• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.2
• /
• pp.204-209
• /
• 2001

The effects of size distribution of oil particles on the emulsion stability of mayonnaise were studied as follows; The stability of mayonnaise has concerned closely with the viscosity and the size distribution of oil particles. Mostly, if the viscosity was increased, the stability was improved, and the distribution of oil particles was uniform and the less the variation, the more the stability. 75% of oil concentration of sample showed the highest viscosity, also the size of sample was the most uniform, compared to other concentration. Mayonnaise prepared with whole egg was unstable, and the size of oil particles was double larger than the case prepared with only the yolk. Addition of xanthan gum increased, the viscosity and the stability by centrifuge so that the more stable mayonnaise could be prepared. The result of using log-normal density function by Heldmann represented that the normal size of sample adding 0.6%-soluble starch and sample N in non-adding control was increased, while those of sample adding xanthan gum and soluble starch at the same time didn't change.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.204-207
• /
• 2003

The flip chip bonding utilizing self-aligning characteristic of solder becomes mandatory to meet to tolerances for the optical device. In this paper, a parametric study of aging condition and pad size of sample was conducted. A TiW/Cu UBM structure was adopted and sample was aging treated to analyze the effect of intermetallic compound with time variation. After aging treatment, the tendency to decrease in shear strength was measured and the structure of the fine joint area was observed by using SEM, TEM and EDS. In result, the shear strength was decreased of about 20% in the $100{\mu}m$ sample at $170^{\circ}C$ aging compared with the maximum shear strength of same pad size sample. In the case of the $120^{\circ}C$ aging treatment, 17% of decrease in shear strength was measured at the $100{\mu}m$ pad size sample. Also, intremetallic compound of $Cu_6Sn_5$ and $Cu_3Sn$ were observed through the TEM measurement by using an FIB technique that is very useful to prepare TEM thin foil specimens from the solder joint interface.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.428-432
• /
• 2012

Polyamidimide (PAI)-colloidal silica (CS) nanohybrid films were synthesized by an advanced sol-gel process. The synthesized PAI-CS hybrid films have a uniform and stable chemical bonding and there is no interfacial defects observed by TEM. The thermal degradation ratio of PAI-CS (10 wt%) hybrid films is delayed by 100 ℃ compared with pure PAI sample determined by on set temperature range in TGA. The dielectric constant of PAI-CS (10 wt%) hybrid films decreases with increasing CS content up to about 5 wt% but increases at higher CS content, which is not explained simply by effective medium therories (EMT). The duration time of PAI-CS (10 wt%) hybrid coil is 38 sec, which is very longer than that of pure PAI coil sample. The PAI-CS (10 wt%) hybrid film has a higher breakdown voltage resistance than the pure PAI film at surge environment and exhibits superior heat resistance. The PAI-CS (10 wt%) sample shows the advanced and stable thermal emission properties in transformer module compared with the pure PAI sample. This result illustrates that the advanced thermal conductivity and expansion properties of PAI-CS sample in the case of appropriate sol-gel processes brings the stable thermal emission in transformer system. Therefore, new PAI-CS hybrid samples with such stable thermal emission properties are expected to be used as a high functional coating application in ET, IT and electric power products.

• Korean Management Science Review
• /
• v.27 no.1
• /
• pp.91-105
• /
• 2010

We proposed and stratified a selection standard model on Open Source Functional Board which could be found in Web. So we could grasp the weight about Performance Evaluation from the viewpoints of planners, developers, and web disigner professional of views. We suggested applying diverse measurement types in case of item which could chart Evaluation Standards on chosen sample boards. In case of item which couldn't do that, we compared and analyzed it by using selective type of 9 point scaling method on professionalists in every sample board. As a result of weight on upper estimate section of evaluation model chart, the order of importance was convenience(0.334), performance(0.333), function(0.240) and design(0.093) respectively. It indicates that there is more weight on performance and convenience which are hard to be structurally modified than designs and functions that are directly shown to the users. Also, it was evident that opposite results came out when using 9-point scale survey and measurement with objective data such as function and performance. The reason is because the surveyed subject can have his or her own subjectivity and bias unlike objective data. However, objectivity of the administrator is also an important factor thus both two perspectives have to be all considered when selecting the bulletin board.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.6
• /
• pp.128-133
• /
• 2014

In this study, Two kinds of pad models with different configurations as the part of brake system are investigated by structural and fatigue analyses. As the maximum equivalent stress of model 2 becomes higher to the extent of 60% than that of model 1, model 2 can endure more load than model 1. In cases of two kinds of models, the maximum fatigue life at 'Sample history' becomes longer 60 times than 'SAE bracket history' and this life in case of 'SAE transmission' becomes longer 3.5 times than the case of 'SAE bracket history'. Maximum fatigue damages in cases of 'SAE bracket history', 'SAE transmission' and 'Sample history' at model 1 become higher than model 2. Model 2 is thought to have more fatigue durability than model 1. These study results can be effectively utilized with the design of brake pad by anticipating and investigating prevention and durability against its fatigue damage.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.9
• /
• pp.587-592
• /
• 2015

In this study, the electrification voltage of electrostatics for silicone rubber sample($4cm{\times}4cm{\times}0.103cm$) following immersion with contaminants of 2 ml, 5 ml, 10 ml for six hours has been measured in through the applied voltage of 10 kV DC at temperature of $80^{\circ}C{\sim}110^{\circ}C$, humidity of 50%~90%. The results of this study are as follows. In case the contaminants is constant, it found that the electrification voltage of electrostatic decreased with increasing temperature and humidity to $35^{\circ}C$, 90%. In case of 2 ml of contaminants concentration, it found that the electrification voltage of electrostatic decreased with increasing temperature and humidity to $35^{\circ}C$, 50%. In case of the sample at temperature of $15^{\circ}C$ and humidity of 50%, it found that the electrification voltage of electrostatic decreased with increasing contaminants to 10 ml.

