• Economic and Environmental Geology
• /
• v.12 no.1
• /
• pp.1-12
• /
• 1979

A model study was conducted for the interpretation of simple geologic structures. Experiments were carried out for the cases of two horizontal beds and dipping beds in a water tank by using Wenner and Schlumberger arrays respectively. As a geologic stratum of experimental model, cement be (cement: sand=1:2) of $70cm{\times}60cm{\times}10cm$ was used. It was found out from a preliminary experiment that a measuring sounding of Wenner arrays is one third of the distance between two current electrodes, and Schlumberger arrays is one fourth of the distance which is a half of the value determined by usual method of calculation. Equi-resistivity curves were obtained for the cases of horizontal beds and dipping beds, and mapped on the longitudinal and cross sections of the water tank. These curves delineate the shape and degree of dip of bed to some extent. The calculation of depth to beds by using a master curve is somewhat complicated and inexact. In this study, new method for this calculation using a ${\rho}_a/{\rho}_1-a$ graph was proposed, and turned out that this method is simpler and exact.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2001.09a
• /
• pp.94-103
• /
• 2001

An experiment was conducted using a sand and gravel-filled tank model, to investigate the influence on the GPR response of vadose zone gasoline vapor phase effects and residual gasoline distributed by a fluctuating water table. After background GPR measurements were made with only water in the tank, gasoline was injected into the bottom of the model tank to simulate a subsurface discharge from a leaking pipe or tank. Results from the experiment show the sensitivity of GPR to the changes in the moisture content and its effectiveness for monitoring minor fluctuation of the water table. The results also demonstrate a potential of GPR for detecting possible vapor phase effects of volatile hydrocarbons in the vadose zone as a function of time, and for detecting the effects of residual phase of hydrocarbons in the water saturated system. In addition, the results provide the basis for a strategy that has the potential to successfully detect and delineate LNAPL contamination at field sites where zones of residual LNAPL in the water saturated system are present in the subsurface.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.3
• /
• pp.3096-3106
• /
• 1973

As a link in the chain of antidrought measure, our attempt is made to obtain basic informations on the construction of an infiltration gallary which can be supplied with irrigation water by catching of underground water in small river beds, which is economical, permanent and efficient. The experiment was made, concerning the structure of catchment conduits, by constructing a model sand tank $1.5m{\times}5m{\times}1.5m$ in dimension made of reinforced concrete. Various kinds of measuring equipment were attached to the model tank which contains a set of catchment conduits, each of them was made 30cm in diameter and 60cm in length with the ratio of sectional area to total area of influx holes 10:1, 20:1, 30:1. The average size of influx holes was fixed from 0mm to 10mm, 20mm and 30mm in diameter respectively. Obtained results are as follow; (a) In view of the water catchment capacity, manufacturing cost and the antipressure strength of the catchment conduits, it is the best method to decide the total number of influx holes 20 per sq. meter of each tile surface, and the size of influx holes 20mm in diameter, when the conduits have diameter less than 1m. (b) The greatest factor of safety against external load is to arrange the influx holes in a zigzag manner on the tile surface. The most effective formula of arrangement is $S{\geqq}\sqrt{2gd}$ where: s : spacing of opening row. g : spacing of opening line. d : diameter of influs hole.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.41-48
• /
• 2004

Several centrifuge modelling tests were performed to compare sand compaction pile (SCP) with gravel compaction pile (GCP) at the point of bearing capacity. SCP and GCP were installed as 30, 40, 50, 60, 70% of replacement ratio in cylindrical model tank (diameter = 20 cm, height = 40 cm), and the loading tests were carried out to analyze the bearing characteristics of soft clay ground reinforced by SCP and GCP. As a result of loading tests, the bearing capacities of soft grounds reinforced by SCP and GCP increase with increasing replacement ratio of pile, and a GCP reinforced ground has larger bearing capacity than that of a SCP reinforced ground. Several proposed bearing capacity equations for ground reinforced by SCP or GCP were compared with loading test results.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.2
• /
• pp.183-187
• /
• 2011

As larger the commercial vessel is, and rougher the marine environment becomes nowadays, drag embedment type anchor (DEA) of more stable performance and higher holding power is requested to be applied on the vessel. But, the performance of DEA has not become well known to academy and industries so far, that the basic study of DEA performance and holding force for the development of new DEA of higher performance is insufficient that required. In this paper, three types of same holding category DEA model (HALL, AC-14, POOL-N, scale 1/10), which are generally applied on the commercial vessel nowadays, were tested by being horizontally dragged on the test tank, on which sand was being floored with sufficient depth, and measured the holding force of each anchor simultaneously using load cell and D/A converter. With the test results, the embedding motion was analyzed to have three different stages and the holding force of each anchor was analyzed with respect to the anchor geometry, such as shape and weight of each type of anchors, and final embedding depth.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5B
• /
• pp.483-489
• /
• 2011

