• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.289-294
• /
• 2002

Sand Compaction Pile (SCP) method, which uses sand material, is frequently used in Korea. However, the use of sand for SCP faces environmental and economical problems with the shortage of its resources. Therefore, it is necessary to substitute other materials for compaction piles. One of the alternatives is using gravel in lieu of sand. Granular Pile, constituted with sand and crushed-stone, is one of the methods to improve soft clay and loose sandy ground. In this study, modeled pile load tests are performed in test cell. The observations are made on the consolidation and the variation of water table of three different grounds, original, sand pile installed, and granular pile installed ground. In addition, engineering characteristics such as bearing capacity, settlement and drainage are investigated. The test results show that Gravel Compaction Pile (GCP) is more efficient for increasing bearing capacity and reducing settlement than SCP and had similar pore water pressure dissipation to sand. Therefore, the results show that GCP can be a good substitution for SCP.

• Geomechanics and Engineering
• /
• 제10권5호
• /
• pp.599-615
• /
• 2016

The present research presents experimental and finite element studies to investigate the behavior of piled raft-tunnel system in a sandy soil. In the experimental work, a small scale model was tested in a sand box with load applied vertically to the raft through a hydraulic jack. Five configurations of piles were tested in the laboratory. The effects of pile length (L), number of piles in the group and the clearance distance between pile tip and top of tunnel surface (H) on the load carrying capacity of the piled raft-tunnel system are investigated. The load sharing percent between piles and rafts are included in the load-settlement presentation. The experimental work on piled raft-tunnel system yielded that all piles in the group carry the same fraction of load. The load carrying capacity of the piled raft-tunnel model was increased with increasing (L) for variable (H) distances and decreased with increasing (H) for constant pile lengths. The total load carrying capacity of the piled raft-tunnel model decreases with decreasing number of piles in the group. The total load carrying capacity of the piles relative to the total applied load (piles share) increases with increasing (L) and the number of piles in the group. The increase in (L/H) ratio for variable (H) distance and number of piles leads to an increase in piles share. ANSYS finite element program is used to model and analyze the piled raft-tunnel system. A three dimensional analysis with elastoplastic soil model is carried out. The obtained results revealed that the finite element method and the experimental modeling are rationally agreed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.525-532
• /
• 2004

Among soft ground treatment methods with granular soil used in domestic, the sand compaction pile method has been utilized greatly, but, as a result of exhaustion of sand and increase of unit cost, a necessity of an alternative method is suggested. In this study, the static load tests for crushed-stone compaction piles which were constructed on test field were performed. Based on test results, stress concentration ratios between the crushed-stone compaction pile and the soft ground were investigated and estimated. The stress concentration ratio was the range of 1.7 to 3.0 and the higher it was the more replacement rate was increased.

• Geomechanics and Engineering
• /
• 제32권4호
• /
• pp.397-409
• /
• 2023

This study examines two traditional approaches (non-linear elastic and elasto-plastic) in association with 2D and 3D FEM analyses of a box-section pile embedded in sand. A particular emphasis is placed on stress singularities concerning both reentrant corners of the pile section and the resulting tension zones. From the experience gained in this study, non-linear elastic soil models are less restrictive when one considers stress singularities and their possible effects on convergence of the solution. At least for monotonic loading, when compared with field tests, non-linear elastic models yield better results than the plasticity ones. On the other hand, although elasto-plastic models are not limited to monotonic loading, they are much more sensitive to stress singularities. For this reason, a spherical elastic region is necessary at the pile tip to ensure convergence. Without this region, one must artificially impose an apparent cohesion to limit the tension stresses within a sand medium.

• 한국지반공학회논문집
• /
• 제23권5호
• /
• pp.101-110
• /
• 2007

말뚝의 형상이 비배토말뚝의 지지력에 미치는 영향을 규명하기 위하여 가압토조와 형상이 다른 세개의 모형말뚝을 이용해서 일련의 모형말뚝재하시험을 수행하였다. 시험결과에 따르면 테이퍼말뚝의 지지력은 지반의 응력상태와 상대밀도 뿐만 아니라 말뚝의 테이퍼 각도에도 영향을 받는 것으로 나타났다. 그리고 모형시험의 결과에 근거해서 비배토말뚝의 지지력을 예측할 수 있는 새로운 지지력 산정식을 제안하였으며, 그 제안식에는 말뚝의 테이퍼 각도가 지지력에 미치는 영향이 반영되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 봄 학술발표회 논문집
• /
• pp.43-58
• /
• 1994

