• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.5
• /
• pp.631-636
• /
• 2009

This study has its intention to investigate the water quality of non-point source which is runoff from roads. We have classified and selected twelve sites as city road, industrial road, national road and mountain road by considering their traffic volume and surroundings. Water quality was analyzed based on BOD, COD, SS, T-N and T-P and the concentrations were measured by sampling after rainfall with the interval of 10 minutes, 20 minutes, and 30 minutes. BOD was the highest in city road with 57.6 mg/L and the lowest in mountain road with 45.0 mg/L. For COD, the highest concentration in industrial road was 146.5 mg/L and the lowest was in mountain road with 98.0 mg/L. The run off concentration of SS was up to maximum 630.0 mg/L (average 280.4 mg/L) which was remarkable compared to other types of road. It showed its lowest concentration in national road with 76.0 mg/L. T-N and T-P were the highest in industrial road and the lowest in mountain road. We found out that the runoff concentration was high with large amount of traffic volume and it seemed to be high in city road and industrial road where they were largely affected by their surroundings. Relatively, national road and mountain road seemed to show low concentration as they have less traffic volume and less affected by their surroundings.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.6
• /
• pp.670-678
• /
• 2010

An ecological investigation was conducted in winter from November 2007 to February 2008, around Wangdol Reef in the East Sea to analyze the population structure and fecundity of Chinoecetes opilio. The sex ratio was 30.11:69.89% (female:male) in November, 62.03:37.97% in December, 37.59:62.41% in January and 14.69:85.31% in February. Regression equations indicated highly positive relationships between size and weight parameters (carapace length, width, total weight). During the sampling period ovigerous females were continuously collected. The percentage of ovigerous females was 96% in November, 90.57% in December 89.80% in January, and 88.46% in February. The average number of embryos was 64,800. The regression equation between carapace width and the number of embryos was y = 2.6805x - 0.9182 ($R^2$ = 0.7166). Embryo volume increased as embryo development proceeded. The mean size of an embryo was 0.72 mm. Embryo volume ranged from 0.42 to $0.84\;m^3$ during embryo developmental stages 1 to 3.

• Coupled systems mechanics
• /
• v.12 no.6
• /
• pp.503-517
• /
• 2023

Standard Digital Volume Correlation (DVC) approaches are based on pattern matching between two reconstructed volumes acquired at different stages. Such frameworks are limited by the number of scans (due to acquisition duration), and time-dependent phenomena can generally not be captured. Projection-based Digital Volume Correlation (P-DVC) measures displacement fields from series of 2D radiographs acquired at different angles and loadings, thus resulting in richer temporal sampling (compared to standard DVC). The sought displacement field is decomposed over a basis of separated variables, namely, temporal and spatial modes. This study utilizes an alternative route in which spatial modes are con-structed via scan-wise DVC, and thus only the temporal amplitudes are sought via P-DVC. This meth-od is applied to a glass fiber mat reinforced polymer specimen containing a machined notch, subjected to in-situ cyclic tension, and imaged via X-Ray Computed Tomography. Different temporal interpolations are exploited. It is shown that utilizing only one DVC displacement field (as spatial mode) was sufficient to properly capture the complex kinematics up to specimen failure.

• Journal of Korean Society of Forest Science
• /
• v.61 no.1
• /
• pp.37-44
• /
• 1983

This study was to estimate total annual volume growth by the measurement of mean tree growth during the last 10 years. Surveyed Forest stand was the second block (20.80 ha.)of Kyung Hee University Forests located at San 58 and 64, Gaegok-Ri, Gapyung-Yeup, Gapyung-Goon, Kyunggi province in Korea. The stand was mainly composed of uneven-aged Pinus densiflora and the estimation of tree volume was conducted by taking the cores at the D.B.H. of the sample tree which was selected by sub-sampling. The results obtained were as follows; 1) The regression between the diameter (D) and diameter growth ($\hat{I}$) was $\hat{I}=0.5499+0.0101D$. 2) The estimated equation of confidence interval for the diameter growth was $S^2{\hat{I}}=0.00817(0.09538-0.00952D+0.00027D^2$) 3) The equation for estimating tree height (H) from diameter was $H=1.32376D^{0.77958}$ 4) The equation for estimating tree volume from diameter and height $V=0.0000622D^{1.6918}H^{1.1397}$ 5) Total annual tree volume growth was $5.4041m^3/ha$, and ranged from 5.6131 to $5.1984m^3/ha$. 6) Annual growth rate of total tree volume and its error were 8.8% and 3.9%, respectively. The annual volume growth per tree for any districts can be estimated by this method, and the annual volume growth will be successfully predicted. Because of poor forest growing stock in Korea, annual amount of allowable cut should not exceed annual tree volume growth for better forest management. Accordingly, annual amount of allowable cut should be either equal to or less than annual tree volume growth for the balanced establishment between timber supply and demand in Korea. Demand shortage will be substituted with imported timber. Such plans enable Korean Government to develop a better policy of forest resources management.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.483-488
• /
• 2015

