• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1619-1619
• /
• 2001

Ourwork aims to assess the content of dry matter, protein, cell wall parameters and water soluble carbohydrates in forages without having to handle samples, transport them to a laboratory, dry, grind and chemically analyze them. for this purpose, the concept of fresh forage analysis under field conditions by means of compact integrated NIRS InGaAs-diode array instruments on small plot harvesters is being evaluated for plant breeding trials. This work was performed with the world first commercial experimental forage plot harvester equipped with a NIRS module for the collection, compression, and scanning of forage samples (including automatic referencing and dark current measure ments). It was used for harvesting and analyzing a number of typical forage grass and forage legume plot trials. After NIRS measurements in the field each sample was again analyzed in the laboratory by means of a conventional grating spectrometer equipped with Si-and PbS-detectors. Conventional laboratory analysis of the samples was restricted to dry matter (DM) content by means of oven drying at 105. Routine chemometric procedures were then employed to assess the comparative accuracy and precision of the DM assessments in the spectral range between 950 and 1650nm by the NIRS diode array as well as by the conventional NIRS scanning instrument. The results of this study confirmed that the type of NIRS diode array instrument employed here functioned well even in rugged field operations. further refinements proved to be necessary for optimizing the automatic filling of the sample compartment to adjust for the wide variation in forage material under conditions of extremely low or high harvest yields. The error achieved in calibrating the apparatus for forages of typical DM content proved to be satisfactory (SECV < 1.0). Possibly as a consequence of higher sampling errors, its performance in atypical forages with elevated DM contents was less satisfactory. The error level obtained on the conventional grating NIR spectrometer was similar to that of the diode array instrument for both types of forage.

• Journal of Pharmaceutical Investigation
• /
• 제33권3호
• /
• pp.245-253
• /
• 2003

Dissolution profile comparsions can be done by virtue of the similarity factor $(f_2)$. It is a logarithmic reciprocal square root transformation of the sum of squared error of % dissolution differences between two profiles at several time points. It gives information on the degree of similarity between the two profiles: An $f_2$ value between 50 and 100 suggests the similarity/equivalence of the two dissolution curves being compared. The objective of this report was to provide a careful examination on the $f_2$ metrics in detail. It was shown that $f_2$ values exceeded 50, when relative differences in % dissolved between two products were less than 15% at all time points. The similarity factor value was also found to be greater than 50, in cases when absolute % dissolution differences were below 10% at all time points. Interestingly, the $f_2$ value was changed by the number of the time points selected for calculation. In particular, $f_2$ tended to have higher values, when the $f_2$ metrics used a large number of time points in which % dissolved reached plateau. Finally, since the similarity factor was a sample statistics, it was impossible to infer type I/II errors and sampling error. Despite certain limitations inherited in the $f_2$ metrics, it was easy and convenient to evaluate how similar the two dissolution profiles were.

• 한국도서관정보학회지
• /
• 제45권3호
• /
• pp.93-117
• /
• 2014

본 연구는 통합서지용 KORMARC으로의 효과적인 DB 변환과 시스템 구축에 대하여 서강대학교 도서관의 사례를 중심으로 모색하는 데 목적이 있다. 통합서지용 KORMARC 표준이 제정된 이래 많은 도서관에서 새로운 표준에 맞추어 서지 DB를 변환하고 있다. 서강대학교 로욜라도서관은 KERIS 변환기와 같은 공공 기관의 변환기를 통하여 변환하지 않고 시스템 벤더를 별도 선정, 자체 변환을 시도하였다. 자체 변환은 자관 서지 DB의 오류 수정이나 데이터 보완기능을 변환기에 상당부분 수용할 수 있으므로 수작업 데이터 보정의 인력적 여력이 없는 기관에 유리하다. 아울러 전체 DB를 여러 번 변환하지 않고 샘플링 변환을 반복함으로써 변환의 안전성과 시간적 단축을 도모할 수 있다.

