• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.818-823
• /
• 2005

An overview of 30 feet sailing yacht design is presented, with an emphasis on the factors contributing to start-up popularization. After prescribing the configurations of the purposed yacht, the design of the hull form with a rudder and a keel, are schematically described. Also the determinations of the dimensions of the sail and rig are performed.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.6
• /
• pp.469-474
• /
• 2020

This study aims to improve the price competitiveness of a steering system with a relatively high cost portion among sail yacht components. Hence, the components of the steering system were analyzed, and steering system modularization was proposed. The fabrication processes before and after the application of modularization was presented. For modularization, primary components such as the pedestals and quadrants of the steering system were developed, and the structural safety of the components was reviewed. It was confirmed that the manufacturing cost of the developed steering system decreased by approximately 33% compared with the existing system. The new steering system presented herein is expected to contribute to the localization of components and price competitiveness of sail yachts.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.116-124
• /
• 2006

A model test was carried out, in order to verify the hydrodynamic performances of public 30 feet class sailing yacht. In the initial design stage, the performances and the running attitude of sail yacht including the hull form and sail plan, appendages were estimated by VPP, from which made the representative test conditions. A new experiment system such as captive model device was composed because the running attitude could be changed by wind conditions. The test results show that the minimum resistance is generated in the heeling 20 degree. which was expected in the initial design stage. It is thought to be the useful informations that the keel has an effects on hydrodynamic forces and resistance differences between the upwind and the downwind condition. Also this paper is associated with the state-of-the-art of calculating sailing yacht performance as this is performed in velocity Prediction program (VPP) The VPP results shows a typical shape of a sailing yacht and the designed yacht has the best performance at 120 degree angle of true wind with 20 knots.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.824-831
• /
• 2005

A model test was carried out, in order to verify the hydrodynamic performances of public 30 feet class sailing yacht. In the initial design stage, the performances and the running attitude of sail yacht including the hull form and sail plan, appendages were estimated by VPP, from which made the representative test conditions. A new experiment system such as captive model device was composed because the running attitude could be changed by wind conditions. The test results show that the minimum resistance is generated in the heeling 20 degree, which was expected in the initial design stage. It is thought to be the useful informations that the keel has an effects on hydrodynamic forces and resistance differences between the upwind and the downwind condition. Also this paper is associated with the state-of-the-art of calculating sailing yacht performance as this is performed in velocity prediction program (VPP). The VPP results shows a typical shape of a sailing yacht and the designed yacht has the best performance at 120 degree angle of true wind with 20 knots.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.1 s.139
• /
• pp.24-33
• /
• 2005

It is important to understand the flow characteristics around two sails of a sloop yacht. In this paper a computational aerodynamic investigation is performed over sail-like airfoils similar to the main and iIb sails of a 30 feet sailing yacht. Lift and drag are calculated for various conditions of slit distance between the two sails and overlapped length of the jib sail. The thrust and CE(center of effort) of the sail system are obtained. It is found that the combination of two sails produces the thrust force larger than the sum of the thrust force of each sail standing separately and the slit distance of the two sails are important factor to increase lift force.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.4 s.148
• /
• pp.431-439
• /
• 2006

Due to the limitation of size of the test section, blockage effects could not be avoided in the model test of yacht sails for common wind tunnels. In this paper, a numerical analysis is performed to investigate the blockage effects on the lift and drag forces measured from wind tunnel experiments for a 30 feet sloop yacht sail. Complex airflows around the jib and main sails including three-dimensional flow separations are calculated for various close-hauled conditions. It is found that the blockage of a wind tunnel changes the flow separation and consequently the lift and drag forces of the sails, especially the main sail, reduce and increase, respectively, due to the blockage effects.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.5
• /
• pp.421-430
• /
• 2018

The shape of a yacht sail made of thin fabric materials is easily deformed by wind speed and direction and it is affected by the deformation of the standing rig such as mast, boom, shrouds, stays and spreaders. This deformed sail shape changes the air flow over the sail, it makes the deformation of the sail and the rig again. To get a sail performance accurately these interactive behavior of sail system should be studied in aspects of the aerodynamics and the fluid-structure interaction. In this study aerodynamic analysis for the sail system of a 30 feet sloop is carried out and the obtained dynamic pressure on the sail surface is applied as the loading condition of the calculation to get the deformations of the sail shape and the rig. Supporting forces by rig are applied as boundary condition of the structure deformation calculations. And the characteristics of the air flow and the dynamic pressure over the deformed sail shape is investigated repeatedly including the lift force and the location of CE.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.1
• /
• pp.33-40
• /
• 2013

Since most of yacht sails are made of thin fabric, they form cambered sail shape that can efficiently generate lift power by aerodynamic interaction and by external force delivered from supporting structures such as mast and boom. When the incident flow and external force alter in terms of volume or condition, the shape of sail also change. This deformation in shape has impact on the peripheral flow and aerodynamic interaction of the sail, and thus it is related to the deformation of the sail in shape again. Therefore, the precise optimization of aerodynamic performance of sail requires fluid-structure interaction (FSI) analysis. In this study, the simplified sail without camber was under experiment for one-way FSI that uses the result of flow analysis to the structural analysis as load condition in an attempt to fluid-structure interaction phenomenon. To confirm the validity of the analytical methods and the reliability of numerical computation, the difference in deformation by the number of finite element was compared. This study reproduced the boundary conditions that sail could have by rigs such as mast and boom and looked into the deformation of sail. Sail has non-linear deformation such as wrinkles because it is made of a thin fabric material. Thus non-linear structural analysis was conducted and the results were compared with those of analysis on elastic material.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.125-133
• /
• 2006

It is important to understand flow characteristics and performances of sails for both sailors and designers who want to have efficient thrust of yacht In this Paper the viscous flows around sail-like rigid wings, which are similar to main and jib sails of a 30 feet sloop, are calculated using a CFD tool. Lift, drag and thrust forces are estimated for various conditions of gap distance between the two sails and the center of effort of the sail system is obtained. Wind tunnel experiments are also carried out to measure aerodynamic forces acting on the sails system and to validate the computation. It is found that the combination of two sails produces the lift force larger than the sum of that produced separately by each sail and the gap distance between the two sails is an important factor to determine total lift and thrust.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.54-61
• /
• 2012

This study surveyed the preparation of 8oz coated fabric and the physical property of the coated fabric according to the treated condition for the sail yacht. And the coated fabrics were compared with the performance of overseas products for verification. Physical properties of the coated fabric treated with non-yellowing functional polyurethane resin were examined according to the treatment condition such as compression and ageing treatments. Finally, yellowing fastness to light for 60 hours was assessed. Considering the compression condition after coating, good physical property was obtained at $6kgf/cm^2$. Also, the performance of yellowing fastness was similar to performance of overseas goods.