• Journal of Food Hygiene and Safety
• /
• v.13 no.4
• /
• pp.419-424
• /
• 1998

An enzyme-linked immunosorbent assay (ELISA) was established for the detection of zearalenone by using monoclonal antibodies produced by Z-M-26 hybridoma cells when injected into a mouse and zearalenone-oxime-OV A conjugate. Zearalenone-oxime-OV A conjugates were diluted with carbonyl buffer, coated to 96 well microtiter plates at $4^{\circ}C$ overnight and blocked with 1% BSA overnight. One thousand times diluted antibody solution together with standard zearalenone or sample was added to 96-well microtiter plates and stood overnight. A secondary antibody conjugated with HRP was added and an hour later, enzyme substrate (TMBZ) solution was added for color develpment. Mter 30 minutes, coloring reaction was terminated by adding 2 N $H_2S0_4$ and the O.D. was measured at 450 nm. Detection range of this method was about 0.1~100 ppb. The established indirect competitive ELISA method was suitable for a rapid and effective analysis of zearalenone in agricultural products.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.11a
• /
• pp.89-94
• /
• 1998

Marine sponges are recognized as a plentiful source of diverse biologically active secondary metabolites. Recently, we have initiated a research to discover antitumor constituents from the marine sponges collected from Korean Waters. Marine sponges collected from the South Sea of Korea were screened for several biological activities including such as brine shrimp lethality and cytotoxicity. Significant brine shrimp lethality was detected in the crude extract of a two-sponge association of Poecillastra sp. and Jaspis sp. A cross-section of this sample showed two layers of morphologically distinct sponges. The thin and dirty yellow outer layer was identified as Poecillastra sp. (Pachastrellidae), the surface of which was very rough. The light-grey inner layer was identified as Jaspis sp. (Jaspidae), the surface of which was smooth. This two-sponge association appears to be consistent as these sponges were always found in associated form regardless of collection site or collection period. Investigation of the bioactive constituents monitored by brine shrimp lethality assay led to the isolation of pectenotoxin II (PTX2) and psammaplin A as causative compounds for the brine shrimp lethality. $^1$H- and $\^$13/C-nmr signals of PTX2 was fully assigned utilizing TOCSY, HETCOR, Long-range HETCOR, and Homonuclear J-resolved 2D experiments. PTX2 displayed very potent and selective cytotoxicities in the 60 cell line panel antitumor assay at the NCI. PTX2 has progressed to acute toxicity determination and in vivo antitumor assay at the NCI (Table 1). However, significant in vitro antitumor activity of PTX2 can not be affirmed in the in vivo assay.

• Journal of Korean Academy of Nursing
• /
• v.11 no.1
• /
• pp.7-17
• /
• 1981

The purpose of this study is to investigate the relationship between family attitude about mental illness and their general characteristics. The subjects for this study were a sample of 120 families selected from psychiatric ward of one university hospital, which is one national hospital in Seoul. Data was collected from July 1th to August 10th in 3980 used by Opinion about Mental Illness Scale (O.M.I.). The materials were analized by S.P.S.S. program. The findings of the study were as follows: A. Families' attitude toward mental illness shown ay this study was more negative compared to those of Korea1 nursing professorss, nurses and nursing students. B. Variables which influence families' attitude about mental illness: 1. There is no significant between general characteristics and authoritarianism. (p＞ 0.05) 2. Benevolence (Factor B) was found to be significantly related to such variables as religion, eucation levels, existence of mental patient in their an intimate friends. (P < 0.01) Families' attitude about benevolence was mere positive in families who have not relegion or having christion beliefs: haying the higher education levels; not having a mental patient in their an intimate friends. 3. Mental health ideology (Factor C) was found to be significantly related to variable experience of mental illness. (P < 0.01). families' attitude about mental health ideology was more positive in families who had experience of mental illness. 4. Social Restrictiveness (Factor D) was found to be significantly related to variable relationship between families and patients(P<0.01). An intimate friend's attitude about mental health Ideology was mon positive than that of parent and couple. 5. Interpersonal Etiology (Factor E) was found to be significantly related to variable religion (P < 0.05). Families' attitude about interpersonal etiology was more positive in families who have relegion.

