• The korean journal of orthodontics
• /
• v.26 no.1 s.54
• /
• pp.33-41
• /
• 1996

Retrostpective study of two groups of patients was conducted to evaluate the physiologic drift of the mandibular teeth following the extraction of four first premolars. The concept of physiologic drift, commonly referred to as 'driftodontics', following first premolar extractions has been gaining acceptance in the orthodontic community, the exact nature and amount of drift has not been adequately documented. There were also no guide lines as to when drift should be allowed to now. The purpose of this study was to quantify physiologic drift of the untreated mandibular dentition following extraction of the four first premolars during the early permanent and late permanent dentition stages. The early permanent dentition extraction sample(Group 1) included 26 Patients and the mean age at pretreatment was approximately 13.5 years. The observation period following extraction was approximately 6.96 months. The late permanent dentition extraction sample(Group 2) included 31 patients. The mean age at pretreatment was 21.3 years, followed by a observation period of 7.26 months. During the observation period, except for the extractions, no other mandibular therapy was rendered. Pre-and post-treatment lateral cephalograms and dental casts were analyzed. The obtained results were as follows 1. Group 2 showed marked changes in movements of the mandibular incisors and canines but minimal changes in molars. 2. The amount of changes in movements of the mandibular incisors and canines were significantly greater in Group 1 than in Group 2. The results showed no differences in rates of molar movements between groups. 3. Physiologic drift of the dentition produced desirable changes such as decreased Incisor Irregularity.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.753-761
• /
• 2005

In this study, pretreatment of organic matters with $MIEX^{(R)}$ was evaluated using bench-scale experimental procedures on four organic matters to determine its effect on subsequent UF membrane filtration. For comparison, coagulation process was also used as a pretreatment of UF membrane filtration. Moreover, the membrane fouling potential was identified using different fractions and molecular weights of organic matters. From the removal property of MW organic matters by coagulation process for the sample water NOM and AOM, the removal efficiency of high MW organic matters were much higher than those of low MW organic matters. It was shown that the removal efficiency of high MW organic matter more than 10 kDa was lower than that of low MW organic matter for $MIEX^{(R)}$ process. For the change of permeate flux by the pretreatment process, $MIEX^{(R)}$+UF process showed high removal efficiency of organic matter as compared with coagulation-UF processes, but high reduction rate of permeate flux was presented through the reduction of removal efficiency of high MW organic matter. From sequential filtration test results in order to examine the effect of MW of organic matter on membrane fouling, it was found that the membrane foulant was occurred by high MW organic matter, and the DOC of organic matter less than 0.5 mg/L was working as the membrane foulant. In the case of sample water composed of low MW organic matter less than 10 kDa, since the low MW organic matter less than 10 kDa has high removal efficiency by $MIEX^{(R)}$, low reduction rate of permeate flux is obtained as compared with coagulation-UF processes. In summary, it is required to conduct the research on physical/chemical characteristic of original water before pretreatment process of membrane process is selected, and a pertinent pre-treatment process should be employed based on the physical/chemical characteristic of original water.

• The Journal of Information Systems
• /
• v.25 no.1
• /
• pp.49-73
• /
• 2016

Purpose Though many information systems researchers have made various attempts to investigate the relationship between information technology capability and firm performance from diverse perspectives, we have not come to a conclusion yet with some mixed results. In this research, focusing on the adoption of Enterprise Resource Planning (ERP) systems by firms as a proxy measure for information technology capability, we reexamine whether the association is significantly positive. Design/methodology/approach Previous research on this topic had some limitations to the samples and analysis method. Some research focused only on the 1990s or early 2000s, and other studies failed to adequately compare the impact of ERP adoption on firm performance between the treatment group and the control group. In this research, extending previous analysis approaches with the matched sample comparison of IT leaders and the control group, we attempt to apply propensity score matching in combination with difference-in-difference analysis with a sample of Korean firms that adopted ERP systems in the late 2000s. We match ERP adopters and non-adopters with propensity score matching and compare their financial performance with difference-in-difference estimation between the pre- and post-adoption periods. Findings According to our analysis, we find no positive and significant relationship between ERP adoption and firm performance in profit ratios. This research shows that, contrary to the era of proprietary information systems, standardized information systems today have no additional competitive advantages over competitors.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.513-518
• /
• 2005

Capillary electrophoresis (CE) method was developed to determine (+)-catechin and (-)-epicatechin contents in grape seed ethanol extract. CE separation was achieved using 100 mM phosphate and borate buffer at pH 6.0 as background electrolyte and fused silica capillary with 50 microns x 375 microns O.D. (effective length 20.0cm) maintained at $25^{\circ}C$. The applied voltage was 10kV, and detection was performed by DAD at 210 nm, Two catechins were well separated within 6 min with repeatability of <0.8% RSD for migration time and <2.0% RSD for peak area, and correlation coefficients higher than 0.994 were obtained from 58.0 to 174.0 mg/L with detection limit of 0.035 mg/L. Separated compounds were successfully determined. CE method was easy to handle and showed good reproducibility. CE method was compared with conventional coloring and HPLC methods, and main advantages of CE method were low amount of sample required, simple pre-sample treatment, good recovery rate, and short analysis time.

