• 터널과지하공간
• /
• 제29권4호
• /
• pp.243-261
• /
• 2019

미소진동기술을 활용한 계측 및 안전관리는 전통적인 방법에 비해 우수성이 인정되어 국내외 광산 등에서 활용되고 있다. 그러나 국내 지하광산의 비정형화와 채굴적과 암반 등이 혼재한 복잡한 구조는 미소 진동 전파속도 산정과 미소진동 신호의 초동발췌를 어렵게 한다. 본 연구에서는 여러 초동발췌방법과 차원에 따른 음원위치의 결정에 대해 실험적 연구를 수행하였다. 초동발췌방법은 FTC(First Threshold Cross), Picking window, AIC(Akaike Information Criterion)을 사용하였으며, 2차원 센서 배열일 때 2차원과 3차원 음원발생 실험을 수행하였다. 각 실험에서 음원위치결정 알고리즘은 반복법과 유전자 알고리즘을 사용하였다. 반복법은 센서 배열과 음원발생이 동차원인 경우 효과적이나 음원발생이 상위차원인 경우에는 적합하지 않았다. 반면, RCGA를 이용한 음원위치결정의 경우 상위차원 음원위치를 결정할 수 있었으나 계산속도가 다소 느렸다. 초동발췌방법의 정확도는 음원위치결정 방법에 따라 다르게 나타났으나, Picking window가 전반적으로 높은 정확도를 나타냈다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.92-96
• /
• 2007

Architecture design has need of daylight prediction to utilize daylight efficiently. But it is difficult to predict the exact value of available daylight in buildings. Using various lighting simulation software is not difficulty, but we can find different results under the same conditions. The purpose of this paper is to compare simulation values from various software such as Lumen-micro 2000, Lightscape 3.2, and Relux 2006. The same space and parameters of daylight(location of space and window, date, time, and skylight condition) are considered to conduct various simulation conditions.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 14TH KACG TECHNICAL MEETING AND THE 5TH KOREA-JAPAN EMGS (ELECTRONIC MATERIALS GROWTH SYMPOSIUM)
• /
• pp.65-70
• /
• 1998

The Spray-ICP technique uses the ICP(Inductively Coupled Plasma) of ultra-high temperature which is produced by r.f power. The ICP is well-kwown as a clean heat source for the preparation of pure ceramic particles because the ICP is a electrodeless-thermal plasma without contamination. In this study,{{{{ { SnO}_{2 } }}}} particles were sythesized from metal salt solution by Spray-ICP technique. The effects of concentration of solution, collecting location of powders were investicated. The prepared {{{{ { SnO}_{2 } }}}} particles from each concentration of solution had same crystalline phase(tetragonal {{{{ { SnO}_{2 } }}}}) a nd the mean size decreased in proportion to the increase of solution concentration. Each {{{{ { SnO}_{2 } }}}} p owders collector in reactor and electrostatic collector had same crystalline phase and morphologies. The mean size of {{{{ { SnO}_{2 } }}}} p articles prepared by Spray-ICP technique was below 30nm.

• 대한기계학회논문집A
• /
• 제29권6호
• /
• pp.895-903
• /
• 2005

In this paper, we present a cutter location (CL) surface deformation approach for constant scallop height tool path generation from triangular mesh. The triangular mesh model of the stereo lithography (STL) format is offset to the CL surface and then deformed in accordance with the deformation vectors, which are computed by the slope and the curvature of the CL surface. In addition, the tool path which is computed by slicing the deformed CL surface is inversely deformed by those same deformation vectors to a tool path with a constant scallop height. The proposed method is implemented, and a tool path generated by the proposed method is tested by simulation and by numerical control (NC) machining. The scallop height was found to be constant over the entire machined surface, demonstrating much better quality than that of mesh slicing, under the same constraints for machining time.

