• The Korean Journal of Ecology
• /
• v.26 no.3
• /
• pp.123-127
• /
• 2003

Cubic-meter volumes estimated from two proxy taper functions were compared to observed volumes of Japanese red cedar trees (Cryptomeria japonica D. Don) to evaluate accuracy and precision in the centroid method. Centroid volume estimates were also compared to volume estimates from existing whole-tree volume equations developed for another geographic region. This study found that one proxy function produced unbiased volume estimates while the other was biased. Volume estimates from the whole-tree equations were also biased. However, the volume estimates from the whole-tree equations were more precise than those from the centroid method. These results support previous studies that the centroid method can produce reliable volumes of trees when no other reliable volume equations exist.

• Journal of agriculture & life science
• /
• v.43 no.1
• /
• pp.17-23
• /
• 2009

This study was conducted to compare volumes estimated from two taper functions and observed volumes of Chamaecyparis obtusa trees to evaluate accuracy and precision of centroid method. Centroid volume estimates were also compared with volume estimates from existing Forest Resources Evaluation and Prediction Program. The results of this study showed that Gregoire's simple taper function produced unbiased volume estimates while the others were biased. Volume estimates from the Forest Resources Evaluation and Prediction Program were also biased when applied in the Jangseong National Forest regions. These results suggested that the centroid method could produce reliable stem volumes of trees when no other reliable stem volume equations exist.

• Environmental Analysis Health and Toxicology
• /
• v.17 no.2
• /
• pp.95-107
• /
• 2002

This study was designed to investigate the characteristics of atmospheric concentrations of toxic volatile organic compounds (VOCs) in Korea. Target compounds included 1,3-butadiene, aromatics such as BTEX, and a number of carbonyl compounds. In this paper, as the first part of the study, the performance of sampling and analytical methods was evaluated for the measurement of selected VOCs and carbonyl compounds in the ambient air. VOCs were determined by the adsorbent tube sampling and automatic thermal desorption coupled with GC/MSD analysis, while carbonyls by the DNPH-silica cartridge sampling with HPLC analysis. The methodology was investigated with a wide range of performance criteria such as repeatability, linearity. lower detection limits, collection efficiency, thermal conditioning, breakthrough volume and calibration methods using internal standards. In addition, the sampling and analytical methods established in this study were applied to real field samples duplicately collected in various ambient environments. Precisions for the duplicate samples appeared to be comparable with the performance criteria recommended by USEPA TO-17. The overall precision of the sampling and analytical methods was estimated to be within 20 ∼ 30% for major aromatic VOCs such as BTEX, whereas the precision for major carbonyl compounds such as formaldehyde and acetaldehyde was within 10 ∼ 20% for field samples. This study demonstrated that the adsorbent sampling and thermal desorption method can be reliably applied for the measurement of BTEX in ppb levels frequently occurred in common indoor and ambient environments.

• Journal of Environmental Health Sciences
• /
• v.42 no.2
• /
• pp.102-111
• /
• 2016

Objectives: This study was conducted to evaluate the use of polyurethane foam disk passive air samplers (PUF PAS) for better measurement of atmospheric polychlorinared dibenzo-p-dioxins/furans (PCDD/Fs) concentrations compared to PUF PAS combined with high volume air samplers (HVS). Methods: Air samples were collected by a low volume air sampler (LVS) and PUF PAS. A total of two pairs were continuously collected for six months, but the PUF was replaced every two months. Results: A good correlation was shown ($R^2=0.8595$, p<0.0001) between atmospheric PCDD/Fs concentration measured by the LVS and PUF PAS. The average air sampling rate ($1.5m^3/day-sampler$) of all PCDD/Fs congeners showed a middle of the means which were measured using a HVS by other researchers in different cities. In addition, the air sampling rates of the LVS for each congener made less difference than did those of the HVS. Conclusion: It was found that measurements using the LVS were less influenced by atmospheric peak PCDD/Fs concentrations. However, trace POPs such as PCDD/Fs may involve relatively large analytical errors in measurement, and as a result the air sampling rate of the respective PCDD/Fs isomer is also likely to involve errors. The method of using a regression straight line between the concentrations obtained from the LVS and those from the PUF PAS was judged higher than the method using the air sampling rate, since the former compensated for the experimental errors in the process of evaluation of atmospheric PCDD/F concentrations using the PUF PAS.

• Journal of Environmental Health Sciences
• /
• v.38 no.4
• /
• pp.360-368
• /
• 2012

