• 지질공학
• /
• 제18권3호
• /
• pp.331-338
• /
• 2008

다양한 조건의 관정에 지하수를 채수할 수 있는 샘플러를 개발하고 평가하였다. 이 샘플러는 공압 튜브, 공압 실린더, 주사기 바늘 그리고 샘플병으로 구성되며, 공기압을 동력원으로 사용한다. 공압 실린더는 주사기 바늘을 샘플병의 고무마개에 관통시키는 기능을 담당하며, 샘플병 고무마개를 관통한 주사기 바늘은 샘플병으로의 지하수 유입 통로 역할을 담당한다. 샘플러 현장시험은 해수의 영향으로 수질이 주기적으로 변화하는 제주 한동지역의 해수침투 관측정을 대상으로 하였다. 샘플러의 내부와 외부에 CTD Diver를 장착하고 관정내 동일 심도에서의 샘플링을 여러 차례 반복하면서 샘플링 단계별 전기전도도와 압력 변화를 측정하였다. 시험 결과, 샘플러를 작동시킬 때에만 지하수가 샘플러로 유입되며, 샘플러 내부와 외부에서 측정한 지하수의 전기전도도와 압력은 거의 일치하는 것이 확인되었다. 이러한 결과는 이 연구에서 제시한 샘플러를 이용하여 채수한 지하수 시료들이 샘플러 설치 심도의 샘플링 시간대의 지하수 수질을 정확하게 반영하고 있음을 지시한다.

• 한국안전학회지
• /
• 제32권1호
• /
• pp.21-26
• /
• 2017

An IoT-based particulate matter (PM2.5) sensing device (PSD) is developed. The PSD consists of a PM2.5 sensor, signal processing circuit, and wi-fi enabled-microprocessor along with temperature and humidity sensors. The PSD estimates PM2.5 density by measuring light scattered by PM2.5. To gauge performance of the PSD, PM2.5 density of open air was measured with the PSD and compared with that of the collocated-government-certified measuring station. Measurements were taken at a sampling frequency of 100 Hz and moving-averaged to remove measurement noise. When compared to the result of the measuring station, average percentile error of PM2.5 density from the PSD is found to be 31%. A correlation coefficient is found to be 0.72 which indicates a strong correlation. Instantaneous variation, however, may far exceed average errors, leading to a conclusion that the PSD is more suitable for estimating average trend of PM2.5 density variations than estimating instantaneous PM2.5 density.

• 한국CDE학회논문집
• /
• 제9권4호
• /
• pp.277-285
• /
• 2004

In this paper, a 2 DOF haptic yawing joystick for use as the navigation input device in virtual environments is introduced. The haptic yawing joystick has 360° range for yawing motion and ±100° for pitching motion. The device can support weights of up to 26N for χ axis and 10N for axis with 10kHz of sampling rate. The size of the haptic yawing joystick is so small that it can be assembled on armrest of an arm chair and has relatively larger work space than other conventional 2 DOF joysticks. For the haptic yawing joystick, an ellipse navigation algorithm using the user's velocity in the virtual navigation is proposed. The ellipse represents the velocity of the user. According to the velocity of the navigator, the ellipse size is supposed to be changed. Since the path width of navigation environments is limited, the ellipse size is also limited. The ellipse navigation algorithm is tested in 2 dimensional virtual environments. The test results show that the average velocity of the navigation with the algorithm is faster than the average navigation velocity without the algorithm.

• 한국음향학회지
• /
• 제14권2호
• /
• pp.30-39
• /
• 1995

본 논문에서는 A/D변환 모듈, 신호처리 모듈, VXI 인터페이스 모듈의 하드웨어를 구성하였고 신호처리 모듈과 VXI 인터페이스 모듈 각각에 연산 및 제어용 소프트웨어를 구현하였다. FFT 분석 디바이스의 실시간 대역폭은 100KHZ라고 말할 수 있다. 샘플링을 200KHz에서 point수 2048의 연산 파라미터 하였을 때 20KHz 입력신호의 정현파, 삼각파 및 구형파에 대한 결과를 Hewlett-Packard 3562A Dynamic Signal Analyzer낱 이용한 FFT 분석결과와 각각 비교하였다 주파수 SPAN을 0-100KHz까지로 하고 출력범위를 -40dBV 에서 30dBV 까지로 하였을 때의 결과로서 매우 정확하게 분석됨을 알 수 있었으며, 입력주파수를 10KHz, 20KHz, 50KHz로 각각 주었을 때의 결과를 비교했을 때 원하는 결과를 얻을 수 있다.