• Journal of Chest Surgery
• /
• 제22권6호
• /
• pp.1106-1110
• /
• 1989

We experienced 53 cases of tuberculous peripleural abscess, which had been proved by histopathological study, from Jan. 1980 to Dec. 1988. In 53 cases of abscesses, mean age was 25 years which was ranged from 1 year and 3 months old boy to 61 years old female [Male: Female=1.4: 1]. The location of the lesion was mainly right-sided [62%] and lateral predilection [53%]. In most of cases [85%], there was history of pulmonary tuberculosis and pleural thickening, but negative mycobacterial culture in the pus. Rib involved cases, confirmed by histopathologic examination, were 38.9% of all cases, which were all removed during operation. Combined pathologic lesions were all cleared at the same time, principally. There were 8 cases of recurred, of which at the same sided, 7 cases and contralateral sided, 1 case.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.17-20
• /
• 2009

Available daylight in inside offers comfortable view environment, and psychological and physical advantages to people in a room. Architecture design has need of daylight prediction for reflection efficiently daylight. But it is difficult to predict the illuminance values in daylight system. Using various lighting simulation software is easy and simple, but we can find different results under the same conditions. This study compares with illuminance values from simulation (Lightscape 3.2, RELUX 2007, RADIANCE 3.9) and Mock-up experiment with the same space and parameter of daylight (location of space and window, date, time and sky condition).

• 대한수학회지
• /
• 제56권2호
• /
• pp.311-327
• /
• 2019

The aim of this paper is to extend the applicability of Gauss-Newton method for solving underdetermined nonlinear least squares problems in cases not covered before. The novelty of the paper is the introduction of a restricted convergence domain. We find a more precise location where the Gauss-Newton iterates lie than in earlier studies. Consequently the Lipschitz constants are at least as small as the ones used before. This way and under the same computational cost, we extend the local as well the semilocal convergence of Gauss-Newton method. The new developmentes are obtained under the same computational cost as in earlier studies, since the new Lipschitz constants are special cases of the constants used before. Numerical examples further justify the theoretical results.

• ETRI Journal
• /
• 제45권2호
• /
• pp.203-212
• /
• 2023

In this study, we developed a co-located and space-shared multiple-input multiple-output (MIMO) antenna module with a modular design and high integration level. The proposed antenna pair includes a half-wavelength loop antenna and a dipole-type antenna printed on the front and back sides of a compact modular board. Owing to their modal orthogonality, these two independent antenna elements are highly self-isolated and free of additional decoupling components, even though they are assembled at the same location and within the same space. Thus, the proposed antenna is attractive in 5G MIMO systems. Furthermore, the proposed co-located and space-shared MIMO antenna module was employed in a 5G smartphone to verify their radiation and diversity performances. A 12 × 12 MIMO antenna system was simulated and fabricated using the proposed module. Based on the results, the proposed module can be employed in large-scale MIMO antenna systems for current and future terminal devices owing to its high integration, compactness, simple implementation, and inherent isolation.

• 한국태양에너지학회 논문집
• /
• 제31권4호
• /
• pp.27-33
• /
• 2011

To find effective way of the production of distilled water for drought and flood with solar radiation, three boxes were made same base each 1000mm ${\times} $1000mm and tops are 45 degree. Individual boxes contained the sea water, rain water and surface water were placed at the same location and same time. Condensation of each box has been compared. On clear day production of distilled water in the box with sea water was 36% and 32% less than boxes with rain water and surface water. The maximum condensation reached when the temperature of the top and bottom parts are equal. As concentration of sea water increased production of distilled water was decreased. In the box with sea water, the surface temperature was lower than 3cm below the surface. Optimum collector area for producing distilled water 2000ml of these three boxes were $3.75m^2$

• Structural Engineering and Mechanics
• /
• 제84권1호
• /
• pp.85-100
• /
• 2022

The updated Turkish Building Earthquake Code has been significantly renovated and expanded compared to previous seismic design codes. The use of earthquake ground motion levels with different probabilities of exceedance is one of the major advances in structural mechanics with the current code. This study aims to investigate the earthquake performance of steel structure in settlements with different seismic hazards for various earthquake ground motion levels. It is focused on earthquake and structural parameters for four different ground motion levels with different probabilities of exceedance calculated according to the location of the structure by the updated Turkish Hazard Map. For this purpose, each of the seven different geographical regions of Turkey which has the same seismic zone in the previous earthquake hazard map has been considered. Earthquake parameters, horizontal design elastic spectra obtained and comparisons were made for all different ground motion levels for the seven different locations, respectively. Structural analyzes for a sample steel structure were carried out using pushover analysis by using the obtained design spectra. It has been determined that the different ground motion levels significantly affect the expected target displacements of the structure for performance criteria. It is noted that the different locations of the same earthquake zone in the previous code with the same earthquake-building parameters show significant variations due to the micro zoning properties of the updated seismic design code. In addition, the main innovations of the updated code were discussed.