• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.420-429
• /
• 2002

The amount of $CO_2$-silicate bonded waste foundry sand(WFS) occurred in Korea is over 800,000 ton per year. WFS, as a by-product, is generated through manufacturing process of foundry may affect our environmental contamination, The reason is that WFS has been buried itself not less than 90％ out of total WFS. So, it can give damage on the ground of contamination in soil and underwater. Therefore, it is necessary to establish the method recycling WFS because of being intensified waste management law. In this study, we performed the research with respect to harmful component analysis, the qualities of WFS mortar and concrete mixed with WFS. As the results the specific gravity of WFS is the same as that of natural aggregate while unit weight and percentage of solids of WFS are smaller than those of it. But it is found that WFS can be used by substituting WFS for natural aggregate after control of poor grade of WFS. The flowability of mortar and concrete with WFS is inferior to those of natural aggregate, and the setting time of concrete with WFS is faster than that with only natural aggregate, On the contrary, the bleeding of concrete with WFS is shown good result, and compressive and tensile strength of concrete substituted WFS for 30％ are higher than those with only natural aggregate regardless of elapsed time.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.5
• /
• pp.334-341
• /
• 2013

Studies were carried to evaluated the influence of storage method by temperatures and fillers on yield and quality of seed rhizome in turmeric. Seed rhizome was stored at styrofoam box filled with rice hull and sand (3:1) or vermiculite for 30, 60 and 90 days at different temperatures (5, 10 and $15^{\circ}C$. compared to traditional method (rhizome only). Parameters were obtained for weight loss, cold injury, percentage of decayed in stored rhizome during storage periods. Also, the germination, growth pattern and yield from stored rhizome has been investigated. It was confirmed that storage of turmeric in stored with filled with vermiculite helps in prevention of rhizomes from microbial and fungal attack. The storage of rhizomes in styrofoam box without any filler at low temperature below $10^{\circ}C$. is not advocated due to heavy losses weight and decayed in management of postharvest for turmeric rhizome. Germination percentage, growth pattern and yield was maximum for rhizomes stored at styrofoam box filled with vermiculite for 90 days at $15^{\circ}C$. The paper outlines a brief attempt to assess the efficacy of non-chemical methods including optimal storage method (temperature and filler) of control of decay and moisture losses during storage of turmeric.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.9
• /
• pp.13-21
• /
• 2008

Partitioning tracer method is a useful tool to characterize large domains of the aquifers contaminated with light nonaqueous phase liquids (LNAPLs). Sorption of the partitioning tracers to the organic matter content of soil can potentially influence the efficacy of partitioning tracer method. LNAPL-water partitioning coefficients of tracers ($K_{nw}$), measured by static method, showed linear relationship. Sorption isotherm tests were conducted to evaluate the sorption capacity of the soils packed in the columns and the results were appropriately represented by Freundlich sorption isotherm. The sorption of tracers proportionally increased with the increase of the organic matter content of the soil. Laboratory experiments were conducted in four columns each packed with soils of different organic matter contents to determine the potential interference effects of sorption to soil organic matter content and correction factors for the errors in estimation of LNAPLs by partitioning tracer method. Though there were no contaminants added, breakthrough curves from columns packed with mixture of Jumunjin standard sand and organic matter showed separation of tracers. Columns were then contaminated to residual saturation with kerosene and breakthrough curves were obtained. The results show that sorption of tracers to soil organic matter leads to an increase in the retardation factor (R) and hence, to an overestimation of the saturation of LNAPLs. A relation between the percentage of organic matter content and the corresponding percentage error in the estimation of NAPLs has been developed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.6
• /
• pp.842-844
• /
• 2000

Changes in respiration rate (RR), rectal temperature (RT), respiratory moisture loss (RML), packed cell volume (PCV) and haemoglobin (Hb) were monitored in 2 adults female goats each of the Saanen (S) and Toggenburg (T) breeds during 60 min of exercise (walking at 3 km/h) on a moving-belt treadmill on each of 6 alternate days. A significant $time{\times}breed$ interaction was observed for RR; mean values in Sand T after 60 min of exercise were 130 and 223 /min ($p{\leq}0.01$). The observed time x breed interaction for RT indicated that S was less stressed by exercise than T; mean values after 60 min exercise were 40.4 and $40.8^{\circ}C$ respectively ($p{\leq}0.01$). For RML, the $day{\times}breed$ interaction ($p{\leq}0.001$) indicated that while S had higher values on day 1, thereafter the values for T were higher. The $time{\times}breed$ interaction for RML/breath indicated that values for T declined more rapidly (from 9.4 to 3.1 mgjbreath) than those for S (from 8.3 to 4.1 mgjbreath; ($p{\leq}0.01$). PCV declined during exercise ($p{\leq}0.05$) by 5.5 percentage points. The exercise imposed was stressful in that it led to increases in RR, RT and RML. S was most tolerant of exercise in that it recorded lower values of RT. The fact that the RML/breath was higher during exercies in S apparently allowed it to compensate for a lower RR. Despite higher RR and RML, T also had a higher RT, suggesting either higher muscular heat production during exercise in that breed, or higher sweating losses in S.