This paper implements a long-term monitoring system (LMS) for ship's engine performance analysis (SEPA) based on the web, for the purpose of the communication speed and engine maintenance. This system is composed of a simulator, monitoring module with a multi channel A/D converter, monitoring computer, network attached storage (NAS), RS485 serial and wireless internet communication system. The existing products monitor the information transmitted from pressure sensors installed in the upper parts of each of engines in the local or web computer, but have a delay in the communication speed and errors in long-term monitoring due to the large volume of sampling pressure data. To improve these problems, the monitoring computer saves the sampling pressure data received from the pressure sensors in NAS, monitors the long-term sampling data generated by the sectional down sampling method on a local computer, and transmits them to the web for long-term monitoring. Because this method has one tenth of the original sampling data, it will use memory with small capacity, save communication cost, monitor the long-term sampling data for 30 days, and as a result, make a great contribution to engine maintenance.

• Journal of Environmental Health Sciences
• /
• v.39 no.1
• /
• pp.56-70
• /
• 2013

Objectives: This paper aims to investigate the seasonal deposition characteristics of water-soluble ion species by comparing the deposition amount of two samples taken according to different sampling methods of deposition for ambient aerosol such as gases and particulate matters. Methods: Deposition samples were collected using two deposition gauges in the downtown area of Iksan City over approximately two weeks of each season in 2004. The type of deposition gauges consisted of two different sampling methods known as dry gauge and a wet gauge. The dry gauge was empty and used a dry PE bottle with an inlet diameter of 9.6 cm. Before the beginning of each deposition sampling, a volume of 30-50 ml distilled ionized water was added to the wet gauge to wet the bottom during the sampling period. Deposition samples were measured twice per day and analyzed for inorganic water-soluble ion species using ion chromatography. Results: The daily deposition amounts of all measured ions in the dry gauge and the wet gauge showed a significant increase when precipitation occurred, having no difference of deposition amount between in the wet gauge and in the dry gauge. By excluding two samples from rainy days during the sampling period, the mean daily deposition of all ions in dry gauge and wet gauge were $6.58mg/m^2/day$ and $18.16mg/m^2/day$, respectively. The mean deposition amounts of each ion species were higher in the wet gauge than in the dry gauge because of the surface difference of the sampling gauge, especially for $NH_4{^+}$ and ${SO_4}^{2-}$. The mean deposition amounts of $NH_4{^+}$ and ${SO_4}^{2-}$ in the wet gauge were found to be about 15.4 times and 5.2 times higher than that in dry gauge, with a pronounced difference between spring and summer, while the remaining ion species were 1.1-2.0 times higher in the wet gauge than in the dry gauge. Dominant species in the dry gauge were $Ca^{2+}$ and $NO_3{^-}$, accounting for 36.4% and 18.1% of the total ion deposition, whereas those in the wet gauge were $NH_4{^+}$ and ${SO_4}^{2-}$, accounting for 32.5% and 25.0% of the total ion deposition, respectively. Conclusion: The seasonal differences in deposition amounts of water-soluble ion species in ambient aerosol depending on the two types of different sampling methods were identified. This suggests that the removal of ambient aerosol is strongly influenced by the weather conditions of each season as well as the condition of earth's surface, such as dry ground and water.

