• Nuclear Engineering and Technology
• /
• v.46 no.3
• /
• pp.291-298
• /
• 2014

This paper concerns estimating uncertainties of the core neutronics design parameters of power reactors by direct sampling method (DSM) calculations based on the two-step McCARD/MASTER design system in which McCARD is used to generate the fuel assembly (FA) homogenized few group constants (FGCs) while MASTER is used to conduct the core neutronics design computation. It presents an extended application of the uncertainty propagation analysis method originally designed for uncertainty quantification of the FA FGCs as a way to produce the covariances between the FGCs of any pair of FAs comprising the core, or the covariance matrix of the FA FGCs required for random sampling of the FA FGCs input sets into direct sampling core calculations by MASTER. For illustrative purposes, the uncertainties of core design parameters such as the effective multiplication factor ($k_{eff}$), normalized FA power densities, power peaking factors, etc. for the beginning of life (BOL) core of Yonggwang nuclear unit 4 (YGN4) at the hot zero power and all rods out are estimated by the McCARD/MASTER-based DSM computations. The results are compared with those from the uncertainty propagation analysis method based on the McCARD-predicted sensitivity coefficients of nuclear design parameters and the cross section covariance data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.687-695
• /
• 2005

A bandpass sampling technique, which is a method directly downconverting a bandpass signal to a baseband or a low IF signal without analog mixers, can be an alterative choice for the SDR system to minimize the RF front-end. In this paper, a complex bandpass sampling technique for two bandpass-filtered signals is proposed. We derived generalized formulae for the available sampling range, the signal's IF and the minimum sampling frequency taking into consideration the guard-bands for the multiple RE signals. Thru the simulation experiments, the advantages of the . complex bandpass sampling over the pre-reported real bandpass sampling are investigated for applications in the SDR design.

• Journal of Korean Society for Quality Management
• /
• v.9 no.1
• /
• pp.40-45
• /
• 1981

This paper deals with an economical sampling plan, recently being concentrated on and, namely, investigates how to determine the basic concepts to settle the sampling plan of a minimum cost. On an inspection of sampling, a Linear Cost Model of a cost function which is concerned with the representative cost dements, is established and by the investigation of its possible solution economical single sampling plan for recitying inspection by attribute is suggested.

• The Korean Journal of Applied Statistics
• /
• v.28 no.6
• /
• pp.1217-1225
• /
• 2015

Survey research, data is commonly collected through a sample design with complex design features that allow the relative efficiency on the precision of an estimator to be measured using the concept of the design effect compared to simple random sampling as a reference design. This concept is most useful when the design effect can be expressed as a function of various design features. We propose a design effect formula suitable under a stratified multistage sampling by generalizing Gabler et al. (1999, 2006)'s approaches for multistage sampling. Its use can either guide improvement in the design efficiency when in design stage or enable the evaluation of the adopted design features afterwards.

• Communications for Statistical Applications and Methods
• /
• v.8 no.1
• /
• pp.73-85
• /
• 2001

The spatial population existing in a plane ares, such as an animal or aerial population, have certain relationships among regions which are located within a fixed distance from one selected region. We consider with the adaptive searching estimation in spatial sampling for a spatial population. The adaptive searching estimation depends on values of sample points during the survey and on the nature of the surfaces under investigation. In this paper we study the estimation by the adaptive searching in a spatial sampling for the purpose of estimating the area possessing a particular characteristic in a spatial population. From the viewpoint of adaptive searching, we empirically compare systematic sampling with stratified sampling in spatial sampling through the simulation data.

• Journal of the Korean Statistical Society
• /
• v.26 no.2
• /
• pp.181-198
• /
• 1997

The variable sampling rates scheme is proposed by taking random sample size and sampling interval during the process. The performance of the scheme is measured in terms of the average time to signal adjusted by teh sampling cost when the process is out of control. This measurement evaluates the effectiveness of the scheme in terms of the cost incurred due to nonconformation as well as sampling. The variable sampling rates scheme is shown to be effective especially for small and moderate shifts of the mean when compared to the standard scheme.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.3
• /
• pp.240-253
• /
• 2017

Latin hypercube sampling is widely used design-of-experiment technique to select design points for simulation which are then used to construct a surrogate model. The exploration/exploitation properties of surrogate models depend on the size and distribution of design points in the chosen design space. The present study aimed at evaluating the performance characteristics of various surrogate models depending on the Latin hypercube sampling (LHS) procedure (sample size and spatial distribution) for a diverse set of optimization problems. The analysis was carried out for two types of problems: (1) thermal-fluid design problems (optimizations of convergent-divergent micromixer coupled with pulsatile flow and boot-shaped ribs), and (2) analytical test functions (six-hump camel back, Branin-Hoo, Hartman 3, and Hartman 6 functions). The three surrogate models, namely, response surface approximation, Kriging, and radial basis neural networks were tested. The important findings are illustrated using Box-plots. The surrogate models were analyzed in terms of global exploration (accuracy over the domain space) and local exploitation (ease of finding the global optimum point). Radial basis neural networks showed the best overall performance in global exploration characteristics as well as tendency to find the approximate optimal solution for the majority of tested problems. To build a surrogate model, it is recommended to use an initial sample size equal to 15 times the number of design variables. The study will provide useful guidelines on the effect of initial sample size and distribution on surrogate construction and subsequent optimization using LHS sampling plan.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.4
• /
• pp.701-712
• /
• 2013

The e-learning industry status survey statistic provides information about the actual conditions of supply and demand of the e-learning industries. NIPA (National IT Industry Promotion Agency) has published the annual report of the survey results since 2004. Due to the 9th version of the KSIC (Korean standard industrial classification) revised in 2008, a refinement of the sampling design for the survey becomes necessary, especially that for the business demand sector. This article, based on the 9th revision of the KSIC, constructs a stratification of the target population used for the e-learning industry status survey on the business demand sector. Classification of strata in the business population is based on the industrial type and employment scale of business. Under the stratified population, we design a sampling scheme by using the power allocation method that enables us to satisfy a target coefficient of variation of each industrial stratum. In order to secure an accurate survey results based on the proposed sampling design, we consider the problem of calculating the design weights, derivation of parameter estimators, and formulas of their standard errors.

• The Korean Journal of Applied Statistics
• /
• v.24 no.2
• /
• pp.393-400
• /
• 2011

In a large scale survey, cluster sampling design in which a set of observation units called clusters are selected is often used to satisfy practical restrictions on time and cost. Especially, a two stage cluster sampling design is preferred when a strong intra-class correlation exists among observation units. The sample Primary Sampling Unit(PSU) and Secondary Sampling Unit(SSU) size for a two stage cluster sample is determined by the survey cost and precision of the estimator calculated. For this study, we derive the optimal sample PSU and SSU size when the population SSU size across the PSU are di erent by extending the result obtained under the assumption that all PSU have the same number of SSU. The results on the sample size are then applied to the $4^{th}$ Korea Hospital Discharge results and is compared to the conventional method. We also propose the optimal sample SSU (discharged patients) size for the $7^{th}$ Korea Hospital Discharge Survey.

• Communications for Statistical Applications and Methods
• /
• v.6 no.1
• /
• pp.107-116
• /
• 1999

We propose a sample design which minimize Bayes risk for cluster smpling in sampling inspection. We treat a pilot sample and an additional sample size as random variable. In addition we compute an appropriate cluster size for handling over-dispersion.