In this study, the coupled-numerical model has been newly developed to investigate numerically scouring and deposition around a coastal structure like a submerged breakwater using a numerical wave model and a lagrangian particle model for sand transport. As a numerical wave model, LES-WASS-2D (Hur and Choi, 2008) is adopted. The model is able to consider the flow through a porous midium with inertial, laminar and turbulent resistance term and determine the eddy viscosity with LES turbulence model. Distinct element method (Cundall and Strack, 1979), which is able to apply to many dynamical analysis of particulate media, as a lagrangian particle model for sand transport is newly coupled to the numerical wave model. The numerical simulation has been carried out to examine the scour problem in front of an impermeable submerged breakwater using the newly coupled-numerical model. The numerical results has been compared qualitatively with an existing experimental data and then its applicability has been discussed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.4
• /
• pp.255-265
• /
• 1991

In order to find the excavating performance of water-jet nozzle on the sand, the authors were carried out the excavating experiment with the model nozzles which were semi circular sectioned nozzles and rectangular nozzle in water tank. The results were as follows. 1) Excavating maximum depth and width on the sand by the water jet were straightly increased in proportion to the velocity of water jet and the section area of nozzle, and that, by the nozzle distance from the excavating point on the sand, the depth was decreased, while the width was increased straightly. 2) Rectangular nozzle which the thick of hole is 1mm, was a little bit better than the circular nozzle of the same sectioned area on the excavating performance. 3) Empirical equations between the velocity of water jet, the distance of nozzle, and the maximum excavating depth and width by angle of nozzle were expressed as linear, they were as follows on the 45$^{\circ}$ angle of the rectangular nozzle(1$\times$12mm); D=0.0093V sub(0)-0.23H+5.7. W=0.0147V sub(0)+1.06H+10.2. where, D is the maximum excavating depth(cm), W is the maximum excavation width(cm), V sub(0) is the velocity of water jet(cm/s); 926$\leq$V sub(0)$\leq$1504, H is the distance(cm) from nozzle tip to water-jetted point on the surface of sand.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.299-306
• /
• 2001

Crushed Stone Pile(CSP) is one of the ground improvement methods available to loose sand and clayey ground by forming compacted CSP in the weak soil layer. The effects of this method are enhancement of ground bearing capacity, reduction of settlement and prevention of lateral ground movement in cohesive layer, reduction of liquefaction potential in sandy ground. This study performs model tests in 1.0m${\times}$1.0m${\times}$1.0m and 1.5m${\times}$1.5m${\times}$l.2m model tank to observe bearing capacity of CSP treated ground. The area replacement ratio of CSP composite ground varies 20%, 30% and 40% with square grid pattern. After the composite ground was consolidated under pressure of 0.5kg/$\textrm{cm}^2$ and 1.0kg/$\textrm{cm}^2$, load tests were carried out. The results show that ultimate bearing capacity increases with area replacement ratio and the preconsolidation pressure of ground.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.2
• /
• pp.101-104
• /
• 1996

The pressure field for the Pekeris model which is consisted of a surface layer of fresh water overlying a thick (essentially semi-infinite) bottom layer of coarse sand is investigated experimentally in a anechoic tank scaled down 1/1,000. The water depth and frequency have been controlled so that the continuous mode integrand has not a resonance close to cut-off, and the experimental results relatively well agree with the theory which is represented as the sum of the discrete modes over a range about 10 times the water depth.

• Journal of Urban Science
• /
• v.12 no.2
• /
• pp.53-64
• /
• 2023

With the development of the plant industry, there has been an increasing frequency of major accidents both domestically and internationally, emphasizing the importance of plant safety. Therefore, this study aims to investigate measures to enhance the stability of piping, a key component within the plant. Upon examining the piping, erosion, buckling, and fatigue emerged as significant risk factors among various potential hazards, leading to their selection as the primary risk factors in this study. Identifying variables that can collectively mitigate these factors, the study focuses on the material, thickness, and elbow angle of the piping. The reference piping model is established as the pipeline connecting the Skim Tank and IGF within a 300BPD oil sands modular plant in Yeoncheon, Gyeonggi-do. Utilizing the FEA analysis program ANSYS, the study conducts a variable analysis for the identified risk factors. The results of the analysis, through comparison and evaluation, provide evidence of the effectiveness of enhancing stability. It is observed that reducing the elbow angle significantly improves erosion and buckling, while changing to a material with high yield stress most significantly enhances stability when considering fatigue.