In this reaserch, the comparison between numerical results and field measurments including settlement, heaving and lateral displacement, in the interchange construction works on soft ground. Sand drain was performed for the improvement of the site and steel pipe piles driven for the pier foundation of interchange. The steel pipe piles were replaced to the equivalent steel sheet pile wall. Biot's equation was coupled with elasto-viscoplastic model for the multi-purpose program of soft foundation. Finally countemeasures for future possible lateral displacement and settlement were exmanined.

• 한국지반환경공학회 논문집
• /
• 제11권7호
• /
• pp.5-14
• /
• 2010

모래다짐말뚝(Sand Compaction Pile, 이하 SCP)으로 개량된 연약점토지반의 침하량 해석시, 근사법을 이용한 해석에서 응력분담비의 불확실성에 의해 발생되는 영향을 줄이고자, 유한요소해석 프로그램을 이용한 수치해석을 수행하였다. 모래다짐말뚝이 타설된 실내 모형압밀실험을 수행하였고, 이를 유한요소 프로그램으로 수치해석을 하였다. 실내실험과 같은 침하량을 도출하기 위해 역해석을 통한 혼합지반의 압축지수($C_c$)를 추정하고, 추세선을 활용하여 설계압축지수를 산정하는 식을 제시하였다. 또한, 이식을 치환율 45%인 현장에 적용하여 현장 적용성을 검증하였다.

• 한국철도학회논문집
• /
• 제9권4호
• /
• pp.493-498
• /
• 2006

In this study, two large pile load tests were performed in the deep sand gravel deposit of Nakdong river basin so that the characteristics of the load transfer was identified. The fully instrumented rectangular barrette pile in the size of $1.5\times3.0m$ and the circular bored pile of the diameter 1.5 m were placed into the ground below 50 m. Under the applied loads of 2,400 tonf and 4,000 tonf, the test results of the load transfer showed the portion of 83% and 93% of the applied loads on the barrette pile and the bored pile, respectively, were supported by the skin friction along the pile shaft. It was revealed that the most of these skin friction mobilized in sand layer underlying clay layer having N-value more than 30 and that the friction per unit area of the bored pile was larger than the friction of barrette pile. However, if embedded in the stiff sand graval layer, the both piles were proven to be sufficient for using as the friction piles.

• 한국지반공학회논문집
• /
• 제20권7호
• /
• pp.183-196
• /
• 2004

모래다짐말뚝은 압밀침하촉진과 지지력향상을 도모할 수 있는 연약지반 개량공법으로 그 사용성이 증가하고 있다. 본 연구에서는 실내시험과 3-D 유한요소해석을 수행하여 $30-40\%$의 저치환율 모래다짐말뚝의 하중전이특성을 고찰해본다. 또한, 이러한 연구결과는 실험치와의 검증을 통하여 모래다짐말뚝 하중전이특성평가를 위한 간편법을 제시하는데 사용되었다.

• 한국지반신소재학회논문집
• /
• 제16권4호
• /
• pp.1-11
• /
• 2017

본 연구에서는 헬리컬 파일의 관입시간과 극한하중에 관한 연구를 진행하고자 1/6 축소모형 실험을 진행하였다. 균질한 상대밀도의 사질토 지반을 형성하기 위하여 강사법을 사용하였다. 실험 조건으로 헬리컬 파일의 나선형 원판(heilx plate) 간격을 50mm와 150mm 두 Type으로 제작하였고, 헬리컬 파일의 회전관입 시 회전속도를 15rpm과 30rpm으로 진행하였다. 관입 완료된 헬리컬 파일에 콘 장비를 항타하여 관입하였다. 콘 장비 관입으로 헬리컬 파일의 극한하중 증가와 폐색의 정도를 확인 할 수 있었다. 위의 실험 결과를 토대로 헬리컬 파일의 관입시간은 "회전속도 30rpm-나선형 원판 간격 50mm"에서 단축 되었고, 극한하중은 "회전속도 30rpm-나선형 원판 간격 150mm-콘 장비 유"인 조건에서 높은 극한하중을 보였다.