• Journal of Veterinary Clinics
• /
• v.20 no.4
• /
• pp.478-481
• /
• 2003

Canine juvenile cellulitis (CJC) is a well-recognized lymphocutaneous disease that is seen in young dogs. CJC seemed to be immunologic disorder and may have a hereditary aspect. Exact pathogenesis and cytokine regulation on the immune system of CJC are not clear. CJC was diagnosed in two puppies hospitalized in Veterinary Teaching Hospital of Chungbuk National University. To investigate the cytokine regulation on CJC, RT-PCR was performed with CJC affected dogs. RT-PCR 1 was performed with whole blood sample (CJC-B) and fine needle aspirates of the inguinal lymph node (CJC-LN) from case 1-dog, which included $TNF-\alpha,$ $IL-1\beta,$ $IFN-\gamma,$ IL-2, IL-4, IL-5, IL-6, IL-8, IL-10, IL-12 and $\beta-actin.$ Blood sample from a normal dog (N-B) served for a negative control of RT-PCR 1 (case 1). $IFN-\gamma,$ IL-2, IL-4, IL-5, IL-8, IL-10 and IL-12 transcripts were not expressed in all sample. $TNF-\alpha$ and $IL-1\beta,$ were not transcripted from CJC-B but from CJC-LN. On RT-PCR 2 (case 2), submandibular lymph node aspirates were used and $TNF-\alpha,$ IL-10, $IFN-\gamma$ and $IL-1\beta$ were expressed. $TNF-\alpha,$ 1L-10 and $IFN-\gamma$ were secreted from activated macrophages enhance the inflammation in tissue. These results imply that abnormally increased macrophages secret $TNF-\alpha$ and $IL-1\beta$ in the affected lymph nodes, which attract neutrophils and cause inflammation in CJC.

• Korean Journal of Clinical Pharmacy
• /
• v.29 no.3
• /
• pp.147-155
• /
• 2019

Objectives: The purpose of this study was to investigate the association between fracture risk and proton pump inhibitor (PPI) use to establish evidence for defining high-risk groups of fracture among PPI users. Methods: A case-control study was performed using the National Health Insurance Sample Cohort Database from January 2002 to December 2013. The cases included all incidences of major fractures identified from January 2011 to December 2013, and up to four controls were matched to each case by age, gender, osteoporosis, and Charlson comorbidity index. Conditional logistic regression was used to calculate the adjusted odds ratio (aOR) and associated 95% confidence interval (CI). Results: Overall, 14,295 cases were identified, and 63,435 controls were matched to the cases. The aOR of fractures related to the use of PPIs was 1.06 (95% CI: 1.01-1.11). There was a statistically significant association between fracture and PPI use within 3 months of the last dose, and a trend of increasing fracture risk with increasing cumulative PPI dose. The risk of fracture was significantly higher in patients who took PPIs for more than 1 year during the 2-year observation period. Conclusion: Patients who have been using PPIs for more than 1 year should be warned about the risk of fracture during or at least 3 months after discontinuing the PPI.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.914-919
• /
• 2019

A mesocosm experiment considering water exchange was conducted to evaluate the change in the properties of contaminated coastal sediment. The contaminated coastal sediment sample was prepared by mixing with granulated coal ash(GCA), which is an alkaline industrial by-product. During one month of observation time, the phosphate concentration of the GCA sample case was measured to be 19.0 and 0.4 mg/L lower than that of the control sample at the pore water and overlying water, respectively. The hydrogen sulfide concentration of the GCA sample case was 5.0 mg/L, which is significantly lower than that of the control sample(112.5 mg/L). Further addition of GCA in the sediment reduced the concentrations of phosphate and hydrogen sulfide, and could enhance the adsorption reaction, when compared to the sediment without GCA. The dissolved oxygen concentration in the overlying water of the GCA sample was measured to be 3.47 mg/L higher than the control sample. From the above results, we confirmed that GCA is an effective material for reducing pollutants in coastal sediment.

• The Korean Journal of Applied Statistics
• /
• v.9 no.2
• /
• pp.161-169
• /
• 1996

In the design of the sampling, it is important to make a decision about the size of the sample to be selected from the population. We often have a problem to get the optical size of the sample to be considered for cost and time expended for selecting sample unit from highly skewed population. In this case, we give a graphical criterion with Take-all Stratum rate to choose a method and also illustrate the efficiency between the Neyman allocation and the cut-off method with real data.