• Journal of Korean Academy of Nursing
• /
• v.29 no.2
• /
• pp.418-428
• /
• 1999

The main purpose of this study was to identify the effects of group social support and individual social support on the reduction of burden and improvement in family functioning of families with asthmatic children. The design of this study was a randomized pre-posttest quasi-experimental design to compare the two experimental groups. The theoretical framework for this study was derived from the study of burden in family caregivers by Suh and Oh (1993) based on the main effect model of social support theories. The data were collected from February 12, 1998 to May 29, 1998 at the pediatric out patient department of a university hospital located in Suwon city. The sample consisted of 39 family members who were identified as families with asthmatic children, Eighteen subjects were randomly assigned to the group social support group and 21 were assigned to the individual social support group. Group and individual social support members were seen for 60 to 90 minutes, four times over one to three weeks. The instruments used in this study were the Burden Scale developed by Suh & Oh(1993), the Visual Analogue Scale, and the Family Adaptability Cohesion Evaluation Scale(FACES-III) developed by Olson, Portner, and Lavee(1985). The collected data were analyzed using Mann-Whitney test, x$^2$-test, Wilcoxon sign rank test, t-test, ANOVA (Scheff), Pearson correlation coefficient. multiple regression, and social support process and content analysis. The results are as follow : 1. There was no significant difference before the experimental treatment among the subjects in the group social support group and individual social support group for general characteristics, burden, or family functioning. 2. Hypothesis 1 : “There will be a greater reduction on the burden score of the group social support group compared to the individual social support group” was not statistically significant(U＝174.5, p＝.683). The burden scores showed a significant decrease after participation in social support as compared to before participation for both groups. However there was a tendency for more reduction in the burden scores for the group social support than for individual social support. 3. Hypothesis 2 : “There will be a greater improvement in the family functioning scores for the group social support group compared to the individual social support group” was not statistically significant(U＝153.0. p＝.309). There was a tendency toward improvement in the family functioning scores of the group social support as compared to that of the individual social support. 4. According to the length of the treatment period, families with asthmatic children displayed affirmative responses, and the families set up a self-help group of mothers with asthmatic children in order to share their experiences, to get information and to solve their problems. In conclusion, it was found that group social support was the more effective nursing intervention for reducing burden and for improving family functioning of families with asthmatic children.

• The korean journal of orthodontics
• /
• v.31 no.5 s.88
• /
• pp.535-548
• /
• 2001

The purpose of this study was to evaluate changes in soft tissue chin thickness and to investigate correlations between hard and soft tissues measurements after orthodontic treatment conducted by premolars extraction and incisor retraction. The sample consisted of 35 female adults with Angle classification class I or class II division 1 malocclusion. Using lateral cephalometric radiographs taken before and after treatment, hard and soft tissue structures were measured and reproducible six landmark on soft chin tissue were used to locate the various points of soft tissue contour of the chin. The res에ts were as follows : 1. There were signigicant correlations between pretreatment B-B', Pm-Pm' and pretreatment vortical skeletal measurements such as $MP{\perp}HP,\;MP{\perp}PP$, ALFH and between a-a', b-b', Me-Me' and measurements of sym-physeal morphology such as SL, SW, PL. 2. There were significant decreases at B-B', Pm-Pm' and significant increases at a-a', b-b' between pre-and posttreatment mea surements. 3. There were significant correlations among soft tissues changes and hard tissue changes except for changes at B-B' and the range of correlation coefficient was about 0.3-0.4. 4. There were significant differences at ${\Delta}UI-VP,\;LI{\perp}, and B-B' measurements between subgroups divided by posttreatment Pog-Pog' changes. 5. There were significant differences at ${\Delta}overbite,\;NPog{\perp}HP,\;and\;Me-Me'$ measurements between subgroups divided by posttreatment Me-Me' changes.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.101-113
• /
• 2020

This study aimed to explore how effective explicit form-focused instruction (FFI) is in teaching the schwa vowel /ə/ to EFL students in a classroom setting. The participants were 25 female high school students, who were divided into the experimental group (n=13) and the control group (n=12). One female American also participated in the study for a speech sample as a reference. The treatment, which involves shadowing model pronunciation by the researcher and a free text-to-speech software and the researcher's feedback in a private session, was given to the control group over a month and a half. The speech samples, for which the participants read the 14 polysyllabic stimulus words followed by the sentences containing the words, were collected before and after the treatment. The paired-samples t test and non-parametric Wilcoxon signed-rank test were used for analysis. The results showed that the participants of the experimental group in the post-test reduced the duration of the schwa by around 40 percent compared to the pre-test. However, little effect was found in approximating the participants' distribution patterns of /ə/ measured by the F1/F2 formant frequencies to the reference point, which was 539 Hz (F1) by 1797 Hz (F2). The findings of this study suggest that explicit FFI with multiple repetitions and corrective feedback is partly effective in teaching pronunciation.

