• 제목/요약/키워드: Salt removal speed

검색결과 6건 처리시간 0.022초

음식폐기물바이오차의 염분 제거 및 농업적 활용 (Salt Removal and Agricultural Application of Food Waste-Biochar)

  • 김신실;노준석;이재훈;최아영;이슬린;박유진;박종환;이영한;서동철
    • 한국환경농학회지
    • /
    • 제42권2호
    • /
    • pp.159-167
    • /
    • 2023
  • Food waste (FW) emissions in South Korea amounted to 4.77 million tons in 2021, and continue to increase. Various technologies have been developed to treat FW, with recent research focusing on biochar production through pyrolysis to reduce FW. However, the agricultural application of food waste-biochar (FWBC) is limited by the salt accumulated during pyrolysis. This study investigated salt removal from and the kinetic characteristics of FWBC, and subsequently evaluated its agricultural applications. FW was pyrolyzed at 350℃ for 4 h, and subsequently washed for 0.1, 0.25, 0.5, 0.75, 1, 5, 15, and 30 min to remove salt. FWBC had a salt concentration of 5.75%, which was effectively removed through washing. The salt concentration decreased rapidly at the beginning (1 min) and then slowly decreased, unlike in FW, in which the salt decreased continuously and slowly. The salt removal speed constant (K) was 1.5586 (Stage 1, FWBC) > 0.0445 (Stage 2, FWBC) > 0.0026 (FW). In a lettuce cultivation experiment, higher biomass was achieved using washed FWBC than when using unwashed FWBC and FW, and soil properties were improved. Overall, these findings suggest that although FW reduction using pyrolysis causes a salt accumulation problem, the salt can be effectively removed through washing. The use of washed FWBC can enhance plant growth and soil properties.

Removal of Cl from the Incineration Ash of Domestic Municipal Solid Waste

  • Han, Gi-Chun;Kim, Hyung-Seok;Ahn, Ji-Whan;Kim, Hwan
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.628-632
    • /
    • 2001
  • The removal rate of Cl from municipal solid waste incineration(MSWI) ash(bottom ash and fly ash) by washing was investigated. The Cl contents in the bottom ash and fly ash were 2.6-3.0% and 25-30% respectively, and KCl, NaCl, CaCIOH and friedel's salt were main components. From the results on the effects of washing time and temperature, the Cl contents in the bottom ash and fly ash were decreased up to 0.3% and 2.0% respectively by using of water as a solvent within 30 min at 2$0^{\circ}C$, 300 rpm of agitation speed and 10 of liquid/solid ratio. It is expected that the removal of Cl from the incineration ash by washing could make use of the ash for a cement raw material and so on.

  • PDF

동질 사배체 탱자의 종자 발아 증진과 염류 과잉에 따른 엽록소 형광 반응 (Improvement of Seed Germination in a Spontaneous Autotetraploid of Poncirus and Chlorophyll Fluorescence of Seedlings in Salt Stress)

  • 채치원;윤수현;박재호;김민주;한승갑;강석범;고상욱;한상헌
    • 생명과학회지
    • /
    • 제23권9호
    • /
    • pp.1079-1087
    • /
    • 2013
  • 향상된 종자 파종법과 비료 투입에 따른 신속한 발아와 생육 촉진된 감귤 대목 나무는 직접적인 근계의 이용면에서 더 큰 대목 특성 연구의 기회를 제공한다. 본 연구는 자연발생적인 대목 계통의 발아와 생육상에 대한 종피 제거와 비료 농도 수준에 따른 생리 반응 및 염류 스트레스에 대한 4배체의 내성 정도에 관해 평가했다. 2배체와 4배체의 종자는 박피 처리된 군과 무처리한 군을 포트에 각각 파종하여 비료 농도는 0, 2, 4, 6, 8 및 $10g{\cdot}l^{-1}$ 수준으로 시험설계는 $2{\times}6$ 요인(종피 제거${\times}$비료 농도)상의 난괴법을 따랐다. 또한 염 스트레스를 부여하기 위한 비료 농도는 0, 10, 20 및 $30g{\cdot}l^{-1}$ 수준으로 하였다. 기내에서 종피를 제거하여 치상한 처리는 무처리인 원형 그대로의 종자와는 달리 발아력이 66.7-80% 범위 내에서 향상되었다. 종피를 제거한 2배체 처리구에서는 무처리와는 달리 양액 농도가 증가할수록 수고도 증가하였다. 종피 제거는 2배체와 4배체 간에 발아를 촉진하고 높은 신장 생장을 유도하였고 영양 생장은 두 부류의 대목에서 더 농도가 높을수록 증가했다. 염 스트레스 처리 11일 후 Fv/Fm 값은 2배체에서는 0.4였지만 건전한 상태를 보이는 4배체는 0.8를 나타냈다. 종피 제거는 탱자 종자의 발아를 향상시킬 수 있으며 4배체 탱자는 2배체 탱자와 달리 염 스트레스에 대한 저항성이 있다고 판단된다.

