DOI QR코드

DOI QR Code

Estimation of Bearing Capacity of Non-Displacement Piles in Sand Considering Pile Shape

모래지반에서 말뚝형태를 고려한 비배토말뚝의 지지력 산정

  • 백규호 (관동대학교 토목공학과) ;
  • 이준환 (연세대학교 사회환경시스템공학부) ;
  • 김대홍 (한국전력공사 전력연구원)
  • Published : 2007.05.31

Abstract

In order to investigate the effect of the pile shape on the bearing capacity of non-displacement piles, a series of model pile load tests were performed using a calibration chamber and three model piles with different shape. Results of the model tests showed that the bearing capacity of tapered piles was affected by its taper angle as well as the stress states and relative density of soil. Based on the results of model pile load tests, a new design equation for estimation of the bearing capacity of non-displacement piles was proposed, and it takes into account the effect of the taper angles on the bearing capacity of non-displacement piles.

말뚝의 형상이 비배토말뚝의 지지력에 미치는 영향을 규명하기 위하여 가압토조와 형상이 다른 세개의 모형말뚝을 이용해서 일련의 모형말뚝재하시험을 수행하였다. 시험결과에 따르면 테이퍼말뚝의 지지력은 지반의 응력상태와 상대밀도 뿐만 아니라 말뚝의 테이퍼 각도에도 영향을 받는 것으로 나타났다. 그리고 모형시험의 결과에 근거해서 비배토말뚝의 지지력을 예측할 수 있는 새로운 지지력 산정식을 제안하였으며, 그 제안식에는 말뚝의 테이퍼 각도가 지지력에 미치는 영향이 반영되었다.

Keywords

References

  1. 백규호, 이준환, 김대홍 (2006a), '모래지반에 현장타설된 테이퍼 말뚝의 연직거동 특성', 한국지반공학회논문집 (심사중)
  2. 백규호, 이준환, 김대홍 (2006b), '모래지반에서 테이퍼 각도가 테이퍼말뚝의 연직거동에 미치는 영향', 한국지반공학회논문집 (심사중)
  3. 한국전력 (2006), 가공송전용 강관주 철탑기초 설계기준 수립연구, 한국전력
  4. Canadian Geotechnical Society (1992), Canadian foundation engineering manual, 3rd Ed., pp.283-289
  5. EI Naggar, M. H. and Wei, J. Q. (1999), 'Axial Capacity of Tapered Piles Established from Model Tests', Canadian Geotech. J., Vol.36, pp.1185-1194 https://doi.org/10.1139/cgj-36-6-1185
  6. EI Naggar, M. H. and Sakr, M. (2000), 'Evaluation of Axial Performance of Taper Piles from Centrifuge Tests', Canadian Geotech. J., Vol.37, pp.1295-1308 https://doi.org/10.1139/cgj-37-6-1295
  7. Houlsby, G. T. and Hitchman, R. (1988), 'Calibration Chamber Tests of a Cone Penetrometer in Sand', Geotechnique, Vol.38, No.1, pp.39-44 https://doi.org/10.1680/geot.1988.38.1.39
  8. Kodikara, J. K. and Moore, I. D. (1993), 'Axial Response of Tapered Piles in Cohesive Frictional Ground', J. of Geotech. and Geoenvir. Eng., ASCE, Vol.119, No.4, pp.675-694 https://doi.org/10.1061/(ASCE)0733-9410(1993)119:4(675)
  9. Kulhawy, F. H. (1991), 'Drilled Shaft Foundations', Foundation Engineering Handbook, 2nd ed., pp. 537-552
  10. Kulhawy, F. H., Trautmann, C. H., Beech, J. F., O'Rourke, T. D., McGuire, W., Wood, W. A. and Capano, C. (1983), Transmission Line Structure Foundations for Uplift-Compression Loading, Report EL-2870, Electric Power Research Institute
  11. Ladanyi, B. and Guichaoua, A. (1985), 'Bearing Capacity and Settlement of Shaped Piles on Permafrost', 11th Int. Conf. on Soil Mech. and Found. Eng., Vol.4, pp.1421-1427
  12. Lee, J. H. and Salgado, R. (2000), 'Analysis of Calibration Chamber Plate Load Tests', Canadian Geotechnical J., Vol.37, No.1, pp.14-25 https://doi.org/10.1139/cgj-37-1-14
  13. Norlund, R. L. (1966), 'Bearing Capacity of Piles in Cohesionless soils', J. of Soil Mech. and Found. Eng. Div., Vol.89, No.SM3, pp.1-34
  14. Price, R., Rollins, K. M. and Keane, E. (1992), 'Comparison of Measured and Computed Drilled Shaft Capacities Based on Utah Load Tests', Transportation Research Record, 1336, 57-64
  15. Rollins, K. M., Clayton, R. J., Mikesell, R. C. and Blaise, B. C. (2005), 'Drilled Shaft Side Friction in Gravelly Soils', J. of Geotech. and Geoenvir. Eng., ASCE, Vol.131, No.8, pp.987-1003 https://doi.org/10.1061/(ASCE)1090-0241(2005)131:8(987)
  16. Rybnikov, A. M. (1990), 'Experimental Investigation of Bearing Capacity of Bored-Cast-In-Place Tapered Piles', Soil Mech. and Found. Eng., Vol.27, No.2, pp.48-52 https://doi.org/10.1007/BF02306100
  17. Sakr, K., El Naggar, M. H. and Nehdi, M. (2004), 'Load Transfer of FRP Composite Tapered Piles in Dense Sand', Canadian Geotech. J., Vol.41, pp.70-88 https://doi.org/10.1139/t03-067
  18. Salgado, R., Mitchell, J. K., and Jamiolkowski, M. (1998), 'Calibration Chamber Size Effects on Penetration Resistance in Sand', J. of Geotech. and Geoenviron. Eng., ASCE, 124(9), 878-888 https://doi.org/10.1061/(ASCE)1090-0241(1998)124:9(878)
  19. Trautmann, C. H. and Kulawy, F. H. (1987), CUFAD-A Computer Program for Compression and Uplift Foundation Analysis and Design, Report EL-4540-CCM, Vol.16, Electric Power Research Institute
  20. Vesic, A. S. (1975), 'Bearing Capacity of Shallow Foundations', Foundation Engineering Handbook, 1st ed., pp.121-147
  21. Wei, J. and EI Naggar, M. H. (1998), 'Experimental Study of Axial Behavior of Tapered Piles', Canadian Geotech. J., Vol.35, pp.641-654 https://doi.org/10.1139/cgj-35-4-641
  22. Zil'berberg, S.D. and Sherstnev, A.D. (1990), 'Construction of Compaction Tapered Pile Foundation', Soil Mech. and Found Eng., Vol.27, No.3, pp.96-101 https://doi.org/10.1007/BF02306664