• Journal of Digital Convergence
• /
• v.16 no.4
• /
• pp.343-354
• /
• 2018

This sturdy proposed and tested whether the six core treatment processes of Acceptance and Commitment Therapy (ACT) reduce self-criticism and dichotomous thinking in Evaluative concerns perfectionists and even diminish depression and ultimately verify it. The sample consisted of 22 subjects who displayed high EC perfectionism and depression. The subjects were randomly assigned to ACT groups or control groups (n-11/each). The ACT program was administered in eight sessions. All participants completed scale about EC perfectionism, self-criticism, dichotomous thinking, depression and acceptance & action at the pre-test, post-test, and the six week follow-up. The results showed that evaluative concerns perfectionism, self-criticism, dichotomous thinking, and depression decreased more in the treatment group than in the control group, whereas acceptance & action increased in the former. Finally, the implications and limitations of this study, along with suggestions for future study were discussed.

• IMMUNE NETWORK
• /
• v.10 no.6
• /
• pp.239-246
• /
• 2010

Background: Monoclonal antibodies (mAbs) recognizing Class III epitope of CD34 are essential for flow cytometric diagnosis of leukemia. Methods: 27H2 mAb was developed from a mouse alternatively immunized with human acute leukemia cell lines, KG1 and Molm-1. Using flow cytometric analysis of various leukemic cell lines and peripheral blood, immunohistochemical study of frozen tonsil, we characterized 27H2 mAb. Antigen immunoprecipitated with 27H2 mAb immunobloted with anti-CD34 mAb. A case of bone marrow sample of acute lymphoblastic leukemia (ALL) patient was obtained at CBNU Hospital. For epitope identification enzyme treatment with neuraminidase and O-sialoglycoprotein endopeptidase (OSGE) and blocking assay with known classIII mAb (HPCA-2) were done. Results: Only KG1 and Molm-1 revealed positive immunoreactivity. Immunohistochemical staining disclosed strong membranous immunoreactivity on high endothelial venules. Antigen immunoprecipitated by 27H2 mAb showed approximately 100 kDa sized band immunoblotted with anti-CD34 under non-reducing conditions. Epitope recognized by 27H2 mAb disclosed resistancy to both neuraminidase and OSGE treatment and completely blocked with known class III mAb preincubation. CD34 positive leukemic cells in BM of pre B cell ALL patient detected by FITC-conjugated 27H2 and HPCA-2 were identified with similar sensitivity. Conclusion: A novel murine mAb recognizing class III epitope of human CD34 with high affinity, which is useful for flow cytometric diagnosis of leukemia, was developed.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.77-77
• /
• 2017

Titanium and its alloys offer attractive properties in a variety of applications. These are widely used for the field of biomedical implants because of its good biocompatibility and high corrosion resistance. Titanium anodizing is often used in the metal finishing of products, especially those can be used in the medical devices with dense oxide surface. Based on SAE/AMS (Society of Automotive Engineers/Aerospace Material Specification) 2488D, it has the specification for industrial titanium anodizing that have three different types of titanium anodization as following: Type I is used as a coating for elevated temperature forming; Type II is used as an anti-galling coating without additional lubrication or as a pre-treatment for improving adherence of film lubricants; Type III is used as a treatment to produce a spectrum of surface colours on titanium. In this study, we have focused on Type II anodization for the medical (dental and orthopedic) application, the anodized surface was modified with gray color under alkaline electrolyte. The surface characteristics were analyzed with Focused Ion Beam (FIB), Scanning Electron Microscopy (SEM), surface roughness, Vickers hardness, three point bending test, biocompatibility, and corrosion (potentiodynamic) test. The Ti-6Al-4V alloy was used for specimen, the anodizing procedure was conducted in alkaline solution (NaOH based, pH>13). Applied voltage was range between 20 V to 40 V until the ampere to be zero. As results, the surface characteristics of anodic oxide layer were analyzed with SEM, the dissecting layer was fabricated with FIB method prior to analyze surface. The surface roughness was measured by arithmetic mean deviation of the roughness profile (Ra). The Vickers hardness was obtained with Vickers hardness tester, indentation was repeated for 5 times on each sample, and the three point bending property was verified by yield load values. In order to determine the corrosion resistance for the corrosion rate, the potentiodynamic test was performed for each specimen. The biological safety assessment was analyzed by cytotoxic and pyrogen test. Through FIB feature of anodic surfaces, the thickness of oxide layer was 1.1 um. The surface roughness, Vickers hardness, bending yield, and corrosion resistance of the anodized specimen were shown higher value than those of non-treated specimen. Also we could verify that there was no significant issues from cytotoxicity and pyrogen test.