속도로 해안에 다시 공급되는 토사량의 평가와 이를 위해서는 하천과 바다의 결절점인 하구지역에서 발생하는 토사의 이동 메커니즘 분석이 매우 중요하다. 하지만 지금까지 홍수 시의 하구사주 붕괴(flushing) 과정을 해석하는 수치모델에 관한 연구는 진행되고 있지만 하구사주의 형성 및 발달 과정을 해석하는 수치모델은 아직 확립되어 있지 않은 것이 현재의 연구 진행상태이다. 본 연구에서는 종합토사관리를 위해 유출된 토사가 회복되는 토사량의 평가를 위해 파랑변형, 유황계산 및 지형변화 모델을 구축하여 하구사주의 생성과정을 수치해석을 통한 재현을 목적으로 한다. 하구사주의 생성과정을 모의하였으며 에너지 파랑 및 작용 시간의 개념을 도입하여 장기간 표사이동의 예측을 실시하였다. 계산에 필요한 외력조건은 하구사주가 지배적으로 발달하는 동계시 작용하는 파랑조건과 하천의 유량을 고려하였으며 초기지형은 홍수시 마읍천의 하구사주가 붕괴(flushing)된 직후의 지형정보를 초기조건으로 설정하였다. 그 결과 입사파향에 따라 해빈류에 의해 하구사주의 발달과 생성과정을 재현하였으며 초기지형으로부터 약 66시간 경과 후 맹방하구 사주의 형태로 발달되는 것으로 나타났다.

해안침식 현장 적용을 위한 인공산호초 연성공법의 파고 감쇠 및 침식해빈사 포집성능 분석 (Study on Wave Reduction and Beach sand Capture Performance of Artificial Coral Reefs for In-situ Application)

  • 홍성훈;김태윤;최윤식;김정호;권용주;이시현;이광수;권순철
    • 한국해양공학회지
    • /
    • 제32권6호
    • /
    • pp.485-491
    • /
    • 2018
  • Because of the increase in coastal erosion problems, many studies have been conducted to prevent coastline retreat by developing low-cost, highly effective countermeasures. We developed the artificial coral reefs (ACRs) method as part of this research trend. To verify its coastal protection performance, we carried out performance tests on its wave attenuation and beach sand capture ability, which are the key barometers for this newly developed technology. In this study, three different types of methods, including natural beach, TTP, and ACRs, were used to determine the coastal protection efficiency under both ordinary and storm wave conditions. Based on the results of this study, ACRs were found to have the best wave attenuation performance and captured more than 20% of the total erosion area. This means the ACR method can be applied as a reliable countermeasure to protect a coastal zone.

Comparisons of the Environmental Characteristics of Intertidal Beach and Mudflat

  • Kim, Tae-Rim
    • 대한원격탐사학회지
    • /
    • 제25권3호
    • /
    • pp.225-231
    • /
    • 2009
  • The characteristics of morphological shapes, wave heights, tidal ranges and sediment sizes are observed and compared between intertidal beach and mudflat. The Mohang sand beach, southwest coast of Korea, is located just next to the large mudflat and has tidal range over 5 meters. Wave measurements are conducted at each entrance of the beach and mudflat as well as at the outside waters representing the incident waves to these different coastal environments. The morphological characteristics are also examined including the sediment size and the slope of the bathymetry, For the observation of morphological shapes, camera monitoring technique is used to measure the spatial information of intertidal bathymetry. The water lines moving on the intertidal flat/beach durinq a flood indicate depth contours between low and high water lines. The water lines extracted from the consecutive images are rectified to get the ground coordinates of each depth contours and integrated to provide three dimensional information of intertidal topography. The wave data show that sand beach is in the condition of severer wave forcing but tidal range is almost identical in both environment. The slope of the mudflat is much milder than the sand beach with finer sediment.