• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.469-474
• /
• 2007

The aim of this study was to investigate the quality changes in Supraspinatus muscle of Hanwoo with different packaging methods, such as wrapped packaging (C), vacuum packaging (V) and modified atmosphere packaging (MA). These samples were stored for 25 days under $5^{\circ}C$. Each sample was evaluated for pH, volatile basic mitrogen (VBN) value, purge loss, hardness, meat color and microbial counts. From the results obtained, no significant differences were observed among treatments at the pH. The VBN values of MA were significantly lower than those of C. Also, MA was enhanced stability of meat color compared with other packaging methods during storage days. The purge loss was the most in the V samples, followed by the C and the MA was the lowest. Total bacteria counts of MA sample were significantly lower than those from C. Therefore, it has been concluded that MA could be used as an effective packaging since it extends the shelf life and improve the quality of Hanwoo supraspinatus m.

• Journal of Korean Society on Water Environment
• /
• v.16 no.4
• /
• pp.469-477
• /
• 2000

Bisphenol-A (BPA), a known endocrine disruptor, is a main building block of epoxy resin which is widely used as a coating agent in residential water storage tanks. Therefore, BPA leaching from the epoxy resin may have adverse effects on human health. The possibility of BPA leaching from three epoxy resins were tested with a modified KS D 8502 method at 20, 50, 75 and $100^{\circ}C$ in deionized water and the specified test water, respectively. BPA leached to the test water was identified using GC-MS and quantified with GC-FID after a sequential extraction and concentration. The results showed that BPA leaching has occurred in all three samples tested. The quantify of BPA leaching from unit area of epoxy resin coating was in the range of $10.677{\sim}273.120{\mu}g/m^2$ for sample A, 29.737~1734.045 for sample B and 52.857~548.778 for sample C depending on the test temperature, respectively. In general, the amount of BPA leaching increased as the water temperature increases. This result implies a higher risk of BPA leaching to drinking water during a hot summer season. In addition, microbial growth, measured by colony forming units, in epoxy coated water tanks was higher than that in a stainless steel tank suggesting that compounds leaching from epoxy resin may support the growth of microorganisms in a residential water holding tank.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.12
• /
• pp.107-116
• /
• 2021

In this study, a set of laboratory liquefaction test has been conducted using undisturbed samples collected from Songlim-park, Pohang where liquefaction phenomenon had been observed in 2017. Soil samples were frozen right after tube sampling to minimize the disturbances during transport, storage, and test preparation. Cyclic triaxial test has been carried out to evaluate the liquefaction resistance ratio of undisturbed soil samples. As a result, the liquefaction resistance ratio of samples collected from 8.0~8.8 m and 11.0~11.8 m were almost similar, and these values were approximately 0.04~0.07 larger than values estimated by simplified assessment method using field test results. It is expected that the application of undisturbed sample for the evaluation of liquefaction resistance could contribute to the economical design of geotechnical structures.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.29-35
• /
• 2012

In this paper, it is presented the method of image recovering which existing is only pixel processing, but suggesting method is concluding image clustering overlap degree after classfying around unit fixel to crowd pixel. Concluding overlap degree threshold value is after identifying pattern pixel and grasping geometry structure of sample pattern and deduction of deciding function. distinguishing feature space is above four dimension is reason of not visual observation of pattern structure. consideration of distribution structure is distance of center of crowd pixel, the number of each crowd pattern pixel and standard deviation. The over threshold value elimate the overlap image and the downward is recovered and established dynamic image. memory storage deduction of 20% and elevation of 15% performance is estimated in recovery of image.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.126-146
• /
• 2000

To develop and evaluate formaldehyde measurement method using 2,4-dinitro-phenylhydrazine (2,4-DNPH) coated sampler and gas chromatography, laboratory test and field test were conducted. Results of this study are as follows. Limit of detection(LOD) of measurement methods, HPLC-UVD, GC-NPD and GC-FID, is $0.008{\mu}g/m{\ell}$ $0.060{\mu}g/m{\ell}$, $0.472{\mu}g/m{\ell}$ respectively. Coefficiency of measurement methods, HPLC-UVD, GC-NPD and GC-FID, is 0.008, 0.009, 0.020 respectively. Desorption efficiency of sep-pak xposure aldehyde sampler and sorbent sample tube is 1.05(range : 0.99 - 1.12), 1.02(range : 0.99 - 1.06) respectively. Samples of sorbent sample tube and sep-pak xposure aldehyde sampler turned out to be stored at refrigerator, according to storage test results. Measurement methods of HPLC-UVD, GC-NPD, GC-FID, according to results of precision for the combined sampling and analytical procedure, became acceptable to OSHA evaluation standard. Field test using exposure chamber met the NIOSH overall uncertainty recommendation(less than 25%). Overall uncertainty of Sepak-HPLC(UVD), Tube-GC(NPD), Tube-GC(FID) is 11.0% - 17.0%. Consequently gas chromatography(GC-NPD, GC-FID) and high performance liquid chromatography(EPA TO-11) using 2,4-DNPH coated sampler for formaldehyde measurement turned out to be suitable to measure personal formaldehyde exposure at workplaces.