Objective: This study was carried out to use pine needles as a passive air sampler (PAS) of atmospheric Polychlorinated Biphenyls (PCBs). Methods: PCB concentrations in ambient air ($C_a$, ng/$m^3$) and deposited on pine needles ($C_p$, ng/g dry) were analyzed simultaneously from June 1 to December 31. Air samples were taken using a low volume PUF active air sampler and the overall average air volume was about 900-1,000 $m^3$. Pine needles were collected at the end of August and December near the air sampler. Results: $C_a$ were higher at higher air temperature and lower chlorinated PCB congeners, but $C_p$ showed irregular distribution. The average PCB sampling rates from air to pine needles were 0.116 (0.002-0.389) $m^3$/day - g dry. Conclusions: A poor correlation was shown between $C_a$ and $C_p$. However, a good correlation was shown between the logarithm of octanol-air partitioning coefficient ($logK_{oa}$) and log ($C_p/C_a$), and the interrelation was better with longer sampling time (June to December) than shorter sampling time (June to August). The average PCB sampling rates from air to pine needles were the lowest with respect to PUF disk, XAD-2 resin and semipermeable membrane devices (SPMDs) PAS. The average ratio ($C_{a-calc}/C_{a-meas}$) of calculated ($C_{a-calc}$) and measured ($C_{a-meas}$) PCB concentration was 0.69 with a shorter sampling time and 1.24 with a longer, so $C_{a-calc}$ was close to $C_{a-meas}$. It was found that pine needles can be used as PAS of atmospheric PCBs, and are especially suitable for long-time PAS.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.6
• /
• pp.730-740
• /
• 2018

Hydrofoil is the direct component to generate thrust for underwater glider. It is significant to improve propulsion efficiency of hydrofoil. This study optimizes the shape of a hydrofoil using Free-Form Deformation (FFD) parametric approach and Surrogate-based Optimization (SBO) algorithm. FFD approach performs a volume outside the hydrofoil and the position changes of control points in the volume parameterize hydrofoil's geometric shape. SBO with adaptive parallel sampling method is regarded as a promising approach for CFD-based optimization. Combination of existing sampling methods is being widely used recently. This paper chooses several well-known methods for combination. Investigations are implemented to figure out how many and which methods should be included and the best combination strategy is provided. As the hydrofoil can be stretched from airfoil, the optimizations are carried out on a 2D airfoil and a 3D hydrofoil, respectively. The lift-drag ratios are compared among optimized and original hydrofoils. Results show that both lift-drag-ratios of optimized hydrofoils improve more than 90%. Besides, this paper preliminarily explores the optimization of hydrofoil with root-tip-ratio. Results show that optimizing 3D hydrofoil directly achieves slightly better results than 2D airfoil.

• Journal of Korea Multimedia Society
• /
• v.14 no.10
• /
• pp.1229-1237
• /
• 2011

The volume ray-casting method is one of the direct volume rendering methods that produces high-quality images as well as manipulates semi-transparent object. Although the volume ray-casting method produces high-quality image by sampling in the region of interest, its rendering speed is slow since the color acquisition process is complicated for repetitive memory reference and accumulation of sample values. Recently, the GPU-based acceleration techniques are introduced. However, they require pre-processing or additional memory. In this paper, we propose efficient point-primitive based method to overcome complicated computation of GPU ray-casting. It presents semi-transparent objects, however it does not require preprocessing and additional memory. Our method is fast since it generates point-primitives from volume dataset during sampling process and it projects the primitives onto the image plane. Also, our method can easily cope with OTF change because we can add or delete point-primitive in real-time.

• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.279-288
• /
• 1995

Ultrasonic Doppler systems for the purpose of estimating blood flow velocity, blood flow volume, and flow imaging are commonly used due to advantages of non-invasive and real time observation. Specially, the technical developments of color flow mapping (2-D Doppler) systems have made a relatively rapid progress. However, the 2-D Doppler systems have several problems, such as the range ambiguity, low signal to noise ratio, and slow frame rate. The slow frame rate problem is resolved by using the spatial average which is a method to acquire more data samples for mean frequency estimation. In this paper, spatial average method using the 2nd order sampling instead of quadrature sampling is proposed. The experimental results show that the proposed methods have good performance and easy application to the color flow mapping system.

• Journal of Korean Society of Forest Science
• /
• v.95 no.5
• /
• pp.595-600
• /
• 2006

The plot design influences the budgets and the precision of forest inventory results. The objective of this study is to determine the efficiency of estimating forest variables such as tree density, basal area, volume, and species richness based on various plot sizes using fixed-area plot sampling in the natural deciduous forest of Pyeong-Chang County, Gang-won Province, Korea. In this study, 108 reference plots were established with a fixed plot size and shape of 0.09 ha ($30m{\times}30m$). In order to determine the optimal plot size for the interest of variables, each sample plot was established using different shapes (square, circle, and rectangle) and was divided into different plot sizes from 100 to $900m^2$. The mean relative difference (MRD) for the sum of the basal area and volume, and tree density per hectare decreased as plot size increased. But the MRD for three variables were only below 13% at the plot size of $500m^2$. Species richness for each reference stand observed ranging from 2 to 15 species, demonstrated highly positive significant relationships with plot size. The minimum plot size for the estimation of tree density, the sum of the BA and volume was determined to be about $400m^2$, whereas the estimation of species richness required a minimum plot size of $500m^2$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.29-37
• /
• 2008

In this parer, we purpose for applying the RFID(Radio Frequency IDentification) system in National Road Traffic Volume Survey. Because there is limitation for shipping RFID Tag on every car, we firstly defined Expansion (process of making the number of all cars which passed survey point from sampling data) and determined the best methodology among 3 methodologies (Time factor Model, Fuzzy Model, Artificial Neural Network). As a result of analysis, Time Factor Model was chosen as the best methodology for Expansion. Also, we analyzed to find an application of the RFID system in National Road Traffic Volume Survey and obtained a possibility applying it. It is expected that if the RFID system is used in Traffic Volume Survey, the survey cost is saved than before.