• Journal of Biomedical and Translational Research
• /
• v.19 no.4
• /
• pp.92-102
• /
• 2018

The objectives of this study were to find out the plant to enhance immune activity among 42 kinds of foods frequently consumed by the Korean elderly consisting of 5 food groups and 5 wild plants. Each sample was assessed the immunoactive effect by measuring $NF-{\kappa}B/AP1$ gene expression, nitric oxide and cytokine production in $RAW-Blue^{TM}$ cell. Soybean sprouts of 47 plants showed the highest $NF-{\kappa}B/AP1$ gene expression at the level of $1.13{\pm}0.03$ (O.D. 650 nm) and Soritae, sweet potato, banana, apple, garlic, crown daisy, cabbage and Ailanthus altissima also had high activity of $NF-{\kappa}B/AP1$ gene in $RAW-Blue^{TM}$ cell stimulated by LPS. NO production of Ailanthus altissima was significantly higher than that of other plants and 16 plants of glutinous sorghum, black rice, Seoritae, Heuktae, sweet potato, banana, apple, garlic, mungbean sprouts, spinach, crown daisy, young pumpkin, cabbage, soybean sprouts, Actinidia arguta and Aster scaber were the next best activity. The above results selected 17 out of 47 plant samples. Moreover, soybean sprouts was significantly shown to increase $TNF-{\alpha}$ ($1,509.55{\pm}1.38pg/mL$) and $IL-1{\beta}$ ($54.56{\pm}1.08pg/mL$) cytokines in comparison with RAW-Blue cell stimulated by LPS. According to the results of in vitro evaluation, the ethanol extract of soybean sprout increased the production of immune-enhancing cytokines by proliferation of macrophages. In addition, $NF-{\kappa}B$ transcription factor activity and NO production ability were excellent, and it was selected as a material having excellent immunological activity.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.75.2-75.2
• /
• 2019

Low surface brightness (LSB) dwarf galaxies hold a key to resolve the small-scale problems of Lambda Cold Dark Matter (LCDM) paradigm such as missing satellites problem. Many recent studies found LSB dwarf galaxies around massive galaxies beyond Local Group up to 10Mpc. Motivated by this, we can increase the number of them by searching for LSB dwarf galaxies around galaxies up to 40Mpc. We use stacked deep (${\mu}_R{\sim}26.2mag\;arcsec^{-2}$) optical B, R-band images taken from Maidanak 1.5m telescope, one of facilities of Intensive Monitoring Survey of Nearby Galaxies (IMSNG) which monitored nearby galaxies in a day cadence from 2014 to 2016. Extended LSB sources in ambient regions of 16 nearby galaxies are selected using central surface brightness and total R magnitude criteria. After that, 24 LSB dwarf candidates are selected with visual inspection. To identify if the candidates are satellites or not, we are trying to compare the number density of LSB dwarf candidates around massive galaxies with those in Canada-France-Hawaii-Telescope Legacy Survey (CFHTLS) wide fields which have no dominant massive galaxies for control sample.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.395-399
• /
• 1997

Meat model emulsions ware prepared with salt-soluble protein and soybean oil. Effects of water-soluble protein (WSP) on the meat model emulsion treated with/without BHT during 8 day storage $5^{\circ}C$ under both dark and light illumination were studied by measuring POV and TBA. An emulsion without BHA and WSP was used as a control. Under light storage, there was no significant difference in peroxide values between the control and the sample treated with BHA except the 2nd day of storage. However, TBA values of the sample treated with BHA were significantly (p<0.05) lower than those of control except the 4th day of storage. TBA and POV of the samples treated with WSP and WSP + BHA were higher than control after 4th day of storage under light. That is, water soluble protein, which was composed mainly of myoglobin, increased lipid oxidation under light storage. The similar trends were also shown in the samples stored under dark. These results suggested that acceleration of lipid oxidation of the meat model emulsions by water soluble protein (WSP) under both light and dark might not be due to the singlet oxygen formation, but due to superoxide anion formed.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.513-518
• /
• 2005