• Korean Journal of Environment and Ecology
• /
• v.27 no.5
• /
• pp.571-578
• /
• 2013

This study generated regression models through a direct harvesting method to estimate carbon storage and uptake by Pinus densiflora and Pinus koraiensis, the major evergreen tree species in urban landscape, and established essential information to quantify carbon reduction by urban trees. Open-grown landscape tree individuals for each species were sampled reflecting various diameter sizes at a given interval. The study measured biomass for each part including the roots of sample trees to compute the total carbon storage per tree. Annual carbon uptake per tree was quantified by analyzing radial growth rates of stem samples at breast height. The study then derived a regression model easily applicable in estimating carbon storage and uptake per tree for the two species by using diameter at breast height (DBH) as an independent variable. All the regression models showed high fitness with $r^2$ values of higher than 0.98. While carbon storage and uptake by young trees tended to be greater for P. densiflora than for P. koraiensis in the same diameter sizes, those by mature trees with DBH sizes of larger than 20 cm showed results to the contrary due to a difference in growth rates. A tree of P. densiflora and P. koraiensis with DBH of 25 cm stored 115.6 kg and 130.0 kg of carbon, respectively, and annually sequestered 9.4 kg and 14.6 kg. The study has broken new grounds to overcome limitations of the past studies which quantified carbon reduction of the study species by substituting, due to a difficulty in direct cutting and root digging of landscape trees, coefficients from forest trees such as biomass expansion factors, ratios of below ground/above ground biomass, and diameter growth rates.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.3
• /
• pp.334-341
• /
• 2007

Al film(135.5 nm thick) with Pd film(39.6 nm thick) was made by thermal evaporation method. Electrical resistance change by hydrogen absorption and desorption was measured with four point measurement method. Even though Al film(135.5 nm thick) did not absorb any hydrogen at room temperature, Al/Pd film absorbed hydrogen at upto 640 torr pressure. Hydrogen absorption kinetics was monitored by measuring resistance change of the sample in the temperature range from $25^{\circ}C$ to $40^{\circ}C$. Absorption activation energy of Al/Pd film was about 10.7 and 17.7 kcal/mol H for 1st stage and last stage respectively at 1 torr hydrogen pressure. This activation values are bigger than that of Pd film, but are much less than that of Al film. This result indicates there is possibility that Al can be storage material for hydrogen by using Pd film evaporation on it.

• Preventive Nutrition and Food Science
• /
• v.6 no.2
• /
• pp.91-95
• /
• 2001

Competitive indirect enzyme linked immunosorbent assay (Ci-ELISA) was used to obtain the preliminary data for the detection of irradiated beef. Ci-ELISA was individually formatted with polyclonal antibodies produced from 2 kinds of bovine proteins, myosin and bovine serum albumin (BSA). Beef round, loin and tender loin were vacuum-packaged and subdivided into 3 groups of 1) irradiation; 2) irradiation and chilled at 4$^{\circ}C$ for 7 day; 3) irradiation and frozen at 2$0^{\circ}C$ for 2 months to observe the changes under different storage and/or distribution conditions. Irradiation was performed at 3, 5 and 7 kGy. Protein solutions prepared from the sample were tested by formatted Ci-ELISA. Detected concentrations of myosin and BSA decreased with the increased irradiation dose in all samples with different reduction rates. Myosin was more susceptible to freezing than BSA. Samples irradiated at 5 kGy or above could be differentiated from non-irradiated ones by Ci-ELISA. These results indicate that immunological assay can be used as a detection method for irradiated beef.

• Journal of Hydrospace Technology
• /
• v.1 no.1
• /
• pp.29-40
• /
• 1995

This paper describes the procedure to predict steady and unsteady performances of a contrarotating propeller(CRP) by a mixed formulation of the boundary value problem(BVP) far the flow around a CRP. The blade BVP is treated by a classical vortex lattice method, whereas the hub BVP is solved by a potential-based panel method. Blades and trailing wakes are represented by a vortex and/or source lattice system, and hubs are represented by normal dipole and source distributions. Both forward and aft propellers are solved simultaneously, thus treating the interaction effect without iteration. The unsteady performance is computed directly in time domain. The new numerical procedure requires a large amount of storage and computing time, which is however no longer a limit in a modern computer system. Sample computations show that the steady performance compares very well with the experiments. The predicted unsteady behavior shows that the dominant harmonics of the total forces are multiples of not only the number of blades of the forward and aft propellers but also the product of both blade numbers. The magnitude of the latter harmonics, present also in uniform oncoming flow, may reach abort 50% of the mean torque for the aft propeller, which in turn may cause a serious vibration problem in the complicated contrarotating shafting system.

• Journal of Korea Water Resources Association
• /
• v.30 no.4
• /
• pp.347-355
• /
• 1997

In this study, the applicability of genetic algorithms into the parameter estimation of storage function method for flood routing model is investigated. Genetic algorithm is mathematically established theory based on the process of Darwinian natural selection and survival of fittest. It can be represented as a kind of search algorithms for optima point in solution space and make a reach on optimal solutions through performance improvement of assumed model by applying the natural selection of life as mechanical learning province. Flood events recorded in the Daechung dam are selected and used for the parameter estimation and verification of the proposed parameter estimation method by the split sample method. The results are analyzed that the performance of the model are improved including peak discharge and time to peak and shown that the parameter Rsa, and f1 are most sensitive to storage function model. Based on the analysis for estimated parameters and the comparison with the results from experimental equations, the applicability of genetic algorithm is verified and the improvements of those equations will be used for the augmentation of flood control efficiency.