• Mycobiology
• /
• v.33 no.1
• /
• pp.51-60
• /
• 2005

Pot greenhouse experiments were carried out to attempt to increase the salinity tolerance of one of the most popular legume of the world; cowpea; by using dual inoculation of an Am fungus Glomus clarum and a nitrogen-fixer Azospirillum brasilense. The effect of these beneficial microbes, as single- or dual inoculation-treatments, was assessed in sterilized loamy sand soil at five NaCl levels ($0.0{\sim}7.\;2ds/m$) in irrigating water. The results of this study revealed that percentage of mycorrhizal infection, plant height, dry weight, nodule number, protein content, nitrogenase and phosphatase activities, as well as nutrient elements N, P, K, Ca, Mg were significantly decreased by increasing salinity level in non-mycorrhized plants in absence of NFB. Plants inoculated with NFB showed higher nodule numbers, protein content, nitrogen concentration and nitrogenase activities than those of non-inoculated at all salinity levels. Mycorrhized plants exhibited better improvement in all measurements than that of non-mycorrhized ones at all salinity levels, especially, in the presence of NFB. The concentration of $Na^+$ was significantly accumulated in cowpea plants by rising salinity except in shoots of mycorrhizal plants which had $K^+/Na^+$ ratios higher than other treatments. This study indicated that dual inoculation with Am fungi and N-fixer Azospirillum can support both needs for N and P, excess of NaCl and will be useful in terms of soil recovery in saline area.

• Korean Journal of Human Ecology
• /
• v.15 no.4
• /
• pp.527-539
• /
• 2006

The purpose of this study was to investigate the satisfaction and current conditions of playground environment in kindergartens and child care centers in Daejeon. Data were collected from 112 directors of kindergartens and child care centers through a structured questionnaire. Data were analyzed by using of frequency, percentage, mean, reliability analysis, crosstab, independent sample t-test, multiple regression. The major results showed the following. 1) 89.3% of subjects(100.0% of kindergartens and 79.7% of child care centers) have a playground. Most of playgrounds were located in the front yard. The playground's play equipments/areas were usually composed of slides, sand play areas, benches, empty playing fields, swings. Flowers/plants, shrubs were most of the natural factors of the playgrounds. 2) Slides and swimming pools of play equipments/areas were rated highest on the satisfaction level. Grass, flowers/plants, and shrubs as the natural factors of the playgrounds, were rated highest on the satisfaction level. 3) The playground was divided into 5 categories, which were made of manufactured play equipment settings, manipulative settings, rest settings, natural settings, adventure settings. Manufactured play equipment settings were rated highest on the satisfaction level. 4) Among 5 categories of the playground's play area, manufactured play equipment settings showed valid variables to playground's satisfaction level.

• Asian Journal of Turfgrass Science
• /
• v.6 no.1
• /
• pp.11-22
• /
• 1992

To determine the use of waste materials as root zone soil mixtures for turfgrass culture, the effects of paper mill sludge and briquet ash on physical and chemical properties of soil and growth of turfgrasses were examined. Three turfgrass species of zoysiagrass(Zoysia japonicaSteud.). kentycky bluegrass(Poa pratensis L. 'Ram I') and creeping bentgrass(Agrostis panistris Huds 'Persucross') were cultured in 32cm diameter plastic pots containing various soil mixtures. The basic ingredients used for mixtures included sand(SD), field soil(SL), paper mill sludge(PS), sphagnum peat moss(PM) and briquet ash(BA). Seven combinations using these ingreients were mixed in different percentage by volume as follows: SD+SL+PM(80:10.10), SH+SL+PS(80:10:10), SD-PM(80:20), SD+PS (80:20), SD+BA(80:20), SD+BA+PM(60:20:20) and SD+BA+PS(60:20:20). 1. Paper mill sludge showed pH of 6.6, more than 30% of organic matter content, and higher concentrations of total N, P, k, Ca, Mg and CEC. Bulk density, fild moisture capacity and electrical conductivity of soil mixtures were increased by the comimation of 10~20% PS by volume. 2. Briquet ash showed pH of 8.0, and higher levels of P, k, Ca and Mg than those of field soiks. Bulk density, field moisture capacity and hardenss of soil mixtures were increased but vertical water flow rate and electrical conductivity were decreased by the combination of 20% BA by volume. 3. Phytotoxic effects of PS and BA on growth of turfgrasses were not found. Shoot growth of all three species was higher in soil combination of SD+BA+PS than that of SD+SL+PM added with fertilizer. However, root growth was better in soil mixtures combined with PM. Soil mixtureomposed of 60% SD, 20% BA and 20% PS by volume was most effective on growth of all three species. 4. Paper mill sludge resulted in higher N level in the leaf tissue. The contents of heavy metals such as Cd and Ph did not vary significantly among soil mixtures and species. However, the Mn level was 2~3 times higher in plants growh in mixtures containing PM compared with others, and especially it was higher in creeping bentgrass than other species.