Capillary electrophoresis (CE) method was developed to determine (+)-catechin and (-)-epicatechin contents in grape seed ethanol extract. CE separation was achieved using 100 mM phosphate and borate buffer at pH 6.0 as background electrolyte and fused silica capillary with 50 microns x 375 microns O.D. (effective length 20.0cm) maintained at $25^{\circ}C$. The applied voltage was 10kV, and detection was performed by DAD at 210 nm, Two catechins were well separated within 6 min with repeatability of <0.8% RSD for migration time and <2.0% RSD for peak area, and correlation coefficients higher than 0.994 were obtained from 58.0 to 174.0 mg/L with detection limit of 0.035 mg/L. Separated compounds were successfully determined. CE method was easy to handle and showed good reproducibility. CE method was compared with conventional coloring and HPLC methods, and main advantages of CE method were low amount of sample required, simple pre-sample treatment, good recovery rate, and short analysis time.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.8-16
• /
• 2024

Limestone (CaCO₃, calcium carbonate), which is used as a raw material in the portland cement and steel industry, emits CO₂ through decarbonation by high temperatures in the manufacturing process. To reduce CO₂ emissions by the use of raw materials like limestone, it has been proposed to replace limestone with various industrial by-products that contain CaO but less or none of the carbonated minerals, that cause CO₂ emissions. Loss of Ignition (LOI), Thermogravimetric analysis (TG), and Infrared Spectroscopy (IR) are used to quantitative the amount of CO₂ emission by using these industrial by-products, but CO₂ emissions can be either over or underestimated depending on the characteristics of by-product materials. In this study, we estimated CO₂ contents by LOI, TG, IR and DTG(Differential Thermogravimetric analysis) of calcite(CaCO₃) and samples that contain CO₂ in the form of carbonate and whose weight increases by oxidation at high temperatures. The test results showed for CaCO₃ samples, all test methods have a sufficient level of reliability. On the other hand, for the CO₂ content of the sample whose weight increases at high temperature, LOI and TG did not properly estimate the CO₂ content of the sample, and IR tended to overestimate compared to the predicted value, but the estimated result by DTG was close to the predicted valu e. From these resu lts, in the case of samples that contain less than a few percent of CO₂ and whose weight increases during the temperature that carbonate minerals decompose, estimating the CO₂ content using DTG is a more reasonable way than LOI, TG, and IR.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.169-181
• /
• 2007

Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.129-129
• /
• 2016

Graphene, as a single layer of $sp^2$-bonded carbon atoms packed into a 2D honeycomb crystal lattice, has attracted much attention due to its outstanding properties. In order to synthesize high quality graphene, transition metals, such as nickel and copper, have been widely employed as catalysts, which needs transfer to desired substrates for various applications. However, the transfer steps are not only complicated but also inevitably induce defects, impurities, wrinkles, and cracks of graphene. Furthermore, the direct synthesis of graphene on dielectric surfaces has still been a premature field for practical applications. Therefore, cost effective and concise methods for transfer-free graphene are essentially required for commercialization. Here, we report a facile transfer-free graphene synthesis method through nickel and carbon co-deposited layer. In order to fabricate 100 nm thick NiC layer on the top of $SiO_2/Si$ substrates, DC reactive magnetron sputtering was performed at a gas pressure of 2 mTorr with various Ar : $CH_4$ gas flow ratio and the 200 W DC input power was applied to a Ni target at room temperature. Then, the sample was annealed under 200 sccm Ar flow and pressure of 1 Torr at $1000^{\circ}C$ for 4 min employing a rapid thermal annealing (RTA) equipment. During the RTA process, the carbon atoms diffused through the NiC layer and deposited on both sides of the NiC layer to form graphene upon cooling. The remained NiC layer was removed by using a 0.5 M $FeCl_3$ aqueous solution, and graphene was then directly obtained on $SiO_2/Si$ without any transfer process. In order to confirm the quality of resulted graphene layer, Raman spectroscopy was implemented. Raman mapping revealed that the resulted graphene was at high quality with low degree of $sp^3$-type structural defects. Additionally, sheet resistance and transmittance of the produced graphene were analyzed by a four-point probe method and UV-vis spectroscopy, respectively. This facile non-transfer process would consequently facilitate the future graphene research and industrial applications.