• 한국대기환경학회지
• /
• 제17권5호
• /
• pp.375-384
• /
• 2001

Optical remote sensing techniques are particularly advantageous over the conventional fixed point methods because with these methods large-area monitoring can be possible and sample preparation difficulties are avoidable. Instruments based on the differential optical absorption spectroscopy (DOAS) technique are widely used for monitoring air pollutants in urban areas in recent years. In this study, $O_3$, SO$_2$, NO$_2$, and VOCs (benzene, toluene, xylene, and styrene) are measured continuously at Sihwa industrial area using a DOAS from February to November. 1999. Intercomparison between the DOAS method and the conventional methods (filed point samplers for $O_3$, NO$_2$, and SO$_2$, and adsorbent sampling methods and gas chromatography for VOCs) are performed simultaneously at the same site. The time series of the DOAS data and that of fixed point method show good match at the view point of the tendency, but the absolute concentration values of these two methods differ quite a lot from each other; correlation coefficients shows 0.78 for $O_3$and 0.97 for SO$_2$. However, the results of VOCs measurements are not quite satisfactory ; the spectral interference with $O_2$and $O_3$appears to be the major cause of the errors for VOCs .

• Environmental Engineering Research
• /
• 제22권4호
• /
• pp.339-346
• /
• 2017

The objective of this study is the evaluation of the performance of a large-scale respirometer (LSR) of 17.7 L in the determination of the methane generation rate constant (k) values. To achieve this objective, a comparison between anaerobic (GB21) and LSR tests was conducted. The data were modeled using a linear function, and the resulting correlation coefficient ($R^2$) of the linear regression is 0.91. This result shows that despite the aerobic conditions, the biodegradability values that were obtained from the LSR test produced results that are similar to those from the GB21 test. In this respect, the LSR test can be an indicator of the anaerobic biodegradability for landfill waste. In addition, the results show the high repeatability of the tests with an average coefficient of variance (CV) that is lower than 10%; furthermore, the CV for the LSR is lower than that of the GB21, which indicates that the LSR-test method could provide a better representation of waste samples. Therefore, the LSR method allows for both the prediction of the long-term biodegradation potential in a shorter length of time and the reduction of the sampling errors that are caused by the heterogeneity of waste samples. The k values are $0.156y^{-1}$ and $0.127y^{-1}$ for the cumulative biogas production (GB21) and the cumulative oxygen uptake for the LSR, respectively.

• 한국컴퓨터산업학회논문지
• /
• 제4권4호
• /
• pp.455-466
• /
• 2003

호주에 있는 사례연구로 캔버라관광 웹사이트를 채택함으로써 복잡한 의사결정과정에 적용된 인터넷 기능들에 대한 온라인 관광객들의 선호도를 조사하기 위해서 자의적 선택 웹 조사방법이 사용되었다 모집단으로서 이미 알려진 집주소와 전화번호들을 갖고 있는 우편조사와 전화조사와 같은 다른 전통적인 조사방법에 비해 웹에 기초한 조사방법을 사용하기에는 아직 시기상조이다. 이 연구에서 채택된 웹 조사 방법은 심각한 조사오류들을 발생시킬 수 있는 알려진 모집단이 없는 비확률표본추출에 의존하고 있다. 따라서 이 연구의 결과들은 자의적 선택 웹 조사에 대한 신뢰성을 확인하기 위하여 공식적으로 발행된 통계 자료들과 비교될 필요가 있다. 금번 연구조사는 자의적 선택 웹 조사방법이 어느 정도까지 타당화 될 수 있는 지를 논의한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.471-474
• /
• 2006

Several planktonic dinoflagellates, including Cochlodinium polykrikoides (p), are known to produce red tides responsible for massive fish kills and serious economic loss in turbid Northwest Pacific (Korean and neighboring) coastal waters during summer and fall seasons. In order to mitigate the impacts of these red tides, it is therefore very essential to detect, monitor and forecast their development and movement using currently available remote sensing technology because traditional ship-based field sampling and analysis are very limited in both space and temporal frequency. Satellite ocean color sensors, such as Sea-viewing Wide Field-of-view Sensor (SeaWiFS), are ideal instruments for detecting and monitoring these blooms because they provide relatively high frequency synoptic information over large areas. Thus, the present study attempts to evaluate the red tide index methods (previously developed by Ahn and Shanmugam et al., 2006) to identify potential areas of red tides from SeaWiFS imagery in Korean and neighboring waters. Findings revealed that the standard spectral ratio algorithms (OC4 and LCA) applied to SeaWiFS imagery yielded large errors in Chl retrievals for coastal areas, besides providing false information about the encountered red tides in the focused waters. On the contrary, the RI coupled with the standard spectral ratios yielded comprehensive information about various ranges of algal blooms, while RCA Chl showing a good agreement with in-situ data led to enhanced understanding of the spatial and temporal variability of the recent red tide occurrences in high scattering and absorbing waters off the Korean and Chinese coasts. The results suggest that the red tide index methods for the early detection of red tides blooms can provide state managers with accurate identification of the extent and location of blooms as a management tool.