• Journal of Korea Foundry Society
• /
• v.3 no.1
• /
• pp.13-21
• /
• 1983

In order to determine the feeding distance of aluminiun alloys (Alsi7Mg and AlCu4Ti) bar castings in the sand mold, the distance of the sound castings has been observed by radiograph for various risers, melt treatment, and casting design. Variation of porosity and hardness with the distance from the riser were also measured in order to determine the casting soundness. The results obained were as follows; 1) The modulus of riser should be 1.4 times of the casting`s 2) The maximum distance which can be made sound is greatly dependent on chemical composition and ingate location, and follows the rules given by the formula; a) When the melt flows into the casting first, and the riser afterward, D = 37.7 ${\sqrt{T}}$ for AlSi7Mg D = 31.2 ${\sqrt{T}}$ for pure aluminium D ${\ge}$ 54.8 ${\sqrt{T}}$ for AlCu4Ti Where T = casting thickness in mm Of this maximum distance, $aa{\sqrt{T}}$ for AlSi7Mg and 7.5 ${\sqrt{T}}$ for pure aluminium is made sound by the chilling effect of the casting edge. b) When the melt flows into the casting passing through the riser, $30{\times}30{\times}600mm$ bars can be made sound in all cases 3) Percentage of porosity is higer in AlCu4Ti than AlSi7Mg. And it is increased gradually by moving closer to the riser in case of $30{\times}30{\times}600mm$ bars, but for the $30{\times}30{\times}600mm$ bars it is increased gradually by moving closer to the center of bars. 4) Hardness variation is similar to the tendency of porosity. And it decreased gradually with approaching to the center in case of $30{\times}30{\times}600mm$ bars.

• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.25-33
• /
• 2004

The waste concrete produced by the process of the highway construction and management, has been crushed in-situ, and the waste aggregate has been experimentally used for anti-freezing layer and lean concrete. After testing the bearing capacity on anti-freezing layer, it was found that when the waste aggregates mixed with natural sand would be within the required gradations, the layer meets the requirements of limitation and the percentage to passing 2$\sim$20mm sieve increased by 5$\sim$13% because the flimsy mortars on aggregate were re-crushed by vibrated-roller compactor. The compressive strength of lean concrete using recycled aggregate was 71$\sim$85% of the natural coarce aggregate made, but nevertheless the recycled aggregates are applicable to the lean concrete because they largely exceeded the required strength, $57.5kgf/cm^2$.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.723-730
• /
• 2007

This study was conducted to develop a combined method for remediating a Chlorinated Aliphatic Hydrocarbons (CAHs) mixtures-contaminated aquifer. The process is consist of two processes. A chemical process (1st) using natural zinc ores for reducing higher concentrations of CAH mixtures to the level at which biological process is feasible; and A biological process (2nd) using aerobic cometabolism for treating lower concentration of CAH mixtures (less than 1 mg/L). Natural zinc ore showed relatively high transformation capacity, average dehalogenation percentage, and the best economic efficiency in previously our study. To evaluate the feasibility of the process, we operated two columns in series (that is, chemical and biological columns). In the first column filled with natural zinc ore and sand, CAH mixtures were effectively transformed with more than 95% efficiency, the efficiency depends on the Empty Bed Contact Time (EBCT) and the mass of zinc ore packed. Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD) analysis were performed to make sure whether natural zinc ore played an key role in the dechlorination of the CAH mixtures. The characteristics of zinc metal surface changed after exposure to CAHs due to oxidation of $Zn^0$ to $Zn^{2+}$. In the biological column injecting propane, DO and effluent of the chemical column, only 1,1,1-TCA was cometabolically transformed. Consequently, the combined process would be effective to remediate an aquifer contaminated with high concentrations of CAH mixtures.