• Analytical Science and Technology
• /
• v.37 no.3
• /
• pp.174-188
• /
• 2024

This review summarized research trends regarding sample collection methods, pretreatment method, and types of analysis devices for microplastics (MPs) in soil and groundwater matrices. Soil sampling considers the selection of sampling location, depth, and volume. The typically sampling depth is within 15 cm (topsoil), and about 1 kg of mixed each sample. Among spot sampling and continuous flow sampling, groundwater sampling mainly used a continuous flow sampling, with collection rates 2 to 6 L/min in the range of 300~1,000 L, and followed by immediate on-situ filtration. Pretreatment method, applied to soil and groundwater, consist of organic digestion and density separation. In the organic digestion method, H₂O₂ is recommended among H₂O₂, acidic, alkaline, and enzymatic method. NaCl is primarily used as a reagent in density separation. However, depending on the density of MPs, other regents can be selectively used like ZnCl₂, ZnBr₂, and etc. Representative analysis device includes Fourier Transform Infrared (FTIR) and Raman spectroscopy for non-destructive analysis and Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS) for destructive analysis. µ-FTIR and Raman can count MPs of larger than 10 and 1 ㎛, and analyze MPs materials. However, it is need to sufficiently remove interference, like organic matter, in spectroscopic analysis using essential pretreatment method. Py-GC/MS is being continuously researched because it doesn't require complex pretreatment method and allows quantitative analysis of specific materials.

• Journal of Forest and Environmental Science
• /
• v.32 no.2
• /
• pp.140-148
• /
• 2016

This study aims to estimate the forest volumes of the economic forest in Gangwon Province of Republic of Korea (hereinafter referred to as Gangwon) through the synthetic estimation. To estimate the forest volume, Stratified systematic sampling method was used along with the forest type maps and the $5^{th}$ National Forest Inventory data. The synthetic estimation includes sample plots of the expanded areas as well as those of the target area, and the forest volume of economic forest in every city and county throughout Gangwon. Results show that the average forest volume calculated by synthetic estimation was $159.6m^3/ha$ in national economic forest and $129.6m^3/ha$ in private economic forest. The total forest volume of the national economic forest was approximately $59.45million\;m^3$, which was $20.18million\;m^3$ higher than that of the private economic forest. On the other hands, the standard error of the national economic forest was approximately ${\pm}2.21m^3/ha$, which was ${\pm}0.30m^3/ha$ lower than that of the private economic forest. The lowest standard errors was about ${\pm}3.12 m^3/ha$ in broad-leaved forest, followed by ${\pm}4.33m^3/ha$ of mixed forest, and ${\pm}5.78m^3/ha$ of coniferous forest.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.4
• /
• pp.33-40
• /
• 2020

It is now common to find the wastes buried in the past during the excavation process of soil for large scale housing and land development. Without proper treatment of the wastes environmentally, the excavation process is no longer able to proceed, and an action plan should be provided to treat the wastes with environmental and economic viability. In the study, the relationship between the apparent density of the wastes and the volume conversion factor, which is the basis in the estimation of waste treatment cost was investigated. From 10 sampling points of a landfill site, wastes were sampled, analyzed for physical characteristics, and the apparent density of mixed and sorted waste was assessed. Applying the empirical formula, and the formula we suggested here, the volume conversion factors were compared with that measured directly in the field using dump truck and excavator. Obviously there was a close relationship among the volume conversion factors resulting from the empirical formula, the formula we suggested and that measured in the field.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.126-126
• /
• 2003

Performance of a laboratory scale closed seawater recirculating aquaculture system was evaluated. Twenty-kg Korean rockfish (130 fish) with an average body weight of 153.8 g was stocked. Over 107-day culture period, fish reached final density of 51.7 kg/m$^3$ (initial density, 33.3 kg/m$^3$) on the culture tank volume basis. On a daily basis, water addition was 3.4% of the total water volume in the system. Total ammonia nitrogen (TAN)concentrations were below 1 mg/L and nitrite nitrogen (NO$_2$-N) concentrations were within the range of 1-3 mg/L on most sampling days. TAN was removedin bead and sand filters and it was removed or produced in the sedimentation basin. Basically, NO$_2$-N was removed in the bead and sand filters while it was either removed or produced in the sedimentation basin. Nitrate nitrogen (NO$_3$-N) was produced in the bead filters and removed in the sand filter and sedimentation basin. Foam fractionator performed well in the recirculating system. The maximal daily removal values for total suspended solids (TSS) and protein were 10,9 g and 1.4 g, respectively. Whole water quality parameters were within the levels commonly recommendedfor fish culture on most of the sampling days. However, further studies are needed to evaluate the commercial feasibility of this system because of the small-scale system used in present experiment. At least, present study still provides some basic information for further studies of this kind of system.