• 대한원격탐사학회지
• /
• 제33권1호
• /
• pp.1-13
• /
• 2017

This study investigates the geometric and spatial image quality analysis of KOMPSAT-3A stereo pair. KOMPSAT-3A is, the latest satellite of KOMPSAT family, a Korean earth observation satellite operating in optical bands. A KOMPSAT-3A stereo pair was taken on 23 November, 2015 with 0.55 m ground sampling distance over Terrassa area of Spain. The convergence angle of KOMPSAT-3A stereo pair was estimated as $58.68^{\circ}$. The investigation was assessed through the evaluation of the geopositioning analysis, image quality estimation and the accuracy of automatic Digital Surface Model (DSM) generation and compared with those of KOMPSAT-3 stereo pair with the convergence angle of $44.80^{\circ}$ over the same area. First, geopositioning accuracy was tested with initial rational polynomial coefficients (RPCs) and after compensating the biases of the initial RPCs by manually collected ground control points. Then, regarding image quality, relative edge response was estimated for manually selected points visible from two stereo pairs. Both of the initial and bias-compensated positioning accuracy and the quality assessment result expressed that KOMPSAT-3A images showed higher performance than those of KOMPSAT-3 images. Finally, the accuracy of DSMs generated from KOMPSAT-3A and KOMPSAT-3 stereo pairs were examined with respect to the reference LiDAR-derived DSM. The various DSMs were generated over the whole coverage of individual stereo pairs with different grid spacing and over three types of terrain; flat, mountainous and urban area. Root mean square errors of DSM from KOMPSAT-3A pair were larger than those for KOMPSAT-3. This seems due to larger convergence angle of the KOMPSAT-3A stereo pair.

• 전자공학회논문지SC
• /
• 제37권2호
• /
• pp.37-42
• /
• 2000

본 논문에서는 파이프라인드 구조의 빠른 변환 속도와 축차비교 구조의 저전력 구조를 이용하여 고속, 저전력 아날로그 디지털 변환기를 제안하였다. 제안된 구조의 변환 방법은 축차비교 구조의 변환에서 비교기를 파이프라인드 구조로 연결하여 홀드된 주기에 비교기의 기준 전위를 전 비교기의 출력 값에 의해 변환하도록 하여 고속 동작이 가능하도록 하였다. 제안된 구조에 의해 8비트 아날로그 디지털 변환기를 0.8㎛ CMOS공정으로 HSPICE를 이용하여 시뮬레이션한 결과, INL/DNL(Integral Non-Linearity/Differential Non-Linearity)은 각각 ±0.5/±1이었으며, 100㎑ 사인 입력 신호를 10MS/s로 샘플링 하여 DFT(Discrete Fourier Transform)측정 결과 SNR(Signal to Noise Ratio)은 41㏈를 얻을 수 있었다. 10MS/s의 변환 속도에서 전력 소모는 4.14㎽로 측정되었다.

• 전자공학회논문지
• /
• 제52권2호
• /
• pp.162-170
• /
• 2015

컴뮤트 타임 임베딩을 구현하려면 그래프 라플라시안 행렬의 고유값과 고유벡터를 구하여야 하는데, $o(n^3)$의 계산량이 요구되어 대용량 데이터에는 적용하기 어려운 문제가 있다. 이를 줄이기 위하여 표본화 과정을 통하여 크기가 줄어든 그래프 라플라시안 행렬에서 구한 다음, 원래의 고유값과 고유벡터를 근사화시키는 Nystr${\ddot{o}}$m 기법을 주로 채택한다. 이 과정에서 많은 오차가 발생하는데, 이를 개선하기 위하여 본 논문에서는 그래프 라플라시안 대신에 가중치 행렬을 표본화하고 이로부터 구한 고유값과 고유벡터를 그래프 라플라시안의 고유값과 고유벡터로 변환하는 기법을 이용하여 대용량 데이터로 구성된 스펙트럴 그래프를 근사적으로 컴뮤트 타임 임베딩하는 기법을 제안한다. 하지만, 이 방식도 스펙트럼 분해를 계산하여야 하므로 데이터의 크기가 증가하면 적용하기 어려운 문제가 발생한다. 이의 대안으로, 스펙트럼 분해를 계산하지 않고도 데이터 집합의 크기에 영향을 받지 않으면서 컴뮤트 타임을 근사적으로 계산하는 방식을 구현하고 이들의 특성을 실험적으로 분석한다.