• 기본간호학회지
• /
• 제19권4호
• /
• pp.434-443
• /
• 2012

Purpose: This study was conducted to investigate sleep patterns in nursing students as measured by an automated wireless sleep tracker and self-reported sleep scales. Methods: Data were collected from October, 2011 to May, 2012. ZQ (a symbolic number that measures the quality and quantity of sleep) was calculated from the automated wireless sleep tracker. Pittsburgh Sleep Quality Index-Korean version, Sleep scale A, and sleep satisfaction were used as self-report sleep scales. Female nursing college students (n=37) were recruited by convenience sampling. Before going to bed, they were asked to put on a head-band type sleeping sensor and to move it the next morning. Every student slept 2~4 nights with the sleep tracker. Data were collected for 86 (91.4%) of 94 nights' sleep. The students were also requested to fill in the PSQI-K, sleep scale A, and sleep satisfaction. Results: The only statistically significant correlation was between ZQ and sleep satisfaction (r=.869, p=.026). The biggest obstacle in using this device was putting on the head-band type sensor. Conclusion: Validity of the wireless sleep tracker was verified in part. The usefulness of this device in nursing research and practice was identified. Further evaluation need to be conducted with various populations.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.145-147
• /
• 2009

This research measures EEG signals which are generating on head skin and extracts brain concentration level related with brain activity. We have developed concentration wireless transmission system by displaying this EEG signal on PDA mobile device. The front head was used for measuring EEG signal and INA128 with TL084 and analog elements was used for measuring EEG signal, amplifying and filtering the signal. Measured analog EEG signals changed into digital signals by using ADC of PIC24FJ192 with 10bit resolution and 500Ks/s sampling rate. So The changed digital signals have transmitted to the PDA by using bluetooth. LabView 8.5 was also used for FFT transformation, frequency and spectrum analysis of the transferred EEG signal. As a result, $\alpha$ wave, $\beta$ wave, $\theta$ wave and $\delta$ wave were classified. we extracted the concentration index by adapting concentration extraction algorithm. This concentration index was transferred into PDA by wireless module and displaying.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.438-443
• /
• 2006

The probe type sensor using strain gauges was used to track a container box's seam in this paper. A strain gauge has a property which the specific resistance is changed by varying of the sectional area and length when tensile and compressive stresses are generated at the strain gauge. We designed the automatic seam tracking device by attaching the probe type strain gauge sensor, motor driving slide, encorder to check the moving distance and interface card connected MPU upside the speed controllable carriage. The folded work piece for a container box is made to examine whether the device can track the seam automatically or not. Seam tracking experiments were done by changing the carriage moving speed at 300. 400. 500. 600[mm/min] each as the voltage of side track was 2.5[V]. We compared and analyzed the sampling data which is obtained by output voltage of strain gauge sensor and rotary encorder pulse every 100 [m/s]. The welding experiments were performed by using $CO_2$ welding machine about the carriage moving speed that has good seam tracking condition in the seam tracking experiments above. And we compared the seam tracking status.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.8-14
• /
• 2014

Pulverized coal (PC) has become an important auxiliary fuel in the iron and steel industry since the technique of pulverized coal injection (PCI) was developed for iron making. The combustion efficiencies of pulverized coal in blowpipes and tuyeres under various operational conditions are numerically predicted to determine the performance levels with regard to different locations of the nozzles in a blast furnace. A variety of parameters, including the pulverized coal quantities, oxygen amounts, inlet temperatures of the tuyeres, and the mass flow rate of coal carrier gas are taken into consideration. Also, in order to develop greater efficiency than those of existing coal injection systems, this study applies a flame measurement system using a charge-coupled device (CCD) camera and a frame grabber. It uses auto sampling algorithms from the flame shape information to determine the device for the optimal location control for PCI. This study finds further improvements of the blast furnace performance via the control of the PCI locations.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3163-3168
• /
• 2008

Pulverized coal (PC) has become an important auxiliary fuel in the iron and steel industry since the technique of pulverized coal injection (PCI) system was developed for iron making. Combustion efficiencies of pulverized coal in blowpipes and tuyeres under various operational are numerically predicted to recognize the performance with the locations of nozzles in a blast furnace. A variety of parameters including the pulverized coal quantities, oxygen amounts, inlet temperature of the tuyeres and mass flow rate of coal carrier gas are taken into consideration. Also In order to develop more efficient than existing coal injection system, this study applies a flame measurement system using a charge couple device (CCD) camera and frame grabber. And it has used algorithms of auto sampling from flame shape information and composed the device for location control of PCI. This study find to further improve the blast furnace performance by the control of PCI locations.

• 한국정보통신학회논문지
• /
• 제19권11호
• /
• pp.2623-2628
• /
• 2015

대기오염물질 배출은 다른 오염물질과는 다르게 일단 배출하고 나면 대기 중으로 빠르게 확산되어 단속이 어렵다. 또한 현장 적발하였다하더라도 시료채취가 어려워 적극적인 대기 오염행위 적발, 단속을 위한 지도 점검 및 관련법 개선이 필요하다. 본 논문에서는 대기오염방지를 위해 배출되는 대기오염물질을 측정하고 오염도를 신속히 파악하여 대기오염을 사전에 방지하는 측정방법에 대하여 연구한다. 이를 위하여 휴대가 간편한 스마트폰으로 사진을 찍고 DOM 방법으로 굴뚝연기의 혼탁도를 계산하는 모바일 디바이스용 측정 모듈을 설계하고 구현한다.