수세에 의한 생활폐기물 소각재 중 비산재로부터 염소성분의 제거 (Removal of Chlorine from Fly Ash in Municipal Solid Waste Incineration Ash by Water Washing)

  • 안지환;한기천;김형석
    • 자원리싸이클링
    • /
    • 제10권5호
    • /
    • pp.36-43
    • /
    • 2001
  • The chlorine component in fly ash from municipal solid waste incineration ash was removed by water washing for the purpose of recycling fly ash as a raw material of ordinary portland cement. The samples were a different kind of 리y ashes using $Ca(OH)_2$and NaOH as media of wet scrubber for flue gas cleaning. The content of soluble salts of fly ash using $Ca(OH)_2$and NaOH was 32.8%, 50.1% and the content of chlorine component, 22.9% and 26.0% respectively, which was KCl, NaCl, CaC1OH mainly. When each fly ash was washed using water under conditions of a agitation speed of 300 rpm, a liquid to solid ratio of 10, most soluble salts in fly ash were dissolved within 30 minutes and the content of chlorine component in ash was diminished to the content of 4.4%, 2.O% at $20^{\circ}C$ and 1.7%, 0.8% at $50^{\circ}C$ respectively. And the main compound of residual chlorine component in ash after water washing was friedel`s salt ($3CaO.A1_2$$O_3$.$CaCl_2$.$10H2$O). From analysis results of water quality for wastewater by water washing, the components exceeding discharged wastewater standard were only Pb and Cd. But As pH was controlled to 10 with addition of $CO_2$(g) or $Na_2$$_CO3$in water, the concentration of heavy metals such as Pb and Cd was also under discharged wastewater standard.

  • PDF

실리카졸의 이온전도도 변화에 따른 사파이어 웨이퍼의 연마 특성 (Characteristics of Sapphire Wafers Polishing Depending on Ion Conductivity of Silica Sol)

  • 나호성;조경숙;이동현;박민경;김대성;이승호
    • 한국재료학회지
    • /
    • 제25권1호
    • /
    • pp.21-26
    • /
    • 2015
  • CMP(Chemical Mechanical Polishing) Processes have been used to improve the planarization of the wafers in the semiconductor manufacturing industry. Polishing performance of CMP Process is determined by the chemical reaction of the liquid sol containing abrasive, pressure of the head portion and rotational speed of the polishing pad. However, frictional heat generated during the CMP process causes agglomeration of the particles and the liquidity degradation, resulting in a non-uniform of surface roughness and surface scratch. To overcome this chronic problem, herein, we introduced NaCl salt as an additive into silica sol for elimination the generation of frictional heat. The added NaCl reduced the zata potential of silica sol and increased the contact surface of silica particles onto the sapphire wafer, resulting in increase of the removal rate up to 17 %. Additionally, it seems that the silica particles adsorbed on the polishing pad decreased the contact area between the sapphire water and polishing pad, which suppressed the generation of frictional heat.

제설제 사용으로 인한 노면 미끄럼저항 특성 연구 (A Study of Skid Resistance Characteristics by Deicing Chemicals)

  • 이승우;우창완
    • 대한토목학회논문집
    • /
    • 제26권5D호
    • /
    • pp.813-819
    • /
    • 2006
  • 미끄럼 저항은 타이어와 도로노면의 마찰저항을 나타내는 지수로 차량의 주행 안전성에 지대한 영향을 미친다. 타이어의 상태, 노면의 마모도, 주행속도, 노면의 건조, 습윤, 결빙 등에 따라 미끄럼저항의 크기는 달라진다. 특히 겨울철 도로노면의 경우 강설 후 기온강하에 도로포장표면이 결빙이 발생할 경우 미끄럼저항이 급격히 저하되며, 미끄럼저항을 회복하고자 제설 작업을 수행하게 된다. 제설작업 후에는 습윤상태로 노면조건이 바뀌게 되는데, 제설제가 노면에 잔류하게 되면 일반적인 습윤상태에서의 미끄럼저항을 확보치 못할 수 있다. 본 연구에서는 국내 포장도로의 대다수를 차지하는 밀입도 아스팔트와 타이닝 콘크리트 포장노면에 대하여 실험실 조건에서 노면 결빙시, 제설중 제설후 잔류물이 노면에 있을 경우의 조건에서의 미끄럼저항을 정량적으로 평가하였다. 연구 결과 노면 결빙시 미끄럼저항 회복시간은 수용액 살포방법이 고체염 살포방법 보다 빠르며 제설제 중에는 소금이 가장 빠르게 나타났다. 노면에 잔류한 제설제는 콘크리트 시편이 아스팔트 시편보다 미끄럼저항 값이 높게 나타났으며 습윤 노면 상태와 비교시 미끄럼저항 확보율은 54~80% 이다.